Cam Issue
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2005
Location: From NJ to Ga
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Cam Issue
I has a gsr turbo'd motor.. and I was thinking about Blox B cams, but I have the skunk 2 pro series valve springs and titanium retainers. The guy that is going to tune my car, said that I would be better off sticking with the gsr cams...
My setup is:
GSR Block with ls crank, ls eagle rods, and ls forged pistons 85mm..
Ramhorn manifold
t3/t4oe ar.63
I was wanting the most out of this setup.. But i don't see a reason why my friend would say not to get the cams..
And also is the skunk 2 pro series valvetrain too harsh for stock gsr cams or eithier blox b's or even skunk 2 tuner 2's cams..
Thanks in advance.
My setup is:
GSR Block with ls crank, ls eagle rods, and ls forged pistons 85mm..
Ramhorn manifold
t3/t4oe ar.63
I was wanting the most out of this setup.. But i don't see a reason why my friend would say not to get the cams..
And also is the skunk 2 pro series valvetrain too harsh for stock gsr cams or eithier blox b's or even skunk 2 tuner 2's cams..
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
team_ibR
Forced Induction
11
05-11-2010 05:26 PM
komat
All Motor / Naturally Aspirated
29
06-30-2009 06:47 AM