'94 up Integra LS IC pipings
12-26-2002, 07:50 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2001
Location: Clearwater, FL, USA
Posts: 2,503
Likes: 0
Received 0 Likes
on
0 Posts
'94 up Integra LS IC pipings
Anyone have pictures of their intercooler piping setup with the front bumper off? I'd like to see as much details of the bends as possible. Thanks.
12-27-2002, 07:41 AM
#2
Join Date: Apr 2002
Location: Greensboro, NC, US
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Re: '94 up Integra LS IC pipings (specie)
Don't have any pictures, but it's pretty easy to do. I'd recomend taking off your bumper and taking a look at it. I'm doing the entire piping setup with 4 u-bends from JCWhitney.com and some straightpipe I got from a construction site 
12-28-2002, 02:40 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2001
Location: Clearwater, FL, USA
Posts: 2,503
Likes: 0
Received 0 Likes
on
0 Posts
Re: '94 up Integra LS IC pipings (johnisenglish)
I was just wondering where it leaves the turbo and where the charge pipe goes since there is no room with the ABS pump.
12-29-2002, 11:37 AM
#4
Join Date: Apr 2002
Location: Greensboro, NC, US
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Re: '94 up Integra LS IC pipings (specie)
There's room, trust me, just do a 90 degree bend towards the driverside fender, then through the fenderlining (you'll have to cut a small hole for it) and then through a 180 degree u ben towards the Intercooler. I'll post pics when I get home
Thread
Thread Starter
Forum
Replies
Last Post
wantboost
Forced Induction
5
01-31-2012 09:23 AM
Die-Laughing
Honda CRX / EF Civic (1988 - 1991)
34
04-04-2005 08:06 AM
