Eagle crank question??
#1
Honda-Tech Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: Murrieta, CA USA
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Eagle crank question??
My buddy is hookin me up with a set of new ls eagle rods and a knife edged eagle crank for really cheap. i was just wondering if anyone on here has any experience with these cranks and has any imput on them. I know there are plenty of people using stock cranks making lots of power, but i am getting the crank for way way way cheap and while we have the motor apart why not use it. I just want your imput, cuz the crank is really nice and my bro is fully building his bottom end sleeves, forged piston, rods, balance ect ect. thanx for your help
#2
Re: Eagle crank question?? (pettyboy69)
https://honda-tech.com/zerothread/2420587
i have no knowledge about eagle crank or anything but i read this thread the other day and it had a picture of an eagle crank and i thought i would post it in your thread, maybe it would give you some insight or an idea of who to talk to to get more info about the crank.
i have no knowledge about eagle crank or anything but i read this thread the other day and it had a picture of an eagle crank and i thought i would post it in your thread, maybe it would give you some insight or an idea of who to talk to to get more info about the crank.
#3
Honda-Tech Member
Join Date: May 2006
Location: hiding in the sticks in pa
Posts: 1,395
Likes: 0
Received 0 Likes
on
0 Posts
Re: Eagle crank question?? (pettyboy69)
you are probably gonna hear a lot of people on here saying that they are junk. i have one in my car and dont have any complaints yet. i made 541hp until i ran out of injector or it was going a lot higher.
you should consider that there have been a couple break but when you take into concideration how many have been made and are being used the percentage of broken ones should be really low
-jason
you should consider that there have been a couple break but when you take into concideration how many have been made and are being used the percentage of broken ones should be really low
-jason
Trending Topics
#8
Honda-Tech Member
iTrader: (11)
Re: Eagle crank question?? (pettyboy69)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quicksilver1689 »</TD></TR><TR><TD CLASS="quote">OEM or eagle you really cant go wrong either or.
big numbers have been made with both</TD></TR></TABLE>
just depends on who you talk to.
big numbers have been made with both</TD></TR></TABLE>
just depends on who you talk to.
Thread
Thread Starter
Forum
Replies
Last Post
cyrix12
All Motor / Naturally Aspirated
6
08-14-2005 07:02 PM