Critique my Autocross Prelude turbo setup
06-30-2009, 07:57 PM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: McKinleyville, CA, USA
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Critique my Autocross Prelude turbo setup
So I've decided I'm going to put together a little turbo setup for the 'Lude (97 base model) to both make my DD a bit more fun and to give me a bit of an edge in Autox. I'm already in SM so classing isn't an issue for me
Anyways, here's my plan:
T28 from an RB25DET (ceramic compressor wheel, ball bearing, water cooled, and internally wastegated)
Spoolin' Performance log manifold and 2.5" downpipe
Tial 50mm blow-off valve
SSautochrome intercooler + piping (I've talked to a couplet guys running this stuff and it fits nicely)
I'm not sure about the injectors, I was thinking of getting some DSM 450's but I'm still on the fence on that one
I'm shooting for ~250whp with a nice, low-to-midrange powerband and I think a T28 should get that done nicely
Any and all opinions/advice is welcome!
Anyways, here's my plan:
T28 from an RB25DET (ceramic compressor wheel, ball bearing, water cooled, and internally wastegated)
Spoolin' Performance log manifold and 2.5" downpipe
Tial 50mm blow-off valve
SSautochrome intercooler + piping (I've talked to a couplet guys running this stuff and it fits nicely)
I'm not sure about the injectors, I was thinking of getting some DSM 450's but I'm still on the fence on that one
I'm shooting for ~250whp with a nice, low-to-midrange powerband and I think a T28 should get that done nicely
Any and all opinions/advice is welcome!
Thread
Thread Starter
Forum
Replies
Last Post
