Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

im selling a used full set of H-series ferrea +1mm intake valves and honda OEM exhaust valves, im asking $300 +shipping i can be reached at 516 342 0318 i am located in long island, NY




TESTING WATERS: for sale my 95mm complete shortblock, this went 10.41 @130 mph and had more in it but i built a bigger motor. i can see this little motor going a .30 once properly dialed in. this shortblock was freshend up by randy owens over this winter so everythign is fresh and brand new. it has new main and rod bearings, new thurst washers, fresh hone and pistons rings. its ready to rock. the motr consists of the following

JDM CLOSED DECK H22A
ERL SLEEVES
KS TUNED BALANCE SHAFT DELETE
NEW OIL PUMP
CARILLO H22 LENGTH RODS
CUSTOM CP PISTONS (MAX DOME/MAX COMPRESSION)
BRAND NEW OEM USDM NON VTEC PRELUDE CRANK 95MM

for more info contact me at 516 342 0318 im located in long island, ny

 

for sell is a brand new fcs 5gl fuel cell with sending unit the tank will come with 15 ft of 10 an line and 15ft of 8 an line im looking to get 600 for the package

 

NEW B&R Breather Tank - $220 FREE Shipping

CNC machined bungs and filter tubes
Internally baffled design to keep oil inside breather tank
1Gallon
4 Feeds, 2 Drains
Fully tig welded
Anodized Black
Laser etched logo
3 Earls Ano Tuff -10 Caps Included
3 New Filters with Chrome Tops as pictured Included





92-95 Honda Civic 1 Piece Headlights - $120 FREE Shipping

Brand new, Never used
Black Housings
Amber Corner




Hytech 4-1 Drag Race K-Series Header - $1650 FREE Shipping Paid $1775

Brand new, never used
Stainless Steel
Megaphone with reverse cone
Anti reversion chambers on each runner
O2 bungs in each runner and 1 in megaphone
4 ports matched plugs for each O2 bung when not in use
3 step header design - 1 3/4", 1 7/8", 2", 2 1/8" exit
No waiting several weeks for a race header, this one is ready to go




Fluidyne 92-95 Civic Half Sized Radiator with FAL Fan - $375 FREE Shipping

Great condition
-16 Earls bungs
No leaks, ready to install

 

For sale is a full race outlaw t4 divided forward facing turbo manifold from our true street civic. Manifold had (4) o2 bungs added for individual cylinder monitoring/tuning, and -4 a.n fitting welded to collector for Emap monitoring. Manifold comes with Tial 60mm gate, dumptube and 4" stainless up pipe w/ 2 o2 bungs. Everything is in excellent condition. $1750.00 shipped in the 48 states.

Also have (2) sets of R&R aluminum GSR/B18c length connecting rods with ARP L19 upgraded rod bolts. Brand new, still in the box. Rods were designed for 300 hp per cylinder. $800.00 shipped for each set in the 48 states. We can offer drilled brand new ACL race rod bearings for an additional $50.00 per set if needed to match rods.

Please email sales@evans-tuning.com or PM for questions or to purchase.

 

Upgrading my setup so getting rid of some things to go bigger!

Everything is still on the car and the car is still running without any issues. Check my sig for power numbers as well as the times I ran with this setup...if you have any questions or want specific pics PM me your number and I can text it to you.

97 complete GSR shortblock with clean VIN (will write bill of sale if purchased)
81.5mm stock sleeves
GSR crank
Arias 9:1 pistons 81.5mm
Eagle Rods
ACL Race bearings (changed end of last year)
Does not smoke
will include tapped oil pan
$1050 OBO

Spoolin Performance Topmount T3 manifold w/Vband 3" downpipe (wrapped) and 44mm wastegate dump tube- $800 OBO
Garrett GT3076R ball bearing turbo barely any shaft play no leaks no smoke in great condition - $800 OBO
Purple Tial 44mm wastegate w/11lb spring - $320 OBO
1000cc low impedance injectors - $320 OBO

Kirkey 09800 Racing seat
17.5" wide 20 degree layback
Double rib protection
Red Vinyl cover
No harness or rails included
$220

VIS Carbon Fiber trunk for DC2 94-01 integra 2dr
Good condition
no cracks on CF
Needs a bit of sanding and clear coat to make it flawless
Comes with OEM GSR glass non-tinted
$420 OBO (pickup only please)

Rear RSX black leather seats customized to fit in a 94-01 2dr integra
$100 picked up

Please no stupid comments or lowballs...keep ur 2 cents in your pocket..have a question or an offer just ask! I will add more items when I can think of some. Thanks for your time.

