Anyone wana check out my basemap? PLEASE!!
#1
Guest
Posts: n/a
Anyone wana check out my basemap? PLEASE!!
Alright guys- Im making a basemap for a friends car, that were going to tune in AF ratios- I was thinking about starting off with something like this
http://www.xenocron.com/bins/i...eries&
and tuning from there- If anyone could give me some ideas, modify it up a little for me that would be great-
Thanks
http://www.xenocron.com/bins/i...eries&
and tuning from there- If anyone could give me some ideas, modify it up a little for me that would be great-
Thanks
#3
iTrader: (2)
Re: Anyone wana check out my basemap? PLEASE!! (vestalfootball72)
Start fresh. I could tell you that I would never run a car on that fuel/timing map.
If you are not capable of starting on your own, you should consider paying some one that has a lot of experience to tune the vehicle (tuner).
If you are not capable of starting on your own, you should consider paying some one that has a lot of experience to tune the vehicle (tuner).
#4
iTrader: (2)
Re: Anyone wana check out my basemap? PLEASE!! (mtber)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mtber »</TD></TR><TR><TD CLASS="quote">Start fresh. I could tell you that I would never run a car on that fuel/timing map.
If you are not capable of starting on your own, you should consider paying some one that has a lot of experience to tune the vehicle (tuner). </TD></TR></TABLE>
Agreed. I would start off with a stock map sensor basemap if this is your first try at making a basemap. You will have a lot less hassle with it.
If you are not capable of starting on your own, you should consider paying some one that has a lot of experience to tune the vehicle (tuner). </TD></TR></TABLE>
Agreed. I would start off with a stock map sensor basemap if this is your first try at making a basemap. You will have a lot less hassle with it.
Thread
Thread Starter
Forum
Replies
Last Post
Kwuaymaikrup
Forced Induction
24
02-27-2004 11:41 AM