Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

I'd advise reading the rules to clarify. Next time it's gone for a full month

 

dart block built by nrg tech to 1000whp specs......plus extras.........5500
nrgtech billet bellhousing....................................... ...................1550 shipped
toda camgears new in box............................................... .........280shipped
4inch aluminum exhaust.......with burnstainless ............................700
aebs intake manifold...b16 head.............................................. ...120shipped

 

H22 head FRESH from the machine shop with BNIB Ferrea flat faced valves. 500 OBO



B series Supertech block guard BNIB 90 OBO


AFI B Series Ram Horn Manifolds T3 44mm wastegate BNIB 799 OBO


K24 OEM Crank 175 OBO


Competition Clutch K series twin disc BNIB 1000 OBO

 

sold

 

selling a brand new tial MV-R wastegate. Comes with the springs to make 11psi. Has all the flanges, clamps, and valve seat

$325 plus shipping and paypal

 

Mase Engineering Turbo Kit S2000

Mase Turbo Manifold T3 w/ down pipe, 2 dump tubes and heat shield $1550 shipped
Tial Q BOV w/ new Flange $215 shipped
Tial MVS 38mm wastegate $215 Shipped
Precision Intercooler $350 shipped

 

Sold

 

Full race top mount turbo kit. $1600*. t4 non twin scroll
Tial BOV, Precision wastgate and Intercooler
********Only missing turbo!*******


14x8 bogarts with 26x8.5x14 M&h tires with tubes. *$550



Brand new Blackworks coil overs shop display never mounted.
•SPRING RATES:
•Front 10KG (560lbs)
•Rear 6KG (336lbs)

$550


Control panel / msd with two step and two rpm avtivated switches auometer cluster. * ***** make offers on what you want****






MB one piece front end with hardware. $500




Side mount bracket bolts to door hinge location

Front mount bolts to factory bumper support location



Total 20 lugs. *

Never used opened slightly to see if blue matched my project. *Too far off so $65 firm picked up





albums/r313/monEmakindave/forsale/th_78c42536.png[/IMG][/URL]

Sparco pista seat with sparco drivers side rail for civic/integra



Lil bit fading left side. Don't mind wrinkle it ll come out had another seat laying on it



Sparco speed with sparco rail and slider for passenger side civic/integra



Lil fading on right side


Both seats with rails. *$500

 

Brian Crower Stage 3 NA Cams (B -Series) 350 Shipped
Have about 40, 1/4 Mile passes on them. In mint shape.







Full Race 3inch V-band Down pipe 250 Shipped
One scrap on bottom doesn't leak at all. No dents
Is wrapped but is coming off alittle.







3 Inch SS Exhaust with Magnaflow muffler for Ek Hatch 250 Pick up.







FJO Wideband with NTK Sensor 200 Shipped
Includes Controller, 4ft sensor wire, and NTK sensor. All perfect working shape

 

Slightly used PT6768 CEA, dual ball bearing, a few dyno runs, 0 street/track miles. $1500 shipped and paypal.
T4 Front Mount Manifold, 44mm wg flange. $700obo shipped and paypal.
9.2:1 JE 84mm LS/Vtec Pistons, BNIB, $490 shipped.
BC Stage 2 turbo cams, BNIB, $425 shipped.

Email me at dustinmonroe.ng@gmail.com

 

IF INTERESTED CALL 973)390-2982

B-series shift linkage with a B16 shifter*

4" aluminum exhaust $650





custom catch can sits next to the battery $275
the bracket is welded onto the battery tray*

comes with
battery tray w/ bracket welded to it
all 4 lines and fittings minus the 2 fittins on the actual block




wrinkle blue valve cover $100

 

60mm Tial Full-Race wastegate $350 Clamps no flanges.


BBK 70mm throttle body $200


JG 8 injector GSR intake comes with bottom rail and hardware $275


Full Race single scroll for 60mm wastegate T-4 turbo manifold. NO WASTGATE SOLD

Apexi tach, Blitz carbon fiber water temp and oil gauges in a EG dash pod. make offer

 

Sold!!!

 

Set of 3 used eagle rods - 5.430" length for B18C1 GSR Crank. $125


3.5" vanjen coupler setup
Clamp is slightly used
Flanges are brand new




80$ out the door !!

