anatomy of a deltagate mark II wastegate
#1
Junior Member
Thread Starter
Join Date: Dec 2001
Location: calgary, alberta, canada
Posts: 883
Likes: 0
Received 0 Likes
on
0 Posts
anatomy of a deltagate mark II wastegate
Has anyone ever taken one of these apart? I have a unit that was given to me and it was disassembled but I know the parts that need to be replaced. I believe it is the valve and the valvestem. The valvestem was broken off and the valve has a part of the threaded sleeve stuck in it. Can anyone verify these parts and does anyone know where to contact turbonetics for replacement parts and what to ask for when talking to them? Thanks.
Or better yet, does anyone have the necessary parts that I need?
Or better yet, does anyone have the necessary parts that I need?
#4
Junior Member
Thread Starter
Join Date: Dec 2001
Location: calgary, alberta, canada
Posts: 883
Likes: 0
Received 0 Likes
on
0 Posts
Re: anatomy of a deltagate mark II wastegate (boostedel)
hhhaahhahaha, sorry man, can't help it!!! I got this thing for free man, with two springs! I just need the valve and the screw on valve stem (if that's what they're called!) I figure even if they cost me around 50 bux, that's 50 bux I spent on an external wastegate! haha Hey wait a minute, your car isn't running right now, thus your wastegate isn't being used! Hmmm......ah, what am I talking about, you couldn't even spare a freaking oil filiter!!! hahahahah
#7
Junior Member
Thread Starter
Join Date: Dec 2001
Location: calgary, alberta, canada
Posts: 883
Likes: 0
Received 0 Likes
on
0 Posts
Re: anatomy of a deltagate mark II wastegate (boostedel)
hahaha, thanks man! haha, I have the green one and the black one. Man, that black one is hard to compress!!!! But still, does anyone know what I'm talking about with regards to my initial question?
Trending Topics
#8
Honda-Tech Member
Join Date: Jun 2000
Location: Bay Area, CA, USA
Posts: 750
Likes: 0
Received 0 Likes
on
0 Posts
Re: anatomy of a deltagate mark II wastegate (ludelvr)
They make different versions or something. I had two non-working deltagates and used parts from each to make a working one, but I noticed that the valve parts were not the same. I can sell you my working deltagate to use for parts, the side port has been jbwelded on, so I probably wouldn't get much for it anyway.
Brad
Brad
#10
Junior Member
Thread Starter
Join Date: Dec 2001
Location: calgary, alberta, canada
Posts: 883
Likes: 0
Received 0 Likes
on
0 Posts
Re: anatomy of a deltagate mark II wastegate (boostedel)
is yours taken apart? I'm not so sure if I give it to you that I'll get it back! hahahahahha anyway, I just gave corey my valve stem and valve to see if he can drill out the broken piece of the valve stem out of the valve itself. He's also gonna try and contact turbonetics and ask about those parts for me cuz he's gotta call them too, but yah, once I get it all back, I'll swing buy and drop it off. Oh yah, while you're reading this, can I borrow one of your air filters for a bit? I'm going back to NA and I need an air filter until nick gives me his AEM intake, also, who makes cheap ubends 2.5"? I need like 5 or 6 and mopac wants like 23 dollars for one! Anyway, let me know man.
#11
Re: anatomy of a deltagate mark II wastegate (ludelvr)
sure man you can borrow and intake. Well I have the filter's kicking around at home just get a pipe from someone. **** ubends went up in price from the last time I bought them. I can check if I can get it cheaper from Mopac at my cost but it won't be much cheaper. Get your lazy *** out of the house and bring the damn wastegate. I need parts.
Thread
Thread Starter
Forum
Replies
Last Post
Ef Si
Forced Induction
40
10-06-2011 03:01 PM
Ef Si
Classifieds: Forced Induction
7
08-26-2011 03:58 PM
hxtasy
Forced Induction
3
06-29-2007 11:58 AM