what's the power output of these turbo's and average spool time?

 

mine supports about 700crank hp, will make 500whp on pump at 18psi. with all the math me and my buddy have done i should see positive manifold pressure by about 3500

 

i'd love a good explanation on how to calculate for turbine maps.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost &raquo;</TD></TR><TR><TD CLASS="quote">mine supports about 700crank hp, will make 500whp on pump at 18psi. with all the math me and my buddy have done i should see positive manifold pressure by about 3500</TD></TR></TABLE>

what turbo is that?

 

custom built turbo using a variant of the 82mm gt37 compressor wheel

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost &raquo;</TD></TR><TR><TD CLASS="quote">mine supports about 700crank hp, will make 500whp on pump at 18psi. with all the math me and my buddy have done i should see positive manifold pressure by about 3500</TD></TR></TABLE>

math is great an all but not proven....lets see some dyno's of this GT35r "killer" first

 

you will in about a month, car has to get painted first. but considering the turbo was actually flow tested and put a computer model and all tests were done by a garrett engineer. its gonna pwn the gt35r

 

and i thought a GT35R was a huge *** turbo then something bigger comes out.

 

hehe, my next turbo is going to be roughly double the size of my current one

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">I'll sell you some custom Boostfed Racing stickers </TD></TR></TABLE>

I never got offered any custom stickers.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost &raquo;</TD></TR><TR><TD CLASS="quote">mine supports about 700crank hp, will make 500whp on pump at 18psi. with all the math me and my buddy have done i should see positive manifold pressure by about 3500</TD></TR></TABLE>

How long until its fully spooled up?

 

IF you guys are considering the 3767, its a badass turbo.
But word has it PTE has some Ball Bearing 4067's.
That Will be a badass turbo
Anxious to use one on something

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by daveG &raquo;</TD></TR><TR><TD CLASS="quote">

I never got offered any custom stickers.

How long until its fully spooled up?</TD></TR></TABLE>

lol, boostfed knows what im doing over here. tee hehehe

well i havent had it on the motor yet, but my guess would be 4500 or so. ive got a fully built motor with a very agressively ported head, everythign ceramic coated, etc. even both sides of the turbo

 

has anyone used this turbo(gt3782) im about to put on a 3.8 liter engine
and was wondering what kinda power and where it might spool also they
said there are no exhaust housing for it?