Used Omnipower Drag Suspension-18k rear /10k-700 shipped for 92-00 civic ,94-00 integra







Modified by jorgie583 at 6:11 AM 9/6/2008

 

1600cc injectors (bosch injectors machined by rc, they fit honda/acura rail with no problem we use this units on our big builds, these are brand new) on set of 4 - 315.00 shipped priority

Crower billet rods for 1.8 (brand new with spec sheets.) PN B93728B - 625.00 OBO



HKS boost gauge (like new came off customers car) - 25.00 OBO

DC Sports header (came off b16/EK was used for around 5k miles) - 110.00 obo


Autometer gauges (used but cosmetically nice) all of them for 55.00 obo
included gauges, comes with only what pictured nitro . pressure, boost, afr, oil pressure.

 

Brand new xcessive intake manifold for Kseries.Looking to get around what i paid for it which was $445

 

F/S CIVIC 1992-2000 2dr/4dr VIBRANT TURBO EXHAUST IN PERFECT CONDITION,USED FOR LESS THAN 500 MILES,PART #10201 asking $300

F/S almost new only two months old full blown dual fuel pumps set up for 92-99 civic asking $350
i have pictures for both items

 

Location Fresno CA
92 si frame

-fiber glass
*MB sun roof
*MB doors
*MB front end
*franks customFAB back latch
*MB cage
*MB rear axle
*MB custom steering column w/momo steering wheel (quick release)
*staging e*break
*custom dash
*lexan windows all around
*ss brake lines
*kyb shocks w/ weapon R coil over
*1 gal fuel cell
*aeromotive a1000 pump
*aeromotive fuel filter
*AEM universal fuel pressure regulator
car is set up for k series
*circuit works 36mm hubs
*innovated steel mounts
*type s shifter box
*type s cables

*bogarts dragon fly
13x8
4x100
front:
MT 24.5/8
back:
MH 3.5/22/15
ASKING: 5000.00

*heres a old picture of the race car

**Carson Standard Car Hauler


GVW: 7000#
Jack: 2000#
Frame: 3 x 5 x _ Angle
Tongue: 4” Channel Wrap-Around Tongue
Brakes: 10” Electric (1 axle)
Ramps &
Storage: Standard
Floor: Elevated Floor, 4’ Dove Tail
Tires: Bias Ply 205-75R15

ASKING 1500.00
---------------------------------------------------------------------
Location Fresno CA
*<U>motor setup</U>

-stock head k20a2
-skunk2 pro serise valve springs and retainer
-skunk2 pro 3 cams
-rbc manifold

ASKING:1600.00

*<U>block</U>

-darton sleeves
-90mm custom wiseco pistons
-stroke 99mm
-cunninghan custom rods


ASKING:3400.00

*<U>tranny</U>

-02 rsx type s
-very low miles

ASKING: 800.00

*<U>clutch</U>

-Competition Clutch twin disc
-10 dyno pulls and 8 track pass

ASKING 900.00

*<U>fuel management</U>
-k pro -sold
-injectors RC 1200cc
-10 dyno pulls and 8 track pass

ASKING:280

*<U>water system</U>

- meziere electric water pump
-go kart fluidyne radiator
-all lines and fittings

ASKING: 350





Modified by sa90eg at 8:17 AM 9/5/2008

 

It will come out of my car and just drop it in yours. Motor is running. come by and do leakdown test and compression test. Motor only has 200 miles on it. I live in Hartford County in Connecticut. I rather not ship the motor cause its heavy. I can deliver in surrounding areas or meet someone in a good distance. Please Make me an offer. I know how much money I have in this motor. It will come with machine shop receipt. Throw some offers

$4500 OBO

B20 85MM Darton Sleeves Block
Water Pump
Oil pump
ARP Main Studs
CP 9:0:1 Pistons
Manley rods
ARP Head Studs
Greddy Timing belt
Fluidampr
P72 Head (port & polish)
5 Angel Valve Job
Crower Valvetrain
1mm Oversize Valves
CTR Cams
Hayme Cam Gears
JG Edelbrock manifold
RS Machine 74mm TB





Twin Bosch pump setup or Single Bosch setup. Comes with -10an line for feed, aeromotive 100micron filter. Complete setup made for civic and integra.
I will include the sumped tank at no cost, I just need your factory on in trade.






