June FS Thread
#1
HELLO,GOOD MORNIN'
Thread Starter
Join Date: Sep 2002
Location: Savin lives
Posts: 8,909
Likes: 0
Received 0 Likes
on
0 Posts
June FS Thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
#2
Re: June FS Thread
Custom fuel setup for sale. $700 obo.
Oem Sumped gas tank with 2 -10an outlets.
Aeromotive a1000 fuel pump with relay.
2 Aeromotive inline SS fuel filters(pre and post pump)
-10an steel braided feed line
Aem Fuel rail with fittings, matte black.
Just needs return line made, and FPR to be functional.
H22a Valvecover Powdercoated "shimmer candy purple" by Billy Hoang. With 4 -10an fittings for catch can setup. $150
Oem Sumped gas tank with 2 -10an outlets.
Aeromotive a1000 fuel pump with relay.
2 Aeromotive inline SS fuel filters(pre and post pump)
-10an steel braided feed line
Aem Fuel rail with fittings, matte black.
Just needs return line made, and FPR to be functional.
H22a Valvecover Powdercoated "shimmer candy purple" by Billy Hoang. With 4 -10an fittings for catch can setup. $150
Last edited by Johnny_Ek; 07-03-2013 at 11:49 AM.
#4
Honda-Tech Member
Re: June FS Thread
706-346-6024
matt.stover@comcast.net
MANLEY Turbo TUFF rods, B18a/b length - Used for 2 years(bolts are 1 year old, Race only, no street miles, Weights balanced: SOLD
BLOX EK Rear Lower Control Arms(Bushings replaced last year): SOLD
MSD Digital 6: $200 Shipped
MSD Blaster SS Coils: $30 Shipped EACH, $50 for Both
Aeromotive Pro Pump - Flows a shitload
$525
-Custom Forward Facing Turbo Manifold, Selling for someone else, test fitted on my car to show pictures. Fabricated by Joe Simpson at Tempest Racing.
-Friend purchased it and then shipped out to Japan in the USAF...
With 4" SS Downpipe
Flanged for 60mm Tial
$875.00 OBO!!
matt.stover@comcast.net
MANLEY Turbo TUFF rods, B18a/b length - Used for 2 years(bolts are 1 year old, Race only, no street miles, Weights balanced: SOLD
BLOX EK Rear Lower Control Arms(Bushings replaced last year): SOLD
MSD Digital 6: $200 Shipped
MSD Blaster SS Coils: $30 Shipped EACH, $50 for Both
Aeromotive Pro Pump - Flows a shitload
$525
-Custom Forward Facing Turbo Manifold, Selling for someone else, test fitted on my car to show pictures. Fabricated by Joe Simpson at Tempest Racing.
-Friend purchased it and then shipped out to Japan in the USAF...
With 4" SS Downpipe
Flanged for 60mm Tial
$875.00 OBO!!
Last edited by SPOOLINmatt; 06-14-2013 at 06:17 AM.
#5
Re: June FS Thread
72mm GT42R ball bearing 1.15A/R still usable needs new exhaust wheel or rebuilt $1200obo
AEM PN:30-1060 brand new never used $800
Skunk2 Racing B-series radiator hose kit like new $80
Skunk2 Racing billet vtec solenoid like new $80
MSD coil p/n8253 $80
Brand new Evolution Industries b-series light weight flywheel 11.5lbs $160
Used Moroso battery box only $75
Used Garrett T4 1.28 A/R housing for all GT42 and GTX42 $320
M&H 26x8.5x15 Slicks ONLY like new $275
AEM PN:30-1060 brand new never used $800
Skunk2 Racing B-series radiator hose kit like new $80
Skunk2 Racing billet vtec solenoid like new $80
MSD coil p/n8253 $80
Brand new Evolution Industries b-series light weight flywheel 11.5lbs $160
Used Moroso battery box only $75
Used Garrett T4 1.28 A/R housing for all GT42 and GTX42 $320
M&H 26x8.5x15 Slicks ONLY like new $275
Last edited by noluckracing; 06-22-2013 at 11:42 PM.
