blinger

size is 33" from inlet to outlet openings. the main body is 25" x 7" x 2.5"

im looking for some mounting tips or pics of mounts on an EF. I searched but couldnt find any pics, they were all red x's.

CRXDrew

you will probably need to notch the bumper support.... atleast this makes mounting MUCH easier.

blinger

any pics of the notch? i figured i'd prob have to notch it, but im lookin of setups or somethin that i can go from

Redline130

Here's a couple of my CRX:

njn63

Redline130, what are the dimensions on that intercooler?

blinger

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redline130 &raquo;</TD></TR><TR><TD CLASS="quote">Here's a couple of my CRX:





</TD></TR></TABLE>

nice!!

someone told me that I was supposed to mount it to the bumper support in between the bumper and the support? or do the pictures show the correct way?

Redline130

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by njn63 &raquo;</TD></TR><TR><TD CLASS="quote">Redline130, what are the dimensions on that intercooler?</TD></TR></TABLE>

31x8x3.5 I believe. It's the medium sized Precision "600hp" intercooler.

There is just no room to mount an intercooler of this size while still keeping the bumper support, unless you hack up the support. It was just easier for me to take the support out. Plus it's a track only car too.

blinger

wound it be better to mount it how it is in the pics or mount it to the bumper support?

njn63

it depends on your intercooler. It looks like his has those tabs cast in so it'd be a good idea to use them but there really is no wrong way as long as it's sturdy.

JamesS

Here's mine. I got the idea from a setup posted on HT a few years ago; can't remember who's actually. If you know who, please give props.