Notices

02 bung postion issue - unable to tune

Thread Tools
 
Search this Thread
 
Old 08-06-2010, 04:36 PM
  #1  
Honda-Tech Member
Thread Starter
 
azandford's Avatar
 
Join Date: Oct 2009
Posts: 862
Likes: 0
Received 0 Likes on 0 Posts
Default 02 bung postion issue - unable to tune

just replaced my downpipe and exhuast the other to a full 3 inch... we had to weld in a bung on the downpipe so we could run the wideband and tune..


when i went to tune the wideband wouldnt read correctly because my tuner said the bung had a leak and it was too close to the turbo... does this make sense?

the afr's were all over the place in boost but pretty steady through partial throttle.... sucks the most that i had to pay for the tune even though i couldnt because of an 02 bun
Old 08-07-2010, 10:30 AM
  #2  
Honda-Tech Member
 
cdaiscool's Avatar
 
Join Date: Jul 2010
Location: Ann Arbor, MI
Posts: 148
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 02 bung postion issue - unable to tune

Originally Posted by azandford
just replaced my downpipe and exhuast the other to a full 3 inch... we had to weld in a bung on the downpipe so we could run the wideband and tune..


when i went to tune the wideband wouldnt read correctly because my tuner said the bung had a leak and it was too close to the turbo... does this make sense?

the afr's were all over the place in boost but pretty steady through partial throttle.... sucks the most that i had to pay for the tune even though i couldnt because of an 02 bun
How close is the bung to the turbo? It should be around 18", IIRC.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ratchetEDsedan
Engine Management and Tuning
14
04-11-2017 04:31 AM
notsolfast
Engine Management and Tuning
13
05-03-2012 10:37 AM
FONK
Forced Induction
19
04-28-2006 04:49 PM
Tyler_Durden
Forced Induction
3
06-13-2003 06:36 PM
speshuled619
Forced Induction
5
03-22-2002 09:11 AM



Quick Reply: 02 bung postion issue - unable to tune



All times are GMT -8. The time now is 12:07 AM.