Are all T3 turbo Flanges the same.
08-04-2004, 04:07 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Texas
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Are all T3 turbo Flanges the same.
Are they all the same size? I ordered a T3 turbo flange(5 bolt) for my turbo.I got it yesterday but it is too small to fit my turbo..I was wondering if the 5 bolt T3 flanges are different OR if my turbo,for being a T3 Super 60 has a bigger flange?
Pics are worth more than a thousand words.
Turbo w/o the flange
Turbo WITH the flange
The center opening lines up perfectly with the turbo as well as the 2 bottom screw holes but everything else doesnt.
Pics are worth more than a thousand words.
Turbo w/o the flange
Turbo WITH the flange
The center opening lines up perfectly with the turbo as well as the 2 bottom screw holes but everything else doesnt.
08-04-2004, 04:26 AM
#2
Member
Join Date: Feb 2002
Location: poop, fl, us
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
Re: Are all T3 turbo Flanges the same. (fjt)
no,they are not all the same,there are 2 different patterns that i know of,a mitsu/chrysler and a garret one.there could be more.
08-04-2004, 04:40 AM
#3
Honda-Tech Member
oh crap i thought they were all the same..
yo man
i have three flanges i bought on ebay... measure the holes and i can see if mine fits and i will sell it to you for cheap
yo man
i have three flanges i bought on ebay... measure the holes and i can see if mine fits and i will sell it to you for cheap
08-04-2004, 06:25 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Texas
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Re: (igo4bmx)
I let you know later cause o prefer this Flange to be Exchanged for a correct one in the place i bought it from..I dont want to spend more $$.
Trending Topics
08-11-2004, 11:04 AM
#10
Honda-Tech Member
Re: Are all T3 turbo Flanges the same. (RenoRacing)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RenoRacing »</TD></TR><TR><TD CLASS="quote"> Ford is the traditional turbonetics style 5 bolt. Mitsubishi is the weird 14b diamond shaped one with two holes usually. and mercedes is similar to the traditional turbonetics except enlarged by about 3/4" all around and between every bolt spacing.
</TD></TR></TABLE>
good info~
</TD></TR></TABLE>good info~
08-16-2004, 06:33 PM
#12
Honda-Tech Member
Join Date: May 2003
Location: Portland, Oregon
Posts: 5,735
Likes: 0
Received 0 Likes
on
0 Posts
Re: (igo4bmx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by igo4bmx »</TD></TR><TR><TD CLASS="quote">where can we buy these?</TD></TR></TABLE>
Good question! I just about bought a flange without knowing there are more than one size...
I am using a Garrett T3 60 trim that I bought from down2turbo off eBay, I'm assuming I also will need a Mercedes style flange...
Good question! I just about bought a flange without knowing there are more than one size...
I am using a Garrett T3 60 trim that I bought from down2turbo off eBay, I'm assuming I also will need a Mercedes style flange...
08-16-2004, 06:47 PM
#13
Honda-Tech Member
Re: (EJ1 wilcox)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ1 wilcox »</TD></TR><TR><TD CLASS="quote">Good question! I just about bought a flange without knowing there are more than one size...
I am using a Garrett T3 60 trim that I bought from down2turbo off eBay, I'm assuming I also will need a Mercedes style flange...</TD></TR></TABLE>
i bought the same exact turbo from him....
I am using a Garrett T3 60 trim that I bought from down2turbo off eBay, I'm assuming I also will need a Mercedes style flange...</TD></TR></TABLE>
i bought the same exact turbo from him....
08-16-2004, 08:33 PM
#15
iTrader: (1)
Join Date: Nov 2001
Location: 43257 Osgood Rd. Fremont, CA 94539
Posts: 45,428
Likes: 0
Received 0 Likes
on
0 Posts
Re: (igo4bmx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by igo4bmx »</TD></TR><TR><TD CLASS="quote">
i bought the same exact turbo from him....</TD></TR></TABLE>
im giong to be gettin a few made. if you guys are interested itll be 35$ shipped. cnc cut
i bought the same exact turbo from him....</TD></TR></TABLE>
im giong to be gettin a few made. if you guys are interested itll be 35$ shipped. cnc cut
08-16-2004, 08:44 PM
#16
Honda-Tech Member
Re: (project dc2)
well ftj and the other guy, pm me back, i have the ones we talked bout for you~
the other people, yeah you can find them. i ll have some soon avaiable for 25 or spoolin will have some as he just stated.
the other people, yeah you can find them. i ll have some soon avaiable for 25 or spoolin will have some as he just stated.
Thread
Thread Starter
Forum
Replies
Last Post