$600 OBO

4" Stainless Steel Exhaust with Magnaflow muffler. Fits better than factory exhaust.
Made for 92-95 civic hatch but I'm pretty sure will work on other models


$600 OBO

Turbo kit and catch can setup are for sale also, pm for info

 

complete stock gsr swap... no longer have the space or use it

4.7 final drive:circuit worx spool:AN-R side exit header:VictorX manifold:axles:shifter&linkages:
asking:3k

 

Selling my turbo
Garrett GT4202 with a 1.28A/R exhaust housing. Turbo has been freshened up recently and is in excellent condition. No shaft play at all.
Comes with an oil feed line fitting and a t4 oil return flange.
$900





You can either PM me here or email me at jake.montgomery@gmail.com

 

Crower Turbo Cams (K series) only 1000miles!
$375!!

B series log manifold, tial 46mm, and DP for EG $1000!!!!

Brand new Red EK carpet- $150

Brand new Turbonetics T62-1 SB - $700

Avid Racing cable billet aluminum cable/hydraulic transmission mount kit (EG, del, integra) - $100 (new)

Hybrid K series swap mounts for EG - $350 (new)

K20a2 bare blocks- $200

CF RSX Hood, painted silver on sides- $200

All prices do not include shipping, and buyer covers paypal fees or sends a cashiers check.
pix upon request. pm or email jenni@thehorsepowerconnection.com

 

FS:

H22 euro r intake mani - Sold

H22 JunIII cams w/jun cam gears - 950 shipped/ obo

H22 arp head studs only torqued once never on a running motor - $80 firm + shipping

H22 head, resurfaced and ready to slap on a block- 300/ obo

H22 cams B/O



Modified by elivtec at 6:22 AM 9/12/2008

 

AEM "Short" Coilsticks brand new in box. For b-series, d-series. *Sold*

AEM "Long" Coilsticks brand new in box. For h-series, k-series, s2000. *Sold*

AEM Twinspark CDI 4 channel ignition. Brand new in box. This is the latest/new revised box without issues. *Sold*

RC 1000cc peak and hold injectors. Brand new in box. Fit b/d/h series engines. 300.00 shipped.

2.0L B-series All Motor Bottom End: GSR block, GE sleeved, 86mm bore, CP lightweight X-skirt pistons (coated by Tbone), Manley lightweight I beam rods, balanced LS crank, new OEM bearings, oil pump, water pump, tensioner, main seal; comes with new OEM Golden Eagle 86mm head gasket. Made 248whp/168tq, has less than 300 miles and in like new condition. $2500.00

Prices firm. Shipping included to 48 states, if outside 48 states shipping is additional.


Modified by boosted hybrid at 8:33 AM 9/9/2008


Modified by boosted hybrid at 10:23 AM 9/15/2008

 

just a few items i need to sell to pay off some cc bills from last build
hondata s200 with boost and p72 ecu 325

brand new nlr ams 500 2 stage boost controller most bad *** controller under 500bucks retails for 400 plus shipping
380 shiped lower 48

golden eagle sleeved b18a block mains only can include crank if needed oringed 83mm ready to go 750 plus ship

hks ssqv bov used for 5k miles 125 shiped

ek/eg/dc stainless polished upper charge pipe with hks flange 50

custom t/3 topmount manifold 44 vband 600 plus ship

precision sc61/76 83a/r ported s housing 900 firm pending

turbo xs quad stage boost controller with relays 200 shiped

precision 350 hp front mount 200

lenso vdp gold fronts 4x100 with m&h tires have like 3 passes on em 575 plus ship

new in box eagle h beams gsr rods 350 plus ship

benson sleeved gsr block basically laskey shortblock built by earl has like 3k miles on it pauter rods cp pistons evrything looking for 2800 firm

gsr head supertech valvetrain v tec sol gsr cams vc everything 900 firm

edelbrock victor x manifold bare powdercoated gloss black 325 shiped

pics found here http://boostedblkefshugegarage...y.com/ if no pic email me at blk91si@yahoo.com

