Which clutch for roughly 350-400whp?
#1
Member
Thread Starter
Join Date: Apr 2001
Location: NYC, NY/NJ
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
Which clutch for roughly 350-400whp?
I'm currently running a cm stage 5 with a fully built ls/vtec 2.0l. Running a t4/60-1. The old set-up made 450whp at about 18-20psi on race gas but I'm going strictly pump gas 94octane now. I'm expecting around 350whp at a little over 15psi.
The stage 5 I'm running now literally peels out in 1st gear at 2000rpm. I have to ease out of a traffic light even on the street at about 3500rpm for this not to happen. Looking for something a little more streetable but still with plenty of bite. The stiffness of the pedal also does matter but I realize it won't be anywhere close to stock unless I run a cm stage 3.
Any input?
The stage 5 I'm running now literally peels out in 1st gear at 2000rpm. I have to ease out of a traffic light even on the street at about 3500rpm for this not to happen. Looking for something a little more streetable but still with plenty of bite. The stiffness of the pedal also does matter but I realize it won't be anywhere close to stock unless I run a cm stage 3.
Any input?
#2
Re: Which clutch for roughly 350-400whp? (bgod)
I am using the ACT Extreme Clutch with 6 Puck on a daily bases. I am not "gracefull" on the Street, but I know I will Kick *** on the Track, so I can live with it.
Thread
Thread Starter
Forum
Replies
Last Post