60-1 to big
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 655
Likes: 0
From: Groves, Tx, United States
60-1 to big
ok... i sold my 57 trim for a new turbo i am going 83mm lsvtec with all forged bottom end and built head... but for the time being for about 2-3 months i have bone stock ls motor....i planned on getting a 60-1 for my new set up... but i was going to run it on the ls motor till motor is built... how will this turbo spool on a ls..and how far should i push the stock bottom end to???? on pump gas
Honda-Tech Member
Joined: Feb 2003
Posts: 9,820
Likes: 12
From: schooling kids in ny, usa
Re: 60-1 to big (lsvtechatch92)
i ran the 60-1 with a .63 exhaust on a stock ls for a few weeks. it didnt build full boost until a tad over 5000 rpms (10-11psi) and by about 4000 rpms it had around 3-4 psi going. the car felt smooth up top in boost, but i had that turbo on directly after i was using the 57 trim and it sucked because of the lag. a tighter geared tranny than the ls will make the 60-1 much nicer on the stock ls motor
Trending Topics
Honda-Tech Member
Joined: Apr 2001
Posts: 16,905
Likes: 3
From: Lansdale, PA
Re: (soon2b_EG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by soon2b_EG »</TD></TR><TR><TD CLASS="quote">What about on a H22? On 7psi?</TD></TR></TABLE>
you cant turbo h22's
you cant turbo h22's
Junior Member
Joined: Mar 2004
Posts: 218
Likes: 0
Re: (dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote">
you cant turbo h22's </TD></TR></TABLE>
Oh yea????????
you cant turbo h22's
</TD></TR></TABLE>Oh yea????????
Member
Joined: Apr 2002
Posts: 1,029
Likes: 0
From: Dallas, Tx, USA
Re: (dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote">
you cant turbo h22's </TD></TR></TABLE>
hahahha
you cant turbo h22's
</TD></TR></TABLE>hahahha
Junior Member
Joined: Jan 2006
Posts: 319
Likes: 0
From: Miramar, Florida, United States
Re: (dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote">
you cant turbo h22's </TD></TR></TABLE>
LMFAO, signature worthy right there!
you cant turbo h22's
</TD></TR></TABLE>LMFAO, signature worthy right there!
Re: (ragethemachine86)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote">
you cant turbo h22's </TD></TR></TABLE>
If dturbocivic says it, it must be true.
you cant turbo h22's </TD></TR></TABLE>
If dturbocivic says it, it must be true.
Honda-Tech Member
Joined: Feb 2003
Posts: 9,820
Likes: 12
From: schooling kids in ny, usa
Re: (herecomesboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote">
you cant turbo h22's </TD></TR></TABLE>
thats cuz vtaak and turbo dont mix
you cant turbo h22's </TD></TR></TABLE>
thats cuz vtaak and turbo dont mix
Thread
Thread Starter
Forum
Replies
Last Post