Anyone's Autometer A/F Gauge break?
08-30-2001, 07:43 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: Phoenix, AZ, USA
Posts: 3,483
Likes: 0
Received 0 Likes
on
0 Posts
Anyone's Autometer A/F Gauge break?
As of two days ago..my A/F Guage only cycles between lean and the first stoich LED. When I stop and the car is idling...ALL the LEDs light up! WTF?
Could it be Im running that lean? I checked the plugs and they all look fine.
Im going to test the O2 sensors with a multimeter and see if the voltage agrees with the A/F Gauge
Could it be Im running that lean? I checked the plugs and they all look fine.
Im going to test the O2 sensors with a multimeter and see if the voltage agrees with the A/F Gauge
08-30-2001, 01:40 PM
#2
Honda-Tech Member
Re: Anyone's Autometer A/F Gauge break? (HX_Guy)
the AutoMeter a/f guage is a very simple beast. You can make one with $5 and a trip to radioshack. There is no moving parts...i wouldnt see how it could *break* unless it was smashed.
liam
liam
08-30-2001, 02:15 PM
#3
New User
Join Date: Feb 2001
Location: VIRGINIA
Posts: 5,141
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone's Autometer A/F Gauge break? (liam821)
i saw a properly hooked up autometer gauge today read "normal" at wide open throttle. the problem is, it was on a car that was on a dyno with an a/f meter and it was soooo lean, it was off the charts. luckily he had a built motor. even with that, i was surprised to see it live through one pull.......those autometer a/f gauges suck. 
Thread
Thread Starter
Forum
Replies
Last Post
Lei Siew Long
Tech / Misc
2
11-16-2001 01:48 PM
Lei Siew Long
Forced Induction
5
07-03-2001 01:14 PM