 

TURBO PARTS
IC Piping 2.5" hot 2.75" cold charge pipes Alum tig welded with Tial BOV flange t bolt clamps and couplers $200

FUEL
Complete Bosche 044 Fuel Pump and AN lines - with 2 -8 filters -8 feed and -6 return includes all AN fittings 500$
Golden Eagle Fuel Rail $100

MISC
Mazworx scattershield $150
M&W Ignition Setup with Crane Coil, T1 race harness, coil wire, and distributor $650
Edelbrock Victor X Manifold $250
Maxbore Throttle Body $100
97 ITR cams $225
Hondata S300 JDM P72 OBD1 - $550
AEM 5 Bar $80
T1 Valve cover with 4 -10 ports powdercoated black $175
2 Catch Cans with 3 -10 ports welded + -10an hoses and fittings$200


DRIVETRAIN/CHASSIS
DSS Stage 2.9 Axles $450
Full Race Traction Bars - not proam 299
Avid Racing Lower TQ mounts $ 75
JDM ITR Transmission with 4.7 FD, gearspeed syncros and LSD $900


WHEELS/TIRES
4x100 Black Slipstreams with mint 225/50/15 BFGs in the front and mint toyos in the back $470
M&H 25x8.7x13 BRAND NEW NEVER MOUNTED 300$
Gold Rattle Can Lenso wheels with good tread left 24.5x8.13
Comes with NEW M&H Tubes (required- w/out tube they leak) $390


OEM
B series Starter $ 75
B series Alternator $ 75
B Series Shift Linkage $100
OBD1 Vtec engine harness with resistor box $100
OEM Autozone Integra Axles $100

Westchester Crank98 GSR Cyclinder head $600
Stock ports
Supertech Dual Springs
Titanium Retainers
Newer Valve seals
Newer Valve guides
OEM Valves


Shell $3500
1994 Civic DX, Full Race 6pt cage, GSR Leather seats, CTR Steering wheel, Includes Autometer Tach, Greddy OIl press, Boost, and EGT
ARP extended wheel studs, GSR Front brake upgrade, GSR Rear disk and trailing arms


PM me or Email me

Dan @ Foleyelectrical.com


Modified by Danny_EJ at 1:34 PM 9/10/2008


Modified by Danny_EJ at 1:14 PM 9/11/2008

 

Turbonetics T3/T04 hybrid 57 trim has absolutely no shaft play
Turbonetics 38mm wastegate with dumptube
2.5 inch Downpipe
Precision 600 Intercooler Kit with Wiggins Clamps (purple)
75 mm Throttle Body
Drag Log Manifold





asking <FONT COLOR=""Red"">$1850</FONT> + shipping

 

https://honda-tech.com/zerothread?id=2384341

 

Here is what I have... Buyer pays shipping and paypal fees... Pictures available upon request...