 

All prices are + shipping and paypal fees.


Rolling shell-$10k non neg price! Don't ask! This is a crackhead price! 25.5 cert chassis, Progress custom coil over setup, custom front, shaved bay, custom flat paint by Goolsby customs, fiberglass tailgate, CCC spoiler, carbon hood, weld ...rear skinny's, Exospeed 15x9 fronts with 26x9 toyo's, Kirky seat, stroud window net, custom staging brake, stroud parachute, sumped tank, Mfactory LCA, and I don't know what else I'm forgetting. I also have enough carbon wrap to do the hood, tailgate, and rear diffusers. I will do that before it leaves here.








Chase Bays b series mil spec harness-$1000


New Honda engine bearings-$125
There are 26 bearings in there. Probably $250 worth.


15 used Crower valve spring retainers. 1 missing for some reason.-$75


AEM fuel rail for b series with sample valve and SX regulator-$150



Hks bov-$50


Unknown intercooler-$50



F22 drag turbo manifold-$50



BDL 70mm throttle body-$200



MSD 75314 4cyl ignition box w traction control-$500



Stock B18C1 longblock, new cam seals, rear main seal, oil pan gasket, valve cover gasket, oil pump, water pump, tensioner, and timing belt. Was gonna be my beater engine, do it's got everything you need new to make it run for a long time. $1100 timing belt and cover not in pic. also, will have stock oil pan and pickup installed.

 

Price: $3500

New price 3000!!!!!

Description:

Brand new Synapse B-series dual gate divided top mount turbo kit

Divided t4 topmount
dual tial mvs gates
tial q bov
garrett 35r oil and water cooled with jet coated exhaust housing
Power coated intercooler piping
Oil and water lines
Back door intercooler
Stainless Down pipe and dump tube
Couplers and t-bolt clamps


Pictures:


Attachment 524366
Attachment 524367
Attachment 524368
Attachment 524369

 

FS: Precision GT4272r 1.28 housing, T4, Ball Bearing turbine wheel has damage...
$1020 Price includes Paypal fee NOT shipping **SOLD**SOLD**SOLD**

Borg Warner 72mm Class Limit s400sx Has race Cover, T4, 1.10 Housing Billet FMW wheel, 87mm turbine wheel, capable of 1100hp. This turbo has 2 dyno pulls and 1 track event... Pretty much still brand new....
$2150 Price includes paypal fee... NOT shipping

I will not ship out of the US...

Please text for fast response.. 714-388-7303

If you arnt ready to buy please do not ask 50 questions about the product...
THANKS

 

For Sale


- Full Race IC 2.5" hot side 2.5" outlet rated for 750hp 20"x10"x3'' SOLD
- Borg Warner s400sx turbine housing for the 72mm turbo 1.10ar never used brand new 100.00

 

Lenso drAg 13x7.5 4x100 wheels no tires just the wheels powder Coated supersonic blue.
$400 shipped

 

FS: NX 4 cylinder direct port nitrous, 10lb bottle, and purge brand new! SOLD!

Bidding ends Sunday!
http://www.ebay.com/itm/201119152820...84.m1423.l2649

 

FOR SALE: PRICE DROPS!!!

Brand new Ferrea std size bronze valve guides-$75 shipped in US.


FS: custom turbo kit for b series

BST twin scroll top mount for b series, t4, twin 44mm flanges-$600 shipped in US.

44mm dumptubes-$75 each

Tial MVR 44mm wastegate, purple, comes with all springs-$280 shipped in US.






FS: All parts are practically brand new and in perfect shape.

Edelbrock Victor X for b16, ported to 70mm at throttle body flange, black. $225 shipped in US.

RPM services 70mm throttle body with 3" wiggins clamp. Will come with charge pipe flange. $175 shipped in US.

Speedfactory 4bar map sensor-$75 shipped in US.

Mishimoto radiator, small dent near downpipe. Doesn't leak. $155 shipped in US.

Fullblown hanger with twin aeromotive 340 pumps. $400 shipped in US.

B series obd1 vtec distributor with 10.2mm plug wires. $85 shipped in US.

Carbon fiber eg hatch, excellent condition. $275 shipped in US.









P28 with Neptune rtp board plus boost hardware installed-$400 shipped in US.












