I finally figured out why the car was running like ****. Got her tuned for full boost (have to do part throttle tomorrow). Car runs like a freight train! Only problem Im having is some misfires in the higher RPMs. I just bought new plug wires. Im hoping the plug gap is just a bit to wide and its blowing out so I will tighten them up tomorrow.

Anyways for all those single cam guys wanting a next mod. Get the cam! Hopefully I will be going to dyno soon.

 

Have my 59300 and springs on the way. Cant wait to put it in along with boost.

 

i Have had it in my car for like 2 years, and never had problems, totally stock springs just the zex 59300 in a ported and milled head . Love it.

 

great cam but take a look at the 59500

platinum.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by drintegra &raquo;</TD></TR><TR><TD CLASS="quote">i Have had it in my car for like 2 years, and never had problems, totally stock springs just the zex 59300 in a ported and milled head . Love it.</TD></TR></TABLE>

me too

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by platinum00 &raquo;</TD></TR><TR><TD CLASS="quote">great cam but take a look at the 59500

platinum.</TD></TR></TABLE>

What's the deal with the 59500? Not on their site...

 

59500 will carry the power band higher up. i dont want to shift my motor that high so i went with the 59300.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rextec &raquo;</TD></TR><TR><TD CLASS="quote">59500 will carry the power band higher up. i dont want to shift my motor that high so i went with the 59300.</TD></TR></TABLE>

Yeah im the same way. My car is an auto-x car as well so i need good power down low. 59500 is the new "FI Cam" I think that Zex is releasing.