Custom Manifold Interest?
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Custom Manifold Interest?
Not sure if this goes in this forum, but how many people would be interested in Log manifolds for B and D series engine? I can do AC on the D series, not on Bseries(unless you send me an AC compressor for some money off the manifold )
Prices are going to range from $2-250, and Im only doing a small amount(5 or 10 for now) if the interest is high enough. TIG welding and CNC flanges...
Prices are going to range from $2-250, and Im only doing a small amount(5 or 10 for now) if the interest is high enough. TIG welding and CNC flanges...
#2
Member
Join Date: Apr 2002
Location: UCR/BayArea, CA, USA
Posts: 2,385
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom Manifold Interest? (Tinker219)
I'm interested. What kinda works have you done? It's going to be for a B16 in a 2nd gen crx w/o ac and HASport mounts for the future but a D16 manifold for a 2nd gen crx for the present.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: Custom Manifold Interest? (swrdply400mrelay)
The material is Schedule 40 piping...its almost a quarter inch thick. They will not crack.
The flanges are CNC machined, and welds will be TIG.
Everyone hit me up via Email or IM for pics because this is not in the right forum, I just wanted to see what kind of interest there was out there. Thank you.
-Cody
The flanges are CNC machined, and welds will be TIG.
Everyone hit me up via Email or IM for pics because this is not in the right forum, I just wanted to see what kind of interest there was out there. Thank you.
-Cody
#10
Member
Join Date: Feb 2002
Location: interlochen, mi, usa
Posts: 4,005
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom Manifold Interest? (swrdply400mrelay)
i have seen a few of codys manifolds, i would have to say that it is a great deal at $250. email him for some pics, you will not be let down!
#11
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: Custom Manifold Interest? (revhardracing)
Thanx Rob,
No you wont be dissappointed. If you are, talk with me and we will figure out how to make you happy...
As for tubular Mani's yes I can make them. I want to get $350 for one of these, because they are quite a bit trickier...Like I said Im still a few weeks off from being ready to produce theses with the TIG welder and CNC flanges...
No you wont be dissappointed. If you are, talk with me and we will figure out how to make you happy...
As for tubular Mani's yes I can make them. I want to get $350 for one of these, because they are quite a bit trickier...Like I said Im still a few weeks off from being ready to produce theses with the TIG welder and CNC flanges...
#12
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: Custom Manifold Interest? (Tinker219)
Something similar to this one will be $3-400.
These will be $250...
bad pics, but once again, the flanges will be CNC'd. If you have anything other than a T3, I will need the turbo in order to build the manifold...the shipping cost will of course be deducted from the total price...
Edit: T3/t4s, as well as straight T4s are ok.
Edit#2: I guess we-todd-did-racing is down....pics will come back up when they are back up...
[Modified by Tinker219, 11:34 AM 2/23/2003]
These will be $250...
bad pics, but once again, the flanges will be CNC'd. If you have anything other than a T3, I will need the turbo in order to build the manifold...the shipping cost will of course be deducted from the total price...
Edit: T3/t4s, as well as straight T4s are ok.
Edit#2: I guess we-todd-did-racing is down....pics will come back up when they are back up...
[Modified by Tinker219, 11:34 AM 2/23/2003]
#14
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: Custom Manifold Interest? (Tinker219)
anybody know wtf is going on with WTDR? I cant upload anything, nor post any new pics...Im gettin kinda pissed
If you want to see some pics, IM MikeMAN...he might still have some left somewhere...I made one for him...
If you want to see some pics, IM MikeMAN...he might still have some left somewhere...I made one for him...
#16
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: Custom Manifold Interest? (blu_si)
I just get halfway through uploadign, and the Error 404 bullshit pops up. Maybe its cuz on on the phone line right now? I will try again when Im at home on the cable modem
#20
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: Custom Manifold Interest? (MikeMAN)
Thanx for the pics Mike.
The manifold pictured is the basic design. However, I am now using CNC flanges, and a TIG welder for cleaner/stronger welds, and I will have pics of these when they are ready....
if you have any other turbo besides a T3 or T4, I will need the flange gasket to make a flange(or send me the flange and I will knock the price down).
The manifold pictured is the basic design. However, I am now using CNC flanges, and a TIG welder for cleaner/stronger welds, and I will have pics of these when they are ready....
if you have any other turbo besides a T3 or T4, I will need the flange gasket to make a flange(or send me the flange and I will knock the price down).
#21
Re: Custom Manifold Interest? (Tinker219)
why would you need just the a/c for bseries? dont you need to actually test fit in a car? can i provide dimensions or something for you? pics, flanges, whatever.
i need a log for my 90integra, but with 14b with the stock downpipe and charge pipe thingy
i need a log for my 90integra, but with 14b with the stock downpipe and charge pipe thingy
#23
Honda-Tech Member
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom Manifold Interest? (Tinker219)
do you have pics of the a/c compatible D-series mani? also a pic of one mounted in a d-series bay with a/c?
#25
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: (00si5)
holy **** it is...I still look at MikeMAN's mani up above, and shake my head in wonder...How I ever managed to do that with a stick welder. TIG rocks!