D2 coil overs for eg/dc. Can either come with d2 springs all around with d2's default spring rates or can come with Eibach 1000# rear springs. $600 shipped in US with d2 springs. $650 shipped in US with 1000# springs($140 springs).

ASR 24mm rear sway bar. Made to use with ASR subframe brace but should fit other braces as long as they have the sway bar mounting points. Comes with adjustable end links($80 option). $200 shipped in US.

 

RC 750cc injectors part #SH4-750-SOLD
Hondata S300 V1 w/ bbg -SOLD
Performer X intake mani for B16-$180
Holset H1C turbo-$280

All parts are used but in good working order. Call or text 334-7six3-O927.
I can send pics of all.

 

Prices do not include shipping/paypal fees (unless otherwise noted)

MoTeC M4 box
M&W Pro14
Motec ignition expander
T1 cam trigger (Including one Golden Eagle cam gear with magnets)
CBR coils
Motec engine harness

$2750 (NOT SPLITTING UP)





Spoon "Gen 1" Kevlar spark plug wire cover for B series. Slight crack on one of the bolt tabs

$80 plus shipping





AN fuel line, for use in stock location (EG/DC/del Sol)
-Includes new fuel filter, all you need is fitting to connect to fuel rail (may have it, if you let me know which size you need)

$75 plus shipping




Tucked clutch line kit.
-Stainless braided, with black sleeve
-Fits B/D series in EG/EK/DC/del Sol

$55 shipped




Block plug, and (1) block port to -10an fitting for B series
-Brand new

$20 for block plug, $25 for for fitting. $40 for both



MSD cap for external coil for GSR

$40



Skunk2 ProSeries 70mm Throttle body for B/D/H
-brand new, only mocked up

$200 plus shipping





Recaro double lock slider
-Brand new

[b]$75 plus shipping[/b



BENEN 1st gen lower tie bar for eg/dc in black
-Great shape

$100 plus shipping



Custom dual back door intercooler.
-Good useable shape overall, has a few dings, but shouldn’t affect the flow

$250 plus shipping

 

First up is a ported GSR head with dual springs/TI retainers done by Bensons in 2004. $600









Complete stock GSR head in good condition. $300






3 GSR Gates timing belts in great shape. $20/ea. FBM dual pump hanger with (2) Walbro 255lph pumps. $300. M&W Pro 10 with Crane Fireball Coil (will not separate) $550.




(2) GSR Edlebrock IM's. One with screw in plug in place of freeze plug. Both come with stock TB's. $250/ea. B series to T bracket. $35. Golden Eagle headstuds. $90. (2) B/vtec solenoids. $30/ea. Aftermarket trans mount for B series/5 spd. $35






GSR Built Eagle Rods/CP Pistons block with block guard. $800








Valve cover with (4) -10 bungs welded. $40.

GSR Eagle rods with Arias pistons. Pistons nicked up on the underside. Skirts look good. Friend that had them wasn't sure because the shop took care of his engine setup, and I can't figure out what would cause it. No signs of bearing failure, and he wants me to sell them after he's been this long out the game, so $200.

 

AEM PN:30-1060 OBD II brand new never used $600obo


Skunk2 Racing B-series radiator hose kit like new $80

Skunk2 Racing billet vtec solenoid like new $80

MSD coil p/n8253 $80

Brand new Evolution Industries b-series light weight flywheel 11.5lbs $160

Used Moroso battery box only $75

Used Garrett T4 1.28 A/R housing for all GT42 and GTX42 $320

B-Series Moroso steel oil pan 4qt used $160

 

*Please Read Whole ADD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.

I hate to have to go in this direction but due to some changes in my life I have to get rid of one of my cars. So with that I decided to part out my drag car. I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.

Text or PM only 1 306 551 5139

- Race motor brand new never used - $3650 shipped (Does not come with valve cover $200 more for that) *WILL NOT PART OUT. SOLD AS A WHOLE*
Benson sleeved LS-vtec engine (sleeved prior to benson engraving the block)
84mm bore
GRP billet aluminum rods
Custom ross 11:1 pistons w/gas ports
JE custom wrist pins
O-ring'd block and reciever grooves in the head
SCE Copper head gasket
Moroso 5qt oil pan

JG cylinder head GSR
cnc'd
ferrea bronze guides
JG .5mm oversized flat face valves
JG valve springs and retainers
fresh valve job and surface
Highly polished front of cylinder head looks amazing
Brand new skunk2 pro 1 camshafts