706-346-6024
matt.stover@comcast.net

 

F/S BRAND NEW COMPETITION TRIPLE CLUTCH..STILL IN THE WRAP $1300

 

i have a top mount manifold made by the brothers racing for sale
also come with 3' vband downpipe wrap with heat wrap. 600 plus shipping & pp fees

also a back door intercooler with a tial bov flange on the side 3" in&out
core size is 20x11x3 garret core! 600hp $450


pm for any info. than you

 

LS Crankshaft $185.00
Completely stock B16 Cylinder Head $505.00
Innovate LC-1 $125.00
Aluminum Radiator $150.00
Clutchmaster FX400 Clutch and Exedy Chromoly Flywheel $505.00
5 Bar MAP Sensor $150.00
B-Series Aluminum Intake Manifold $135.00
B-Series ProFlo EFI Fuel Rail $165.00

Prices are negotiable. PM for details. Thank you

 

Full Race T3 Top Mount w/ 44mm WG Flange & 4" Down Pipe (dented on bottom) - $600












Spec Twin Disc Clutch (Zero Track miles, street driven 250-300 miles) - $850









ACT B-Series Extreme Duty 4-puck Clutch/PP Kit with OEM GsR Flywheel....$225











Innovate Wideband with Gauge, Sensor and control Module - $120 obo

 

1997 Acura Integra
Title in hand
$10,500
Contact - 757-619-0690 or pm

Car has current inspection, tags and insurance.

I bought this car with the intentions to race again but thats not gonna happen so up for sale she goes.

Engine/Drivetrain:

K20A Engine
Eagle Rods
Wisco Pistons
ACL Race Bearings
ARP Head Studs
Ferrea valves, valve springs & retainers
Edelbrock 75mm TB
Edelbrock FPR
1600cc injectors
Full-Race Exhaust Manifold
Precision Intercooler
Garrett 4088R Turbo
(2) Tial 44mm WG
4" to 3" Down Pipe
3" Thermal Exhaust w/ Vibrant Muffler
Type S 6-speed trans. w/ Quaife LSD
DSS Stage 3 axles
Carbonetics Twin Disc clutch - carbon/carbon
Scattershield
Koyo RSX Alum. Radiator


Suspension:

KYB Adjustable shocks
Skunk 2 drag race springs
Full-Race traction bar
Energy suspension bushings

Interior:

Apex Guages - oil, boost, water temp
Del Sol seats
Momo wheel
RCI belts
AEM engine mangt.
AEM wide band
10pt cage (expired) NHRA cert
Turbo smart boost controller


Exterior:

CARBON FIBER - Hood, Side Skirts, Trunk and Front Lip
JDM 1 piece headlights, sidemarkers
Painted s2000 Silverstone metallic

Wheels:

15X7 Rays Gram Lights
Cross drilled rotors
(2) new front tires


I'm sure im forgetting some stuff but any questions give me a call.
Attached Images

 

B16 Victor X intake mani $225
Bosch 1600cc injectors $400
STR 68mm TB $175


3 piece front $650 + shipping


Tial 50mm BOV $175.


BN Blue Print Racing LS-v/Gsr head studs SOLD.
I Also have a used set, TQ once GE head studs $65 +shipping
[IMG]http://i458.photobucket.com/albums/qq303/spockeg/2012]

 

Kens Kustom wheelie/traction bars unused


3pc exospeed **CLOSED FRONT** -850 firm


cms racing spindle mount 15x4 make offer



franks fiberglass hot rod style 1pc front end-- make offer



P29 pistons and rings 100

**items for sale do not include shipping or pay pal fees**

 

Full-Race intake manifold for GSR Head. With Accufab 75mm Throttle body.
Bought this from JAson Hunt a while ago now, never ran it on my car. Didnt realize until I had it that It was for a GSR, I need a b16.
Looking to get what I payed for them, 650$
Buyer covers shipping.

Will accept trades on a B16 Manifold. Full-Race/Golden Eagle/BMC

 

Garrett Gt4294 Twin Scroll 94ar back housing no shaft play spins freely $700

 

H22 Turbo Manifold - $700
Built by Innovative Turbo Sysytems back in 2003. Was fully polished, bead blasted now. T4 single scroll and two bolt 38mm wg flange. Thick wall stainless steel TIG welded construction. Very durable, been used on a street car for years. I'll include an adapter to run a 44mm v-band wg. Including downpipe too.




Precision Turbo 1000cc Injectors - $200
Used, but in excellent condition.



99-00 Carbon Fiber Hood with Custom Scoop for Full Race K24 manifold - $200



Tilton H22 Cerametallic Twin Disk Clutch - $1000
Less than 10 passes. Excellent condition. Had my machinist clean up the flywheel bolt mounting surface, it got a bit worn.





H22 CNC Ported Cylinder Head. Ported by R&D Dyno Service. - $600
Includes cam caps, rocker assemblies, shafts, LMAs, dual springs and Ti retainers. Intake #3 has full valve guides, all other ports are cut back to the port wall. I'd recommend getting new springs and retainers.








Sparco Steering Wheel with EK hub - $75
About six years old, leather pulling back a bit. Includes horn button.




Aeromotive ELIMINATOR 11104 Fuel Pumps (2 Avail) - $250 each
One has a slightly bent mounting ear. Will include fittings with that one. Other one is freshly rebuilt from Aeromotive.