anyone heard of this
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Woodbridge, va, usa
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
anyone heard of this
working on my buddy's car today, FYI jdmb16 with 80 shot, anyway wouldn't start replaced the starter still wouldn't start, starter was turning but not turning the motor, so looked at the flywheel, it was spinning as well but turns out that the ring gear was spinning not the flywheel, it's only two weeks old, never seen it happen before, guess that should teach people not to buy napa parts, oh well back to drawing board just figured i'd share
#2
Re: anyone heard of this (dc r-spec)
never heard of that! it's kinda funny when you aren't the one pulling the tranny again. Was it resurfaced at Napa? If it's just a steel flywheel just have napa tack the gear in 4 or 5 spots for FREE.
#3
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Woodbridge, va, usa
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Re: anyone heard of this (Bailhatch)
yeah it's a remanufactured napa flywheel, we are going to do that but it's still a pain in the *** when you have to drop a tranny on jack stands with no cheerypicker!!! sucks ***, guess just need a lot of beer
#4
Re: anyone heard of this (dc r-spec)
ya i don't really enjoy doing clutchs myself. I just like to hammer through them as fast as I can. Me and my buddy did an integra in about 2.5hrs on jack stands. That seems pretty good. any faster and you start making mistakes. might help
Thread
Thread Starter
Forum
Replies
Last Post