-Garrett GT4294R (70 mm) with 1.15 a/r exhaust $900.00
-Clutchmaster's twin disc (center iron) clutch for b series ( 3 passes) $800.00
-ATI Harmonic Balancer $ 200.00
-Miezier Electric Water Pump with block off for water pump (complete kit including hoses) $ 250.00-pending sale
-AEM 1060 (Hal effect or stock ignition setup) $ 800.00
-Weld race light skinies with M&H 24" tires - $ 200.00 ea.
-Forward facing turbo manifold, dump tubes, front mount intercooler, 4" charge pipe, tial 50 mm BOV, 90 mm accufab throttle body, and edlebrock intake manifold, 4" down pipe- $ 2500.00
- 4" aluminum exhaust for eg/ del sol chassis and burns 2" muffler (all vbanded)-
$225.00pending sale
-Mazworks scatter shield- $150.00
-GSR transmission- $500.00
-Kirkey Seats with black cloth covers, and rails- $ 300.00 (set)
-PWR Half Radiator with FAL fan- $350.00
-Timing belt Front Mount tensioner (additional tensior) $40.00
-crower 402 all motor cams $250
-Scavage return oil pump $50.00
-Magnafuel 750 fuel pump, 2 fuel filters (100 micron stainless), Fuel pressure regulator- 10 an feed line, 6 an return $ 500.00
-High Tech Turbo Manifold with 40 mm HKS wastegate and dump tube (t3)- $400.00
-FAL single fan shroud and motor, no blade (blue)- $30.00
-2 piece aluminum catch pan (NHRA Legal) $50.00
-Rear t bracket for b series $30.00
-Front suspension froks (set) $20.00
-Hasport motor mounts, Solid insert on rear, $ 200.00
-Apexi SAFC- $175.00
-Apexi turbo timer- $50.00
-Edlebrock fuel rail $50.00
-JDM 1 piece del sol headlights $200.00
-Carbon fiber del sol Hood OEM- $100.00
-MSD pn6562 Boost retard controller $100.00
-MSD pn8912 Tach adapter (2) $25.00
- Nippen denso 550 cc side feed injectors, new (6) $25.00 ea.
-GM boost controller siliniod with wire $20.00
-Autometer LED shift Light, Boost gauge, Vacuum gauge, and oil gauge with braded line $50.00
-Tilton Control valve for clutch with 3 an braided line and new slave cylinder $50.00
-Moroso 1 quart aluminum overflow tank $30.00
-Tech edge wide band with ntk sensor and display (2 units) $180.00 ea.
-4" flex with v band- $ 30.00


Again pics are availble upon request.. or you can call me...


Modified by jpenman50 at 4:53 PM 9/12/2008


Modified by jpenman50 at 8:39 PM 9/13/2008


Modified by jpenman50 at 12:43 AM 9/16/2008


Modified by jpenman50 at 12:25 AM 9/26/2008


Modified by jpenman50 at 8:53 PM 9/30/2008

 

i got a full race tubro kit for sale need cash....
full race t4/44mm manifold
t4/t67 garret turbo
44mm tial wastegate
full race back door intercooler
50mm tial blow off vavle
oil lines
inercooler piping

$2600 shipped

 

inline pro stainless manifold, ported and modified for a tial 60mm gate, along with a 4" stainless downpipe. $750 for the pair.

 

Welp...the time has come. Tried to hold on this project as long as I could. Car is located in the Sacramento Area. It needs to go to a good home.
1990 Honda CRX Si Chassis.
-rollbar done by LoVital @ 1320 Custom Fab when it was still around.
car is built and design for the ALL MOTOR PRO category. Has rear wheelie bar mounts as optional.
-MB fiberglass 1 piece front end
-MB fiberglass doors
-MB rear straight axle
-Wilwood brake calipers and pads
-QA1 Long shocks and springs

Rear Axle Alone could easily go for nearly the asking price of this race car.


I have an extra 88-91 CRX MB 1pc. front end unpainted in excellent condition
for sale. make offer!

This is a solid and straight chassis.
This vehicle is intended for race purposes only and sold as is.

Prefer not to part out.

$1,500 or best offer takes it. Willing to tow race car to buyers house within reasonable distance.













Thanks for looking.

