ETs for Turbod SOHCs

Thread Tools
 
Search this Thread
 
Old Mar 9, 2003 | 08:10 PM
  #1  
Sleeping4drLS's Avatar
Thread Starter
 
Joined: Aug 2002
Posts: 1,010
Likes: 0
From: South of Portland, OR
Default ETs for Turbod SOHCs

Just want to see some quarter mile times for you single cam guys...
Reply
Old Mar 9, 2003 | 08:47 PM
  #2  
98civicEX's Avatar
Member
 
Joined: Mar 2002
Posts: 1,703
Likes: 1
From: Somewhere in, USA
Default Re: ETs for Turbod SOHCs (Sleeping4drLS)

1.9 60 ft, 8.81 1/8th 80mph trap, guessing high 13's
Reply
Old Mar 9, 2003 | 09:10 PM
  #3  
eg6turbo's Avatar
Honda-Tech Member
 
Joined: Feb 2003
Posts: 728
Likes: 0
From: SF
Default Re: ETs for Turbod SOHCs (98civicEX)

read the sig
Reply
Old Mar 9, 2003 | 09:22 PM
  #4  
5thgen's Avatar
Honda-Tech Member
20 Year Member
 
Joined: Aug 2001
Posts: 386
Likes: 0
Default Re: ETs for Turbod SOHCs (eg6turbo)

13.823 @ 100.70
13.84 @ 101.69
Reply
Old Mar 10, 2003 | 05:39 PM
  #5  
ZEX Man's Avatar
Honda-Tech Member
 
Joined: Feb 2003
Posts: 1,134
Likes: 0
From: Memphis, TN
Default Re: ETs for Turbod SOHCs (Sleeping4drLS)

10.88 at 132.5mph in my 1989 CRX....418whp D16Z6......18 lbs of boost and 100hp shot of ZEX nitrous.

Later,

ZEX Man
Reply
Old Mar 10, 2003 | 07:04 PM
  #6  
fsp31's Avatar
Honda-Tech Member
 
Joined: Jun 2001
Posts: 1,516
Likes: 1
From: Okie in training, usa
Default Re: ETs for Turbod SOHCs (ZEX Man)

>>10.88 at 132.5mph in my 1989 CRX....418whp D16Z6......18 lbs of boost and 100hp shot of ZEX nitrous.<<

You certainly killed this thread for the rest of us.
Reply
Old Mar 10, 2003 | 07:26 PM
  #7  
norcalcrx's Avatar
Member
 
Joined: Nov 2001
Posts: 1,024
Likes: 0
From: Albion, Ca, usa
Default Re: ETs for Turbod SOHCs (ZEX Man)

QUOTE]10.88 at 132.5mph in my 1989 CRX....418whp D16Z6......18 lbs of boost and 100hp shot of ZEX nitrous./QUOTE]

Would you mind posting your setup for us?
Reply
Old Mar 10, 2003 | 07:48 PM
  #8  
SOHC_MShue's Avatar
Honda-Tech Member
 
Joined: Jun 2002
Posts: 11,440
Likes: 2
From: Richmond, Va, usa
Default Re: ETs for Turbod SOHCs (norcalcrx)

what times can you run on the stock boost on the greddy kit like around 5-6psi?
Reply
Old Mar 10, 2003 | 08:52 PM
  #9  
JFK78's Avatar
Honda-Tech Member
20 Year Member
 
Joined: Oct 2001
Posts: 1,158
Likes: 1
From: SpeedFactory, WA
Default Re: ETs for Turbod SOHCs (SOHC_MShue)

On 5 psi my '95 EX Coupe minus spare, jack, and passenger seat ran an average of 14.4's @ 96mph with low 2.2 60fts.

The best 5 psi run on stock tires was a 14.172 @ 96.94mph with a 2.171 60 ft.

On 8 psi it averaged 13.9's @ 98 mph with mid-high 2.2 60 fts.

In my lightweight hatch on stock tires and 5 psi I averaged 13.6's @ 103+mph with mid 2.1 60 fts.

The best 5 psi run on stock tires for the hatch was 13.34 @ 104.87mph with a 2.071 60 ft.

In my opinion the greddy kit in a heavy coupe makes for a really fun street car (quick spool around town is great) and it was pretty quick for the money.

If you really want to blow people away with the sohc and "toy" Greddy kit just put it in a light hatch.
Reply
Old Mar 10, 2003 | 09:12 PM
  #10  
BoostedED9's Avatar
Honda-Tech Member
20 Year Member
 
Joined: Aug 2001
Posts: 1,227
Likes: 1
From: Orlando, Florida, USA
Default Re: ETs for Turbod SOHCs (JFK78)

12.7@115 on 13psi, 20x6x14 slicks and a good ol 2.1 60ft.. yay
Reply
Old Mar 10, 2003 | 10:08 PM
  #11  
Drew Peacock's Avatar
Honda-Tech Member
 
Joined: Jul 2002
Posts: 4,361
Likes: 1
From: Where N/A is Not Applicable
Default Re: ETs for Turbod SOHCs (JFK78)

Hey JFK78 the legend returns I have been telling people about your times for awhile now and no one believes me. Long time no post? no you don't know me just a fan of what you have achieved
Reply
Old Mar 11, 2003 | 05:15 AM
  #12  
SOHC_MShue's Avatar
Honda-Tech Member
 
Joined: Jun 2002
Posts: 11,440
Likes: 2
From: Richmond, Va, usa
Default Re: ETs for Turbod SOHCs (turbozxi)

14.1 in a 5psi coupe is insane
Reply
Old Mar 11, 2003 | 05:20 AM
  #13  
ZEX Man's Avatar
Honda-Tech Member
 
