300whp nitrous b16a dyno
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2007
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
300whp nitrous b16a dyno
this is my all motor b16a with what was sopose to be a 150 shot it made 300 on the dot i need to order some new fuel jets and it should make more cause the a/f ratio was pegged rich on the dyno as soon as it sprayed
no clue on compresson but heres what i remember of the build cause i build it a year and a half ago
started with wiesco 11.5:1 forged pistons them milled the head 20thousands
spoon headgasket
eagle rods
honda bearings
stock bore and stroke and stock sleeves
supertech nitride flat valves
crower stage 2 3/4 race cams
crower dual springs/ titainium retainers
ebay 4-1 header
blox intake manifold
stock throttle body
stock head not ported
thats pretty much what i remember i had a 90 shot on this car for a year and it was makeing 261whp and went 11.60 but never got a good pass though now i figured idc so y not up the shot cause im building a h2b so i dont care if it blew
no clue on compresson but heres what i remember of the build cause i build it a year and a half ago
started with wiesco 11.5:1 forged pistons them milled the head 20thousands
spoon headgasket
eagle rods
honda bearings
stock bore and stroke and stock sleeves
supertech nitride flat valves
crower stage 2 3/4 race cams
crower dual springs/ titainium retainers
ebay 4-1 header
blox intake manifold
stock throttle body
stock head not ported
thats pretty much what i remember i had a 90 shot on this car for a year and it was makeing 261whp and went 11.60 but never got a good pass though now i figured idc so y not up the shot cause im building a h2b so i dont care if it blew
Thread
Thread Starter
Forum
Replies
Last Post
gearhead16
Honda Civic / Del Sol (1992 - 2000)
8
01-06-2008 06:42 PM