any of you guys running 99 civics whit oem fog lights and intercooler, pips?
i have full-race back door intercooler do you think i can sill use my fog lights whit this setup?

 

once again dave proves me wrong. looking at my eg i dont see how it could work but thats apples to oranges.

 

here is my 00 ex with a back door intercooler. 2.5inch piping fit under the light on the pass side.

 

you didn't have to modify the fog light at all. what intercooler are you using

 

if it helps i hear that you modify the fog light braket some to help clear the piping. aslong as its not the kind that the inlet and outlets are centered there is a way. i saw a few in the foglight thread in the appearance/cosmetics section.

 

pwr i belive 20x3 backdoor on driver. bottom exit on the pass side..

i belive i cut the bottom bracket off the fog light. it was 2 years ago.. lol i dont remember 100%

 

the full race pwr: 20x11x3
backdoor: drivers, passenger: middle
as seen on my eg:

 

No real modifications just cut the bumper up and used the lip to hide the IC piping.

 

if the outlet is at the bottom, yes it will work, but if it is full race's back door?

 

thanks for the help guys.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedcivicsir &raquo;</TD></TR><TR><TD CLASS="quote">if the outlet is at the bottom, yes it will work, but if it is full race's back door?</TD></TR></TABLE>

use a coupler to aim the piping down

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaveF &raquo;</TD></TR><TR><TD CLASS="quote">

use a coupler to aim the piping down </TD></TR></TABLE>

guess im a slacker, too many bends.

 

here a link for the intercooler i have.
http://www.full-race.com/catal...6d35a

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedcivicsir &raquo;</TD></TR><TR><TD CLASS="quote">if the outlet is at the bottom, yes it will work, but if it is full race's back door?</TD></TR></TABLE>

Ah, now that I reread the thread I understand why you posted an EG.

If you want fog lights get a different IC. You don't need foglights though, I'm just so uber JDM with my carbon fiber foglight covers that I had to keep them.

 

i already have the foglights in the bumper so i don't want to get new bumper.

 

you may get lucky, thats the 8" not the 11" if you already have the bumper, the lights and the cooler, whats the worst thing that can happen if you mock it up?

 

after i do a wiring tuck and brake line tuck then get the motor back in. then i can start mocking up the intercooler. just trying to figure out some of the stuff that i am going to run in to.