<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I Have an STD &raquo;</TD></TR><TR><TD CLASS="quote">i have one of these too. anyone run one on a B18b? thats what i'll be running mine on</TD></TR></TABLE>


this helps tremediously

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pittbullracer &raquo;</TD></TR><TR><TD CLASS="quote">this helps tremediously</TD></TR></TABLE>

douchbag, its already been identified as a Borg Warner/IHI GM-8, so i figured the other people who knew what it was might have aquired their knowledge from personal experience. it was fair to ask the question, so f uck off

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I Have an STD &raquo;</TD></TR><TR><TD CLASS="quote">

douchbag, its already been identified as a Borg Warner/IHI GM-8, so i figured the other people who knew what it was might have aquired their knowledge from personal experience. it was fair to ask the question, so f uck off</TD></TR></TABLE>

are you done ******* crying you ****** bitch i know its a borg warner gm8 turbo off a ****** 6.5l deisel truck i am looking for specs on it i have searched and seached but havent found anything but what it comes from so no more thread jacking you TOOL

 

bump

 

and were to get down pipe flange from ?

 

well, even though you were a total dick, i'll tell you. 1st off you need to have the exhaust housing machined down so it looks like this




see how the wastegate hole sits flush with the rest of the exhaust housing?? you have to do this or you will bypass exhaust gasses to the turbine wheel, KILLING spool time.

the downpipe flange can be purchased from Blaast Performance. since im feeling so INCREDIBLY nice today, i'll even link you.

http://www.blaastperformance.c...esbof

now, dont be a dick

 

what a guy, verbally attacked and still is willing

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I Have an STD &raquo;</TD></TR><TR><TD CLASS="quote">well, even though you were a total dick, i'll tell you. 1st off you need to have the exhaust housing machined down so it looks like this




see how the wastegate hole sits flush with the rest of the exhaust housing?? you have to do this or you will bypass exhaust gasses to the turbine wheel, KILLING spool time.

the downpipe flange can be purchased from Blaast Performance. since im feeling so INCREDIBLY nice today, i'll even link you.

http://www.blaastperformance.c...esbof

now, dont be a dick</TD></TR></TABLE>

thats what im talking about thanks