Explain Hondat boost cut/limiter
Thread Starter
Joined: Jun 2003
Posts: 56
Likes: 0
From: Dallas
Explain Hondata boost cut/limiter
Can somebody please explain to me how the Hondata boost cut/limiter thing works?
Say for example I set my boost controller to 7psi and my Hondata boost cut to 7.5psi. How does the Hondata keep it from going to 8psi?
TIA
Modified by tgrace at 6:21 PM 9/26/2003
Say for example I set my boost controller to 7psi and my Hondata boost cut to 7.5psi. How does the Hondata keep it from going to 8psi?
TIA
Modified by tgrace at 6:21 PM 9/26/2003
Honda-Tech Member
Joined: May 2002
Posts: 3,448
Likes: 0
From: Illanoise, USA
Re: Explain Hondata boost cut/limiter (tgrace)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tgrace »</TD></TR><TR><TD CLASS="quote">Can somebody please explain to me how the Hondata boost cut/limiter thing works?
Say for example I set my boost controller to 7psi and my Hondata boost cut to 7.5psi. How does the Hondata keep it from going to 8psi?
TIA
Modified by tgrace at 6:21 PM 9/26/2003</TD></TR></TABLE>
It cuts fuel. Just like the rev limiter.
Say for example I set my boost controller to 7psi and my Hondata boost cut to 7.5psi. How does the Hondata keep it from going to 8psi?
TIA
Modified by tgrace at 6:21 PM 9/26/2003</TD></TR></TABLE>
It cuts fuel. Just like the rev limiter.
Honda-Tech Member
Joined: Jan 2002
Posts: 1,822
Likes: 1
From: Colorado Springs, CO, USA
Re: Explain Hondata boost cut/limiter (boosted hybrid)
Is it just the map sensor reading that causes this, or are there other factors that will trigger boost cut to engage? I've got a problem where boost cut is engaging even through I've got it disabled in the ROM
Thread
Thread Starter
Forum
Replies
Last Post
philipwight
Forced Induction
5
May 4, 2004 08:48 PM
JusT a Cx
Forced Induction
7
Feb 24, 2004 05:58 PM
