opened the coolant drain on the block and this is what came out... head was off the replace the head gasket.







Kinda looks like mud or somthing... any ideas ?

 

EWWWW That crap cameout when you opened the water plug???

 

Thats wierd. I've seen some bugs in some JDM motors but I don't know...

Any machine work done to the motor in the past?

 

built ... sleaved , pistons, rods... kept blowing head gaskets but was not over heating so i dont think it was blocked up then again its like 20 out so i dont know if that was keeping it from overheating.

 

Does it feel or look like metal shavings? Looks like it wasn't cleaned after the machine work was done.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxmatt &raquo;</TD></TR><TR><TD CLASS="quote">Does it feel or look like metal shavings? Looks like it wasn't cleaned after the machine work was done.</TD></TR></TABLE>

no theres no metal in it .... there is hair in it looks like poop

 

Looks like poop. Grab a magnet and see if any of it clings to it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RiceRocket12s &raquo;</TD></TR><TR><TD CLASS="quote">

no theres no metal in it .... there is hair in it looks like poop </TD></TR></TABLE>

Your poop has hair in it?? Anyway I have never seen anything like that come out of a block.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TeStUdO &raquo;</TD></TR><TR><TD CLASS="quote">

Your poop has hair in it?? </TD></TR></TABLE>

It's animal **** cheif.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by @lbert &raquo;</TD></TR><TR><TD CLASS="quote">

It's animal **** cheif.</TD></TR></TABLE> lol yea thats what i was thinking... could that be whats maken the head gasket keep blowing ?

 

did it come out fast or slow

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by @lbert &raquo;</TD></TR><TR><TD CLASS="quote">

It's animal **** cheif.</TD></TR></TABLE>

So an animal somehow climbed inside his radiator or somewhere in the cooling system and **** that much before it died?? I doubt it.

 

my thermostat on my d16a1 in my 1g crx wasnt workin, i pulled the thermostat cover and theres two little bugs in there. about an inch long each weirdest thing ive seen.


just a thought maybe, but maybe someone used some of that radiator leak sealnt stuff that supposedly eats your head gasket away and whatever was left sat in your radiator and than got into system and maybe caused your gaskets to blow.....

Sean

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TeStUdO &raquo;</TD></TR><TR><TD CLASS="quote">

So an animal somehow climbed inside his radiator or somewhere in the cooling system and **** that much before it died?? I doubt it.</TD></TR></TABLE>

Those ******* squirels are shady man they are out to get him I think.

 

Looks like Bars leak which some people use in sleeved motors to make sure they don't leak or in their radiators.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ralphie14 &raquo;</TD></TR><TR><TD CLASS="quote">

Those ******* squirels are shady man they are out to get him I think.</TD></TR></TABLE>

my friend had a chipmunk climb inside the bell housing on his motor(trans am), when we went to crank it... well you get the picture. it made a really funny squeaking/crunching sound. we tried to turn it over like 8 times. poor chipmunk, lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost &raquo;</TD></TR><TR><TD CLASS="quote">my friend had a chipmunk climb inside the bell housing on his motor(trans am), when we went to crank it... well you get the picture. it made a really funny squeaking/crunching sound. we tried to turn it over like 8 times. poor chipmunk, lol</TD></TR></TABLE>

 

it was kind of amusing to hear

 

WTF is that..

 

it looks like that **** you put in your coolant to plug the holes in your radiator

 

looka like poop

 

looks like crap out of a sink drain pipe....

 

well, its my motor, and this **** has got me stumped. Someone has to know something. oh, here are some pics of it right when it came out, before it dried up and looked like poop:

 

does it smell like poop?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rhd &raquo;</TD></TR><TR><TD CLASS="quote">does it smell like poop?</TD></TR></TABLE>

nope, no odor at all