built d16z6 turbo won't start.
#1
New User
Thread Starter
Join Date: Nov 2007
Location: ogden, utah, north america
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
built d16z6 turbo won't start.
I have a built d16z6, the bottom end was bored over .040 has eagle rods and cp pistons new bearings,450cc injectors out of dsm, resistor box. the head is stock. i have t3 turbo on there. But my problem is when i turn it over it will barely start while giving it gas but it won't stay running by its self. its getting fuel and spark but it won't stay running. i pulled the plugs and they were covered in fuel and had a little bit of oil. Me and my buddy think there might be some ignition timing issues but aren't for sure. Ive checked all sensors, gone over everything not leaking oil or coolant. I don't know if i'm to rich and it just floods it out or what any help or advice is much appreciated. thanks.
Last edited by maximus1845; 01-07-2009 at 11:49 AM.
Thread
Thread Starter
Forum
Replies
Last Post
aaronpark
Honda Civic / Del Sol (1992 - 2000)
5
09-25-2009 04:21 PM
slammed_coupe
Honda Civic / Del Sol (1992 - 2000)
6
02-24-2005 05:43 AM