SnailedCivic

I recently put internals in my d16z6 in a 95 Civic Coupe. Pistons, Rods, and rings. After starting it up I get a very loud tapping noise coming out of the block and a misfire every few seconds. Then once it warms up it dies and won't really start again. If it does start, it dies out shortly after. When trying to drive the car you give it gas but it's like the spark disappears and motor just shuts off. I though maybe the distributor was going so i swapped that with a used one. It ran fine for half a day then the same crap starts again. HELP!!!!!!

13link EG

did you torue everything right on??? it might be the piston rod is my guess, because recently i blew a motor from an olsmobile and it made a loud *** hiting noise on the block then would stall at stop lights and whenever i stopped.