i have some 450cc dsm fuel injectors do they work as a direct replacement? meaning will they plug right in on the fuel rail and wiring harness or do i need those parts from the dsm to make them work? i want to put 10 pounds to a stock ls b18 and i need to upgrade fuel. this is why i ask.

 

bore out the stock injectors bottom seals.but you can get a resistor box or go to radio shack and get single resisters

 

where do the resistors go?

 

Booya!!!

http://www.homemadeturbo.com/tech_pr...ors/index.html

 

if you need to install a resitor box go here for help: http://www.c-speedracing.com/howto/r...box_wiring.php

next time you ask a question about a car, tell us what the car is...I.E. what model, year, engine, ect.

 

no boring is really needed, and if you can get them, i would opt for Lancer Evo 560cc injectors. They are the same form factors are the DSM 450cc

 

bump .... its a 92 integra. so basically as long as i put resistors inline with the yellow/black wires im all set right? 10 amp 10 ohm?