To the EK/EM1/EJ8 owners with 3" exhausts
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2001
Location: GO LEAFS GO, NY, USA
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
To the EK/EM1/EJ8 owners with 3" exhausts
Im running a 3" thermal on my EM1 and ive had this problem for quite some time now.
my exhaust is hitting my rear LCA. the exhaust makes a bend, comes up and over the LCA and comes to the muffler. well, i dont know what the problem is, all my hangers are in tact and the exhaust hits the LCA in certain situations when my suspension flexes. anyone have this problem?
im thinking about just denting the exhaust in right at that point to give me some clearance, does anyone forsee any problems with this? i dont, its almost all the way at the end of my exhaust track and wont bottle neck it that much?
my exhaust is hitting my rear LCA. the exhaust makes a bend, comes up and over the LCA and comes to the muffler. well, i dont know what the problem is, all my hangers are in tact and the exhaust hits the LCA in certain situations when my suspension flexes. anyone have this problem?
im thinking about just denting the exhaust in right at that point to give me some clearance, does anyone forsee any problems with this? i dont, its almost all the way at the end of my exhaust track and wont bottle neck it that much?
#2
Trial User
Join Date: Jun 2004
Location: Seattle, WA
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Re: To the EK/EM1/EJ8 owners with 3" exhausts (Mr. Vapor)
Take it to a custom exhaust place. They can re hang it or replace that bend to make room and not restrict flow
#5
Honda-Tech Member
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Re: (igo4bmx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by igo4bmx »</TD></TR><TR><TD CLASS="quote">never had this problem...
running kteller piping.
like benj said, have them either rebend the hanger</TD></TR></TABLE>
Ditto.
running kteller piping.
like benj said, have them either rebend the hanger</TD></TR></TABLE>
Ditto.
Thread
Thread Starter
Forum
Replies
Last Post