91integraLSVTEC

took about 10 hrz, first time installing a turbo and it was sort of easy =o) everything went in smoothly, installing the fcu was the easiest part =op after working on my all motor integra for 5 yrs, i decieded to turbo charge my beater. i can say i'm very happy with the power i'm getting, midrange rocks during city driving! the car is so much fun to drive i put 125 miles on it in one day. although 5.5 psi is alot of fun, i already feel the need to up the boost some, i already ordered rc 440cc injectors, JR 5" intercooler and now to chose a good bov. my question is where do i mount that in the greddy kit?


thanks in advance

Civicman86

You can mount the BOV wherever you want (im guesing that is what you were asking). Most people say to keep it as far from the tb is you can (hence why you see some people run it on the intercooler) but not really a necissity. I would just put it in the common spot in the middle of the straight charge pipe.

Drag_On

it if doesn't have a flange on the charge pipe - you'll have to get a flange installed on it that fits the BOV you choose. I thought the GReddy kit came with one... Obviously not..

Yes, just install the flange on the charge pipe about a foot from the TB. Goodlcuk and congrats

sadangryboi

the base kits do not come with piping to allow a intercooler or a flange to put a bov...thats why its at 5.5...u dont need those items for that low boost. thats whys it legal and such...

to put an intercooler on the kit u would either have to buy a pipe kit...or get a custom one

to put the bov...just buy a flange for the bov u want to use...cut a hole in the piping "about a foot from the tb" and get the flange welded in