- B series PAR Dog Box Gearset 2.9/2.0/1.4/1.09 With a 4.4 Final drive and cuff support maybe 10 passes with brand new M-Factory Diff installed in a re-endforced case - $4650shipped






Chase Bays CM1 Engine Harness - Honda/Acura B / D / H Series CHASSIS: 92-95 Civic | 94-01 Integra ECU/ECM: OBD1 INJECTORS: ID-2000 ALTERNATOR: OBD0/OBD1 IGNITION TYPE: OBD1 Distributor - $450 shipped



AIR Carbon Fiber intake manifold(Fits both gsr and b16 heads dual bolt pattern) - $900 Shipped
B series Carbon Fiber Valve Cover - $400 shipped



B series Oil Catch Can, Comes with valve cover, 4 lines(2 for head and 2 for block), and oil catch can - sold

Sprinwerks Slicks and Skinnies *WILL NOT SPLIT THESE UP DON'T ASK*
Fronts are 26x10x15 with bead lock(4x100 bolt pattern)
Rears Skinies are 25x4.5x15 (4x100 bolt pattern)
SOLD

Fuel System - 800 shipped
- 2x Bosch 044 with relays
- -8an Feed and return braided lines
- 5 gallon fuel cell




- Precision GT4294 journal bearing, 4" V-Band . Rated for up to 850hp, small chip in one fin *see picture* - $650 shipped plus paypal




- Garett 950hp Dual Back door intercooler(core size is 3.5"x12"x24") with 3" piping flanged for a tial 50mm BOV- The outlet piping on the front mount was squished a bit during shipping when I received it. This set up is used. - $490 shipped



- 4" Aluminum exhaust for EG Hatch, 3" vband with clams, one spot was cut for shipping purposes and will have to be re-welded or put a new vband clamp on it. There is a dent on the tip of the muffler from shipping. (please note the exhaust is not properly lined up for the picture - SOLD

- KOYO aluminum Rad with 12" mishimoto fan and hoses with Rad cap (ALL BRAND NEW) sold

- 2.5" steel cold side piping with clamps NO BOV
Front mount intercooler roughly 20"x9"x3" (made 475hp no problem) - SOLD

- AZ racing GSR Girdle - $80shipped


- Eg traction bar (garage built so not the nicest) - $100 shipped



- J's Racing CF air Duct for EG (passenger side) -$125 shipped


Sorry for not having my name in all the pics. I recently packaged everything up to move but can take better picks for people who are only seriously interested. The only different from the parts now compared to when I took these pics are they are now in packaging ready to ship.

 

Very nice EG hatch shell. Source 3 piece front end, 10 pt cage, low miles. Click on the link for the sales add.

http://hondamarketplace.com/showthread.php?t=3214224

 

I have some BNIB wiesco pistons for sale 85mm 13:1 comes with rings and wrist pins asking $350 for more picture or other questions it's best to text me at 702-808-6587





Also have some used JUN3 camshafts asking $650 or willing to trade for pro1 skunk2 cams

 

Zero Miles Built B20 $750 plus shipping or local pick up Baltimore, MD
85MM 13:1 JE Forged Pistons, Rev Forged Rods, Race Engineering Block Gaurd **SOLD**


4x100 13" Lenso Drag Wheel $350 shipped 48 states.


T1 Trigger B-Series bracket and sensor $125 shipped 48 states. **Sold**


Venom D16 HiFlow Fuel Rail $50 shipped 48 states.


OBD1 D series Alternator $50 Shipped 48 states


Acura 15" wheels with Yokohama Tires (20% Thread) $200 picked up Baltimore, MD


OBD1 9k Automatic Tach Gauge Cluster $50 shipped


MMR EF/CRX Fiberglass 1 Piece front end $200 picked up Baltimore, MD

 

Carbon CCC racing wing with DP racing brackets. Brackets alone were almost 300. Asking $350 for the wing and brackets. Ready to install.

Also have a carbon duckbill in great shape for eg. $130

 

For sale: All obo

Brand new in box Skunk 2 PRO 1 H22 cams $540

Hardly used H22 golden eagle cam gears $125

Brand new KS tuned updated timing belt tensioner. $100 paid 125

Located in Seattle, WA area

Pm me or text @ 3603050569

 

For Sale - Send me a PM if interested. I am Paypal verified:

GATO Intake Manifold - K-Series - SOLD!

Twin Bosch 044 Pump Setup - SOLD!

 

motec m84 brand new
m&w pro drag 4 brand new
$3k firm..buyer pays shipping
located southern california (805) 406-2037