OK so here is what I have. T3-T04B with a stage 3 trim wheel. 84mm bore, ported head, stock cams. Currently running 8psi on a darton sleeved block with stock *** injectors. I am now ready to up the boost to like 15psi, and am looking into the AEM or Hondata (any suggestions would be appreciated) I have brand new greddy 720cc injectors that I got through a trade awhile back. I am unsure if they are peak and holds or what (kinda doubt it) but was wondering if I could run 550s from RC. I guess if i am running one of the above computers it doesnt really matter does it?

 

No 720's aren't to big.
I would go with Hondata and go from there.

A good tuner can clear the problem.