DC D16 T3 Manifold
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: San Jose, CA, USA
Posts: 3,492
Likes: 0
Received 0 Likes
on
0 Posts
DC D16 T3 Manifold
I remember seeing a stainless tubular manifold made by DC. Has anyone ever used one of these? I'm not sure if they still make them, but they looked pretty nice, except they weren't flanged for an external wastegate. Anyway, they looked like this:
I might be upgrading my DRAG genI soon, so I was looking for a quality manifold, tubular if possible. What's a good (non-log style)D series manifold in the $300-400 range or less?
I might be upgrading my DRAG genI soon, so I was looking for a quality manifold, tubular if possible. What's a good (non-log style)D series manifold in the $300-400 range or less?
#2
Honda-Tech Member
Re: DC D16 T3 Manifold (inspyral)
(wondering the exact same thing)
I am leaning towards just building my own at this point
I can get materials, but making it will just be a bitch!!!
I am leaning towards just building my own at this point
I can get materials, but making it will just be a bitch!!!
#7
Honda-Tech Member
Re: DC D16 T3 Manifold (inspyral)
Beleive it or not, I have the last turbo manifold made by DC * Unused that is*
I have it brand new sitting here looking pretty.
If I only had a digi cam
I have it brand new sitting here looking pretty.
If I only had a digi cam
Trending Topics
#10
Honda-Tech Member
Re: DC D16 T3 Manifold (inspyral)
The manifold itself retailed about $400.00 now a friend of mines changed his mind and gave me to me at a very special price.
#11
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: San Jose, CA, USA
Posts: 3,492
Likes: 0
Received 0 Likes
on
0 Posts
Re: DC D16 T3 Manifold (POLLO)
Cool. How's the tubing look? Pretty thick? Are you going to ad a w/g flange to it, or are you going to run internal?
#13
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: San Jose, CA, USA
Posts: 3,492
Likes: 0
Received 0 Likes
on
0 Posts
Re: DC D16 T3 Manifold (VaporTrail)
I just found this on PartsTrader:
http://thepartstrader.com/SingleAd.c...D=130&PCID=130
Looks like it's been rewelded. Are these prone to cracking at all?
http://thepartstrader.com/SingleAd.c...D=130&PCID=130
Looks like it's been rewelded. Are these prone to cracking at all?
#14
Honda-Tech Member
Re: DC D16 T3 Manifold (inspyral)
It has been rewelded to fit an external wastegate. If I was going to stay in the 8 to 10 psi range I would stick with internal but since im going to push upwards to 18 to 20 psi the chances are higher for somethin bad to happen with internal WG.
Thread
Thread Starter
Forum
Replies
Last Post
.RTErnie
Welding / Fabrication
26
09-02-2007 02:49 AM
Ri5e
Classifieds: Forced Induction
8
05-04-2003 09:33 PM