Joined: Feb 2003
Posts: 1,134
Likes: 0
From: Memphis, TN
Default Re: ETs for Turbod SOHCs (norcalcrx)

1.6 SOHC V-TEC d-series
Darton sleeved block
Turbonetics 60-1 hi-fi compressor
TO4 exh. housing with a stage 5 wheel, .50 A/R
Turbonetics cast turbo manifold w/ custom t-4 adaptor plate welded on
Tial 46 mm wastegate
3" down pipe
100 hp ZEX nitrous
18-19 PSI boost
VP-C23 race fuel
FAST ecu w/ wide band
FAST data logger

Made 418 WHP at 6800 and 375 TQ. at 6400

I just put a direct port 120hp nitrous system with a 55hp second stage on the car this weekend.....shooting for low tens this year

Later,

ZEX Man
Reply
Old Mar 11, 2003 | 05:53 AM
  #14  
TurbodCX's Avatar
Honda-Tech Member
 
Joined: Jan 2002
Posts: 1,357
Likes: 0
From: Winchester, Va, us
Default Re: ETs for Turbod SOHCs (ZEX Man)

Alright, i have alot more in my setup!! i know now that my goal of 400whp can be done, and quiet easily.


The only difference is i am going to do it all on boost. i have a bigger turbo than you, but if i have to i can spray 100shot on it also..

Thanks Bro
Brian
Reply
Old Mar 11, 2003 | 05:56 AM
  #15  
autoEXturbo's Avatar
 
Joined: May 2002
Posts: 1,882
Likes: 1
From: FRANK THE TANK, USA
Default Re: ETs for Turbod SOHCs (Sleeping4drLS)

00 civic coupe.
stock sohc with greddy kit at 5.5psi and on an automatic tranny. The best i could get was a 14.9@95 on stock tires.
Reply
Old Mar 11, 2003 | 06:40 AM
  #16  
M.A.R.C.'s Avatar
Honda-Tech Member
 
Joined: Oct 2001
Posts: 6,024
Likes: 0
From: Pembroke Pines, Florida, United States
Default Re: ETs for Turbod SOHCs (autoEXturbo)

14.8 @ 93 on 6psi on a T3 60-trim with the biggest pos centerforce dual fuckry... err friction clutch. 60ft was 2.433 or something
Reply
Old Mar 11, 2003 | 06:52 AM
  #17  
SOHC_MShue's Avatar
Honda-Tech Member
 
Joined: Jun 2002
Posts: 11,440
Likes: 2
From: Richmond, Va, usa
Default Re: ETs for Turbod SOHCs (autoEXturbo)

00 civic coupe.
stock sohc with greddy kit at 5.5psi and on an automatic tranny. The best i could get was a 14.9@95 on stock tires.
wow thats really good
Reply
Old Mar 11, 2003 | 06:52 AM
  #18  
SOHC_MShue's Avatar
Honda-Tech Member
 
Joined: Jun 2002
Posts: 11,440
Likes: 2
From: Richmond, Va, usa
Default Re: ETs for Turbod SOHCs (SOHC_MShue)

any other stock boost times?
Reply
Old Mar 11, 2003 | 08:18 AM
  #19  
ZEX Man's Avatar
Honda-Tech Member
 
Joined: Feb 2003
Posts: 1,134
Likes: 0
From: Memphis, TN
Default Re: ETs for Turbod SOHCs (TurbodCX)

Bigger turbo?

"The only difference is i am going to do it all on boost. i have a bigger turbo than you, but if i have to i can spray 100shot on it also.."

When is a T3/TO4E considered larger than a T4/60-1?

Later,

ZEX Man
Reply
Old Mar 11, 2003 | 11:06 AM
  #20  
M.A.R.C.'s Avatar
Honda-Tech Member
 
Joined: Oct 2001
Posts: 6,024
Likes: 0
From: Pembroke Pines, Florida, United States
Default Re: ETs for Turbod SOHCs (ZEX Man)

i was wondering that too.
Reply
Old Mar 11, 2003 | 12:05 PM
  #21  
turbo83lude's Avatar
Junior Member
 
Joined: Sep 2002
Posts: 136
Likes: 0
Default Re: ETs for Turbod SOHCs (Sleeping4drLS)

i ran a best of 13.4 @ 104 MPH on a SOHC, with webers and a t-3 turbo at 11 PSI in my 83 prelude.
Reply
Old Mar 11, 2003 | 03:09 PM
  #22  
Sleeping4drLS's Avatar
Thread Starter
 
Joined: Aug 2002
Posts: 1,010
Likes: 0
From: South of Portland, OR
Default Re: ETs for Turbod SOHCs (turbo83lude)

some really good times
Reply
Old Mar 11, 2003 | 05:19 PM
  #23  
Licensed2Spool's Avatar
 
Joined: May 2002
Posts: 168
Likes: 0
From: Westerville, Ohio, US
Default Re: ETs for Turbod SOHCs (Sleeping4drLS)

I ran a 14.30 @ 94.8 mph with a 60ft. of 2.24. My setup was a D16Z6 w/ stock internals and automatic tranny. Greddy kit (15g turbo) @ 7psi. Had that setup for 6 months, then it blew a week before Xmas last year. Not gonna try another sohc setup; Im swaping in a B18B in a few weeks and using the Greddy sohc kit on it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
661rex89si
Forced Induction
5058
Aug 26, 2021 01:34 PM
typesguy
Forced Induction
16
Feb 26, 2004 01:58 PM
hybrid901
Forced Induction
7
Jul 15, 2002 02:29 PM
turbofasteg
Forced Induction
1
Apr 14, 2002 05:43 PM




All times are GMT -8. The time now is 01:27 PM.