Assitance Request :Identification of Precision Turbo SC50
#1
Assitance Request :Identification of Precision Turbo SC50
got this turbo for a good deal in a kit 360 thrust bearing new seals etc please tell me what turbo it is so I can research if it can meet my goals pics below , I figures it's precision sold to me as a garret 60 trim
#2
Moderator
iTrader: (14)
Re: Name that turbo
Check The FAQs. It has that answer for you.
Make sure you get Compressor / Turbine wheel measurements in millimeters, which will require housing removal.
Find any data plates, tags or inscriptions on the inside of the compressor outlet and turbine housing to help.
Understand how turbochargers are measured. Read all of this. Also in the FAQs
Turbo Tech 101 - Tech-Knowledge - Import Tuner Magazine
It's the 1st listing on the FAQs.
https://honda-tech.com/forums/forced.../#post11973386
Make sure you get Compressor / Turbine wheel measurements in millimeters, which will require housing removal.
Find any data plates, tags or inscriptions on the inside of the compressor outlet and turbine housing to help.
Understand how turbochargers are measured. Read all of this. Also in the FAQs
Turbo Tech 101 - Tech-Knowledge - Import Tuner Magazine
It's the 1st listing on the FAQs.
https://honda-tech.com/forums/forced.../#post11973386
#3
Re: Name that turbo
Check The FAQs. It has that answer for you.
Make sure you get Compressor / Turbine wheel measurements in millimeters, which will require housing removal.
Find any data plates, tags or inscriptions on the inside of the compressor outlet and turbine housing to help.
Understand how turbochargers are measured. Read all of this. Also in the FAQs
Turbo Tech 101 - Tech-Knowledge - Import Tuner Magazine
It's the 1st listing on the FAQs.
https://honda-tech.com/forums/forced.../#post11973386
Make sure you get Compressor / Turbine wheel measurements in millimeters, which will require housing removal.
Find any data plates, tags or inscriptions on the inside of the compressor outlet and turbine housing to help.
Understand how turbochargers are measured. Read all of this. Also in the FAQs
Turbo Tech 101 - Tech-Knowledge - Import Tuner Magazine
It's the 1st listing on the FAQs.
https://honda-tech.com/forums/forced.../#post11973386
#5
Honda-Tech Member
re: Assitance Request :Identification of Precision Turbo SC50
Be a good street turbo at low boost but yes too small... sc61 is where the life starts for the H and bigger power goals.
Thread
Thread Starter
Forum
Replies
Last Post
theEGkid
Forced Induction
7
09-22-2005 10:44 AM