I am building a simple d16z6 at 10lbs of boost from a t3 60 trim.

Will I be fine with a manual boost controller? I saw the turbo-xs one and it seems suffiecient for me.

Also I plan on running the vafc 440 setup to tune my car. Anyone feel that this will be a problem, I know a few people who have done it on their greddy turbos, but mine will provide a bit more power at 10psi than the greddy 14b

 

all you need is the single stage turbo xs manual controlller works great and is cheap at 75 bucks

 

thanks i was hoping that would be sufficient.

 

Ive heard that the turbo xs standard boost controllers have spiking problems but that the turbo xs high performance MBC is the way to go. No first hand experience, just what Ive heard.

 

any boost controller is sufficient

 

halman mbc, used it on my wrx and am gonna use it on my single slammer rock hard baby

 

I am running the TurboXS MBC ($75 one) boosting 10 psi on my y7 with no spiking problems

 

I used a turbonetics MBC and it worked fine, seemed to spike just a tad, but it was easy to adjust and under $125.

 

I use joe p. mbc, works good