E.Honda

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 &raquo;</TD></TR><TR><TD CLASS="quote">Here is mine.... not 100% complete when I took the pics.




It's done now, but no updated pics....

</TD></TR></TABLE>

Seems I recall reading that carbon fiber/kevlar will transfer electricity.

E.Honda

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LA_HONDAS &raquo;</TD></TR><TR><TD CLASS="quote">anybody know where i can buy obd1 ecu plugs and pins
</TD></TR></TABLE>

I have a set of plugs with about 10 to 12 inches of wire on them.

Kevin

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by E.Honda &raquo;</TD></TR><TR><TD CLASS="quote">Seems I recall reading that carbon fiber/kevlar will transfer electricity.</TD></TR></TABLE>

Carbon most definetly conducts electricity, i've had switch panels short out because of it.

RedneckRicer

im getting everything ready i think i got everything i need to start this wiring project. but i need to make sure that im not forgetting any accessories that i need to power

1. Headlights
2. Foglights
3. ECU
4. MW pro 10
5. Tail Lights
6. turn signals
7. gauges
8. Fuel Pump
9. Radio
10. Fan

would anyone else recommend another accessory?

DaveF

as you can see on my tray i have 3 relays/fuses, one is for ecu, the 2 others are for injector power. im not sure how many injectors you plan to run, but id put them on a seperate relay/fuse then the ecu(output side)
the switch can turn them all on at the same time.

RedneckRicer

ahh thank you sir forgot about that.. I still need to order my FJO driver.. added it to my list.

E.Honda

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RedneckRicer &raquo;</TD></TR><TR><TD CLASS="quote">im getting everything ready i think i got everything i need to start this wiring project. but i need to make sure that im not forgetting any accessories that i need to power

1. Headlights
2. Foglights
3. ECU
4. MW pro 10
5. Tail Lights
6. turn signals
7. gauges
8. Fuel Pump
9. Radio
10. Fan

would anyone else recommend another accessory?</TD></TR></TABLE>

Horn, distributor, starter and license plate light.

Kataku2K3

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by E.Honda &raquo;</TD></TR><TR><TD CLASS="quote">
Seems I recall reading that carbon fiber/kevlar will transfer electricity.
</TD></TR></TABLE>

So do the aluminum plates others are using.

Joe, looks like you need an ECU boot, eh?

Travis' mess of ****!



Modified by Kataku2K3 at 10:44 PM 7/1/2008

RedneckRicer

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by E.Honda &raquo;</TD></TR><TR><TD CLASS="quote">

Horn, distributor, starter and license plate light.</TD></TR></TABLE>

car has no horn... dont need any dizzy wiring since im running the MW pro 10 and crane coil( i thought big 12v line that went to the dizzy fed the ICM and the coil.

Car has a push start button so ground trigger is off that. Liscence plate lights are going to be ran off the rear parking lights.

RedneckRicer

so since aluminum and carbon can conduct electricity then what the hell do you mout everything to? steel is gonna conduct as well

ALL IMPORT

i use aluminum no problem. u got no choice, u mount your battery 2 metal & u dont have problem

DaveF

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RedneckRicer &raquo;</TD></TR><TR><TD CLASS="quote">

dont need any dizzy wiring since im running the MW pro 10 and crane coil( i thought big 12v line that went to the dizzy fed the ICM and the coil.

Car has a push start button so ground trigger is off that. </TD></TR></TABLE>

1st question, (blk/yel dist. power, yes it does power the icm and coil)

2nd thing- push start button, you need to apply 12v to the pigtail on the starter, or are you triggering a relay with the ground signal ?

tony1

Doesn't matter if they're mounted to something conductive or not as long as you're not hooking the plate up to 12v. lol

boostedh22a

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">Doesn't matter if they're mounted to something conductive or not as long as you're not hooking the plate up to 12v. lol</TD></TR></TABLE>

That's what I was thinking

Also, who makes that relay setup on the the gold bar. I see that quite a few of you run it, and was wondering who made it, and where I could purchase it?

tony1

We sell the relays and relay bars if you need them.

LA_HONDAS

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by E.Honda &raquo;</TD></TR><TR><TD CLASS="quote">

I have a set of plugs with about 10 to 12 inches of wire on them.</TD></TR></TABLE>

i can get ecu pigtail plugs all day long for free

i wanted uncrimped obd1 plugs n pins

but thanks anyway

boostedh22a

I didn't see them on your website anywhere?

tony1

Yeah, they're not on there. We have tons of stuff that isn't on the site yet. I don't have a dedicated web guy so slowly but surely on getting everything on there. You can call the shop if you need to order them or pm me for pricing.

NRGtechParts

We have all of this stuff in stock, from tefzel wire in all sizes, rachem shrink in every size probably about 100ft of each size, autosports, deutsch connectors, transitions among other things. I am pretty sure a couple people around here have gotten things from Miller before.

If anyone needs anything please feel free to pm me and i will be able to get you pretty much anything you need.

tony1

lol

0Innes

iTrader: (3)

oh, me, me, me, me, me -- pick me......

DaveF

E.Honda

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kataku2K3 &raquo;</TD></TR><TR><TD CLASS="quote">

So do the aluminum plates others are using.

Modified by Kataku2K3 at 10:44 PM 7/1/2008</TD></TR></TABLE>

Thank you captain obvious.

It was meant to inform those who do not know.

RedneckRicer

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaveF &raquo;</TD></TR><TR><TD CLASS="quote">

1st question, (blk/yel dist. power, yes it does power the icm and coil)

2nd thing- push start button, you need to apply 12v to the pigtail on the starter, or are you triggering a relay with the ground signal ? </TD></TR></TABLE>

I will have to run that power wire any ways for the coil.

the car is going to be Key less. so i will hook up the the starter signal wire to replace the Ground switch on the starter.

NRGtechParts

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaveF &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>

is there a problem with what i said?