hooked up the VAFC+450cc hack today
08-29-2002, 11:17 AM
#1
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2002
Location: Carlisle, PA, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
hooked up the VAFC+450cc hack today
the car runs like it came with turbo from the factory. according to my apexi turbo timer, the a/f is around 14.1~14.3 at idle and crusing and around 11.8~12.2 at full boost. i'm runing at 8 psi right now, but will run 10-12psi after i put the cometic gasket in.
08-29-2002, 11:55 AM
#2
Honda-Tech Member
Join Date: Apr 2002
Location: Jax/St. Aug, Fl
Posts: 1,019
Likes: 0
Received 0 Likes
on
0 Posts
Re: hooked up the VAFC+450cc hack today (rice4life)
Always glad to hear that the hack works so well, I forget who thought of it, but nice going.
Best of luck on the project. What settings? -50, -45, -40 or like a slope?
Best of luck on the project. What settings? -50, -45, -40 or like a slope?
08-29-2002, 12:23 PM
#3
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2002
Location: Carlisle, PA, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Re: hooked up the VAFC+450cc hack today (Pelican)
-35 all across for narrow and wide throttle. i think the credit goes to liam821.
https://honda-tech.com/zerothread?id=137901&page=1
https://honda-tech.com/zerothread?id=137901&page=1
08-29-2002, 12:30 PM
#4
Join Date: May 2002
Location: IL, US
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Re: hooked up the VAFC+450cc hack today (rice4life)
Nice! I try it on my SC and it doesn't work too good. RPM surging and it feels like my AC is on. I don't have a way to read my a/f except the automer gauge which sucks! For some odd reason the hack works better on turbo
Thread
Thread Starter
Forum
Replies
Last Post
hondaEg_808
Forced Induction
7
06-11-2010 10:38 AM
