fully built b20motor practically gone.. swaping in next motor.. B18B or B20B?? help me decide
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: DiEGO, CA, USA
Posts: 6,954
Likes: 0
Received 0 Likes
on
0 Posts
fully built b20motor practically gone.. swaping in next motor.. B18B or B20B?? help me decide
plannin on buyin either a JDM B18B LS Long Block or a JDM B20B Long Block from HMOTORS... dont know which one to choose swap into my turbo setup.. ive read that b20's arnt so safe for turbo b/c of weaker sleeves or something and LS's should last fine stock at low boost 6-10 psi DD. wondering if anyone else has any input on this.. ive searched and seen most ppl go with LS turbo but thast because they already had LS motor in their car.. also read ppl like to upgrade from LS to B20 b/c more TQ. wondering Which one should i choose to continue my DD boosted Teg. and i only have enough money to buy this long block and swap it in.. =\ or else i woulda rebuilt my b20 motor =X
here's my set up:
• Turbonetics T3/T4 Hybrid Turbocharger
• Rev Hard Turbo Manifold
• Spearco Front Mount Intercooler
• RC 550cc Fuel Injectors
• HKS Super Sequential BOV
• Mugen Thermostat
• Samco Radiator Hoses
• JDM Integra 1998 GS-R Transmission
• JDM Integra 1998 GS-R Oil Pan
here's my set up:
• Turbonetics T3/T4 Hybrid Turbocharger
• Rev Hard Turbo Manifold
• Spearco Front Mount Intercooler
• RC 550cc Fuel Injectors
• HKS Super Sequential BOV
• Mugen Thermostat
• Samco Radiator Hoses
• JDM Integra 1998 GS-R Transmission
• JDM Integra 1998 GS-R Oil Pan
#2
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: DiEGO, CA, USA
Posts: 6,954
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built b20motor practically gone.. swaping in next motor.. B18B or B20B?? help me decide (J
nvm, going JDM b18b.. b20 cracks if not sleeved.
Modified by Jesse. at 5:03 PM 7/18/2006
Modified by Jesse. at 5:03 PM 7/18/2006
#4
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: DiEGO, CA, USA
Posts: 6,954
Likes: 0
Received 0 Likes
on
0 Posts
Re: fully built b20motor practically gone.. swaping in next motor.. B18B or B20B?? help me decide (J
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beroll_eg6 »</TD></TR><TR><TD CLASS="quote">b18b is the way to go</TD></TR></TABLE>
im gettin a JDM LS motor.. i know theres a diff in 9.0:1 from 9.4:1 compression. any other difference that i would need to know for a turbo setup. i believe its juss different pistons..
im gettin a JDM LS motor.. i know theres a diff in 9.0:1 from 9.4:1 compression. any other difference that i would need to know for a turbo setup. i believe its juss different pistons..
Thread
Thread Starter
Forum
Replies
Last Post