Anyone got any info on open loop tuning and proper way to induce open loop.

 

Open loop just means the O2 is not compensating the fuel tables so it's the same as having no O2 ... This is done in order to get readings on a wideband directly from the fuel map and not a compensated value based on the O2 corrections

 

So all I need to do is remove the O2. What about a check engine light.

 

You have a lot to learn OP.

http://www.ej9.ru/data/book/crome-v1...pro-dealer.pdf

 

so I take it that there isn't any methods that a can be done without that type of system

 

There is no jumper or hack to force open loop other than using an ECU editor such as those systems. Yes.

 

hondata has a drop down menu to put the ecu into open loop

Hondata s300 Programmable ECU Guide