Does EF-1 make a single slammer Cam, that would be good for turbo??
My friend has a ef-1 cam and its insane.. Wondering if anyone out there knows becuase there site is down..

 

I'm using their Z21 cams and I like them a lot. I think any of their x21 series cams are turbo friendly.

Sonny

 

How much was the cam,
do u Have any specs on the cam
duration?
and where can this be bought and do u have stock valves, springs, retainers??
thanx

 

http://www.m24x.com/ tell rocket that jared sent you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jared &raquo;</TD></TR><TR><TD CLASS="quote">http://www.m24x.com/ tell rocket that jared sent you</TD></TR></TABLE>

EF-1

 

Are all the cams regrinds??
or do u sell brand new EF1 cams?

someone had told me that they are all regrinds on the stock cam, just wondering.. if u could refresh me....

 

You can buy new ones or get regrinds on some of their offerings. I believe that their more radical stuff is made from brand new cores since using a stock core won't provide enough meat.

Sonny

 

Thanx for all the info..
Was wondering if ef1 would be the best for a turbo setup or is the zex cam really good? i have heard alot of mixed reviews on the zex and nothing on the ef1 single cam?? bump

 

I will be running there turbo cam profile on my new engine. I will hopefully have some before and after dyno graphics to post. Like someone said above....some of there profiles can be done as a regrind, but the more aggressive profiles are done on brand new blanks.

 

Def going to get the new blank, not a regrind..Which one is there turbo came(ef1 that is)
I want as much meat as possible.. LOL
Im hoping for 250-300 Whp on The single cam Motor..

Has anyone Read TURBOPANDA's Thread on the Toyota/B16 piston rod combo??
Any reviewes. cause i was going to go with that as far as my bottom end goes.. but wasnt 100% sure on that..

 

bump

 

morning bump