built b16 GE sleeved , oringed , carillo/cp, b16 head supertech VT pro1s , ati damper-5000
sheepy top mount t4 single gate open-700
AFI polished b16/itr intake mani-700
pte 6266 t4 .96 ar brand new-800
dss 5.9 used new hubs and ARP studs -1400
turbo smart 45mm gate brand new -200
tial 50mm bov used -175
comp twin disc 3 dyno pulls on it -800
buyer pays shipping and fees

also looking to sell my drag car
92cx civic
gsr swap (pistons and rods)
inline pro mani
jg intake mani
rc1000s
dss3.9s
gsr trans
comp twin disc
3 piece front
skunk2 lcas
omni power drag coilovers
carbon fiber hood , trunk and ccc wing
hondata s300
2 tunes
car makes 405 on pump ran 11.4@121
car makes 625 on c16 ran 10.4@141
no wheels 6,000 or lenso slick/skinny setup for 7,000

513 403 9282

IMG_20150602_174605 by 93 red ls, on Flickr

IMG_20150602_172223750 by 93 red ls, on Flickr

IMG_20150602_172116487 by 93 red ls, on Flickr

IMG_20150602_172103464 by 93 red ls, on Flickr

IMG_20150602_172024697 by 93 red ls, on Flickr

IMG_20150602_171942518 by 93 red ls, on Flickr

IMG_20150602_171817277 by 93 red ls, on Flickr

easy way to contact is via text my flikr account is acting up not allowing me to transfer all my pictures.

 

BNIB Injector Dynamics ID1000 fuel injectors with connectors and pins. Will fit all models of Honda and Acura engines and may fit others. $425 FREE Shippimg Any questions please email or PM.

 

13x9 Weld Wheels and 25x8.7 M&H Slicks with 14 passes $875 OBO


K24 Block no mains caps $100
K24 Crank $100


Borg Warner S400X 67mm Turbo
1.10 AR housing ( This has been a great turbo for me! )
$900 OBO

Message or text me eightfivesix371199two

 

WILL DELETE PARTS AS THEY SELL. CALL OR TEXT 360 6THREE2-997TWO

Precision billet 72 BB with 1.44 a/r $1800
AEM D series cam gear new $50
Tail 44mm wastegate. $250
apexi turbo time with under dash harness no need to cut or splice. $100
GM 3 bar map $SOLD
AFX wide band O2 brand new $SOLD
Rywire B series tuck harness $550
Golden Eagle brake booster brace $80
Gforce 5 point harness (exp) $40
Port Flow ported GSR head with Super tech valves, springs and retainers $1300
B16 stock ports with super tech springs and retainers with Ferrea valves and Ferrea bronze grids $1300
M&W PRO 10 ignition box with crane coil T1 harness $500
SSR 2 inch Blue seat belt $30

 

FOR SALE
All parts have just been picked up from my machine shop and are cleaned, checked, and ready to go!
AEBS B20 Block, Fresh Bore & Hone to 84.5mm w/ polished crank $1300



Pauter LS Rods $450



Built PR3 Head - Inline Pro Valvetrain, Ferrea Valves, Bronze Guides, Port & Polish/Valvejob, Skunk2 Tuner 1 Cams $1750