B16A Highway rat...Methanol w/o IC
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2007
Location: SC, USA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
B16A Highway rat...Methanol w/o IC
I'm planning on throwing a borg warner turbo in my crx very soon, the turbo is off a john deer tracker so the spool time is going to be hell, but I'm curious about if its really necessary to run a intercooler on a turbo setup that will only be in boost every now and again. Boost should peak around 5700.
I can run a 55/45 meth/water injection if the intake temps get too high, but will it be safe to run it in a non sprayed environment such as this?
I can run a 55/45 meth/water injection if the intake temps get too high, but will it be safe to run it in a non sprayed environment such as this?
#3
Honda-Tech Member
Join Date: Nov 2003
Location: GTA Ontario.
Posts: 3,540
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16A Highway rat...Methanol w/o IC (ExVtec)
you can do it.. just use 2 big nozzles, one about 12" pre throttle body and another pre turbo. Its really not the best way.
Thread
Thread Starter
Forum
Replies
Last Post
postman
Forced Induction
8
04-24-2008 02:41 PM