B_1_8_hatch

what is the average or best 60' time people are getting when using the falken azenis?

HybridKOOP

I don't have them but I guarantee you're going to hear a ton of 2.1X's

B_1_8_hatch

yeah...thats my best. i guess its time i get some slicks

rjardy

are these good tires? Im in the market for new tires and I dont know what to look for, the car will see some track duty. Sorry to hijack

Rob

ScottEK

They're great tires for autocross, I've been in a few cars where it was beyond my belief that the Azenis were not breaking loose around corners. For drag however they are good till a certain point. I'm guessing that point is somewhere around 240HP, I'm guessing that I'm making around 250HP right now and all they do is spin till about the middle of third gear.

VTC_CiViC

I've hear of people cutting 2.0's, but I just can't fathom how the hell you launch to get so low a 60' on those tires.

Then again I can't cut lower than a 2.3 on DR's

PM-Performance

i only got to race on mine once, i hit 2.0 on mine .
i let the pressure down to like 15-17 psi from what i remeber, gave em a quick scrub to warm them up and i mean like 3-4 rotations. thne hit the 2 step at 5k and they hooked like a charm on close to 400whp. I was deff suprised.

quikB18B

Ill be testing them out this weekend Im also taking the nitto's to do a comparison, but i think both will fair similar 60 ft's.

Foozball26

they suck with 275 ft lbs of torque

93LSivic

Best I pulled on my Azenis was a 2.002 60".
Ran about 18-20 psi in them.

They are also good for winning burnout contests! Just entered and won the first one ever for me, woohoo

TRE_

I hit a 2.3 60ft with them at like 32 psi.

Tofurky

2.42 with them at like 35 psi

Ricey McRicerton

Good tires, nosiy as crap though. They also don't last long enough to daily drive them (IMHO) I only got like 15,000 out of mine.

Muckman

iTrader: (2)

Friend of mine with a JDM B18C5 + JDM ITR tranny Integra has pulled a 2.082 60' on Azenis.
Best time of 13.377 @ 104.95
stock longblock, light fly, crankpulley, intake, exhaust

Evil EG

T3T495GSR off of here pulled a 1.9 60ft on Azeins. At Route 66 with ~29psi in the tire. On a stock gsr clutch.

ihaterice

on the azenis in my all motor vx i pulled 2.12 as a best - put a set of bfgoodrich drag radials on it and pulled 1.9s right out of the box, if you are looking for something worth your while to purchase and drag race a bit, bfgoodrich g force drag radials are great

james

quik sol

i love my yokohoma avs's i have cought 2.0's with em