Accusump???
03-22-2007, 09:09 PM
#1
Member
Thread Starter
Join Date: Nov 2002
Location: NY, us
Posts: 2,928
Likes: 0
Received 0 Likes
on
0 Posts
Accusump???
Any Accusump users on here? I was at a friends shop when they were installing it on an EVO and thought about running one. Seems like good insurance. I spun 2 rod bearings and looking to not spin another. Maybe it was motor build, heat, oil who knows but this seems worth it i think.
Opinions?
Opinions?
03-23-2007, 02:47 AM
#2
Honda-Tech Member
Re: Accusump??? (Mr HYDE)
racersteve runs one of these on his sfwd neon. maybe someone can direct this post his direction.
a quick search brought these to my attention
https://honda-tech.com/zerothread?id=1814708
https://honda-tech.com/zerothread?id=1772844
https://honda-tech.com/zerothread?id=1126098
https://honda-tech.com/zerothread?id=1748264
https://honda-tech.com/zerothread?id=1526854
https://honda-tech.com/zerothread?id=1093787
https://honda-tech.com/zerothread?id=1372851
https://honda-tech.com/zerothread?id=1313384
https://honda-tech.com/zerothread?id=1250260
............... i could copy and paste about 15more threads.
i searched "accusump"/archieved/topic titles. and it brought all of these up.....
Modified by dturbocivic at 6:57 AM 3/23/2007
a quick search brought these to my attention
https://honda-tech.com/zerothread?id=1814708
https://honda-tech.com/zerothread?id=1772844
https://honda-tech.com/zerothread?id=1126098
https://honda-tech.com/zerothread?id=1748264
https://honda-tech.com/zerothread?id=1526854
https://honda-tech.com/zerothread?id=1093787
https://honda-tech.com/zerothread?id=1372851
https://honda-tech.com/zerothread?id=1313384
https://honda-tech.com/zerothread?id=1250260
............... i could copy and paste about 15more threads.
i searched "accusump"/archieved/topic titles. and it brought all of these up.....
Modified by dturbocivic at 6:57 AM 3/23/2007
03-23-2007, 04:07 AM
#3
Mr. Badwrench
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
Re: Accusump??? (dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote">racersteve runs one of these on his sfwd neon. maybe someone can direct this post his direction.
</TD></TR></TABLE>
saved his engine at e-town spring race too. contemplating using one.
</TD></TR></TABLE>
saved his engine at e-town spring race too. contemplating using one.
03-23-2007, 07:02 AM
#4
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2000
Location: Bloomington, IN, USA
Posts: 10,180
Likes: 0
Received 3 Likes
on
3 Posts
Re: Accusump??? (Mr HYDE)
I have a 2qt unit bolted to the exhaust/shift linkage tunnel on the passenger-side just in front of the passenger seat. This way I could maintain the floor mat and passenger seat.
I used -8AN lines and a -8AN bulkhead fitting to span the firewall, and I used the -8AN o-ring port on a GE sandwich plate adapter to feed the engine (after the oil filter). It was the best way I could think of doing it without implementing an external filter system or without getting rid of the thermostat on the oil cooler sandwich plate.
To pre-lube, I turn the key to the IGN2 position and wait for the dummy light to go out before starting the engine.
I used -8AN lines and a -8AN bulkhead fitting to span the firewall, and I used the -8AN o-ring port on a GE sandwich plate adapter to feed the engine (after the oil filter). It was the best way I could think of doing it without implementing an external filter system or without getting rid of the thermostat on the oil cooler sandwich plate.
To pre-lube, I turn the key to the IGN2 position and wait for the dummy light to go out before starting the engine.
Thread
Thread Starter
Forum
Replies
Last Post
EK4Vti
Honda / Acura
42
03-22-2006 04:54 PM
