could this be causing my turbo setup to not hold boost and spike up to 10...
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: vallejo, ca, usa
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
could this be causing my turbo setup to not hold boost and spike up to 10...
my boost goes up to 10 psi and then goes back down to 5-6 psi
its a greddy 18g kit on a GSR
its a greddy 18g kit on a GSR
#4
Honda-Tech Member
Join Date: Feb 2003
Location: Phoenix Arizona
Posts: 1,740
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TurboPieces5280)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboPieces5280 »</TD></TR><TR><TD CLASS="quote">no</TD></TR></TABLE>
^^
^^
#6
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: vallejo, ca, usa
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boostedcivicsir)
so can i use a wasta gate off anothe turbo? custom fab it to fit my greddy turbo?
so that is the problem? thanks guys?
so that is the problem? thanks guys?
Trending Topics
#10
Honda-Tech Member
Join Date: Feb 2004
Location: Hello Friend, illinois
Posts: 4,670
Likes: 0
Received 0 Likes
on
0 Posts
plug up hole.. get new manifold and enter the world of externally gated setups....
or if the kit is somewhat new... call greddy and bitch them out for product failure and get a new wastegate...... lolz
or if the kit is somewhat new... call greddy and bitch them out for product failure and get a new wastegate...... lolz
Thread
Thread Starter
Forum
Replies
Last Post
rjc898
Forced Induction
7
05-16-2005 09:03 AM
TurboB18C1
Forced Induction
2
07-13-2002 07:19 PM