 

FS: 1993 civic EX coupe race ready shell (st. paul, MN)
http://www.hondamarketplace.com/zerothread/2385168


I have a set of brand new koni yellow struts for the rear of a 89+ honda civic/94+ integra/ delsol. These have a lifetime warranty and are the best of the best.

sold the springs

$200firm (these are over $260 from a dealer)
651-528-3257




Modified by paulzy at 1:18 AM 9/13/2008

 

fs IS pETER hEU 890hP iNTEGRA. Car has the following

Ehine
aebs o ringed block
Type R crank balanced and polished
Pauter rods
CP pistons
ARP head studs

Head
Gsr head, Headflow port polish
Ferrera valves 1mm
Ferrera titanuim springs and retainers
type R cams
BDL cam gears
JG intake manifold
74mm bdl throttle body

transmission/axles
00 Gsr tranny/ Quiffe installed
dss stage 5 axles
Competition Twin disk


fuel
Aeromotive a1000 fuel pump
Aeromotive 1:1 Fuel presure regulator
BDL fuel Rail
Rc Injectors 1600

EMS
Hondata S300
Innovative boost controller 5 stage

Ignition
M&W Pro 10
Crane coil
MSD wires

Turbo
Turbonetics super 76
Neukin PRo turbo manifold
greddy type R wastegate
tial 50mm Bov
4 inch down pipe
Intercooler Spearco liquid cooled,with Spearco pump.

Raditor
Fluidyne/with slim fan

Gauges
Autometer water, oil, Tach

Chasis/Driveline
Suspension Omini drag coilovers
camber skunk 2
10 point roll cage installed

Drag wheels
Welg Magnums 13x9 front and 15x4 rear
24.5x9x13 slicks on front, 22.5x4.5x15 on rear

Extior
Jdm front, CW front bumber, carbon fiber hood, OEM side skirts

NUMBERS!!!!!

36 psi made 890 at 9200 rpms

This car has run alot of LOW 10 sec passes at Commerce,the fastest too date was 10.01 at 149 mph. THis car has all the potential too run low 9s at a decent track. ASKING 18,500


Pics

 

EG/DC traction bars $175 shipped




Modified by skunked at 9:37 AM 9/16/2008

 

H series Saenz forged straight cut gear set (3.071 1st, 2.153 2nd, 1.667 3rd, 1.30 4th and 1.00 5th gear)… they are pretty short… My 600 + WHP H made VERY short work of the gears even in the heavy CD5. The car accelerated ridiculously quickly. Fifth shifts smooth, just like from 2-3. Not the typical H series hard shift. Its whiny and sexy, I drove it on the street. Uses stock Countershaft... and the input is forged Saenz (all gberars are straightcut). Never had an issue with either, but have an extra FD I'll include...

M2Y4 case (seriously MINT, looks like NEW) that’s been checked for cracks.

New OBX LSD with less than 200 Miles on it.

New OEM case bearings

New OEM diff carrier bearings

New OEM shims

New syncros.

I’ve run only Redline Lightweight shockproof oil in it.

Box shifts like butter and is in VERY good shape. Everything is MINT… and new or very close to new. I have replaced 3rd gear with their newer updated one as well… OBX diff was installed with new carrier bearings (OEM) and shimmed fror proper preload.

I have all contact info for Saenz and a working relationship with Gabriel in Argentina where the parts are manufactured (yes all replacement parts are available for it). It uses OEM syncros.

Selling my car and put a JDM LSD tranny in it for the sale. SO, this box has to go.
Asking 3500 Shipped, I’m negotiable, but will NOT part it out.


Thank you.








UPDATED 3rd gear:





Modified by extralargenog at 4:35 PM 9/15/2008


Modified by extralargenog at 1:42 PM 9/22/2008

 

do u still have the omni power if so how old is it

 

!SOLD!Neptune RTP with bluetooth module. $425 OBO shipped via USPS Priority mail.

!SOLD!

Modified by 808 NA1 at 9:22 PM 9/16/2008


Modified by 808 NA1 at 6:16 PM 9/24/2008