#6
Honda-Tech Member
iTrader: (2)
Join Date: Jan 2009
Posts: 1,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: June FS Thread
Aem coil on plug brand new just mounted! For B SERIES $650 shipped
Aem peak and hold injector box $150 shipped
Custom switch panel for dc2 $100 shipped
68mm pro products tb $125 shipped
Moroso black battery box $75 shipped
Moroso heavy duty kill switch $60 shipped
Aem peak and hold injector box $150 shipped
Custom switch panel for dc2 $100 shipped
68mm pro products tb $125 shipped
Moroso black battery box $75 shipped
Moroso heavy duty kill switch $60 shipped
Trending Topics
#8
Honda-Tech Member
iTrader: (3)
Join Date: Feb 2003
Location: wEsT of WattS...NoRth oF CompTon, CA
Posts: 4,946
Received 0 Likes
on
0 Posts
Re: June FS Thread
B16 OBD2 Distributor $150
B16 half shaft $50
B-Series Axles $75
OBD2 B-SERIES Alternator $50
T1 Breather Kit $425(Comes w/ lines filters, hoses, valve cover and fittings for block)-SOLD
BLOX Coilovers $500 (installed, car never moved) EF, EG, EK, DC2-SOLD
B-Series Rear T-Bracket $25-SOLD
ACT 6 puck disk and HD pressure plate $200-SOLD
All prices do not include shipping or pay pal fees.
PLEASE TEXT OR CALL 424-230-650THREE for more info.
B16 half shaft $50
B-Series Axles $75
OBD2 B-SERIES Alternator $50
T1 Breather Kit $425(Comes w/ lines filters, hoses, valve cover and fittings for block)-SOLD
BLOX Coilovers $500 (installed, car never moved) EF, EG, EK, DC2-SOLD
B-Series Rear T-Bracket $25-SOLD
ACT 6 puck disk and HD pressure plate $200-SOLD
All prices do not include shipping or pay pal fees.
PLEASE TEXT OR CALL 424-230-650THREE for more info.
Last edited by f@sth@tch89; 06-17-2013 at 07:53 PM.
#10
Honda-Tech Member
Re: June FS Thread
FS/FT Competition V2 13x8 Race Wheels w/ 24.5x9-13 M/T Slicks
Price: $550.00 OBO + Shipping and PayPal Fees (If Applicable)
Willing to Trade for a pair of ET Street Radials and Wheels or a Set of Street Tires and Wheels.
**OPEN TO REASONABLE OFFERS**
Price: $550.00 OBO + Shipping and PayPal Fees (If Applicable)
Willing to Trade for a pair of ET Street Radials and Wheels or a Set of Street Tires and Wheels.
**OPEN TO REASONABLE OFFERS**
#11
Honda-Tech Member
iTrader: (2)
Join Date: Aug 2008
Location: Concord, NH, united states
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: June FS Thread
Last October I had a daughter and this summer I realized my priorities and goals in life have changed. I have owned the car for 10 years and it been a project since. It has a weld in ten point cage, Lighter/Faster sunroof plug, VIS carbon fiber hood, ETD tracking bar, Skunk2 drag coilovers, sumped tank, and relocated battery. It has the factory dash, door panels and head liner. It doesn't have seat, heat or a/c behind dash, gauge cluster or steering wheel. Asking $1000. I check my pm's often or you can text me at (603) 724 0164. Bobby
#12
Re: June FS Thread
EVERYTHING OBO
I want a K-series instead, is the reason why I'm selling.
*Pictures all at bottom of thread*
Precisionfab B-series/EK T4/44mm vband forward facing manifold
(comes with stainless studs/nuts/gasket)
- $850 shipped
Turbonetics T4 62-1 (62mm compressor, 65mm turbine/.81 ar)
Polished compressor housing
(comes with oil feed and drain flanges. 4an feed, 10an drain)
*still fresh from rebuild @turbonetics, and only seen ~30minutes of idle time*
- $600 shipped
Five-o motorsport 1600cc high impedance injectors/B-series hats
(comes with T1race obd2b to uscar adapters)
*only seen ~30minutes of idle time/pumpgas*
- $450 shipped
Tial silver 44mm wastegate/11psi spring
(comes with clamps, fire ring, and black precision air fittings)
*is used, obviously*
- $220 shipped
Tial black 50mm blow off valve
(comes with clamp, stainless flange, and o-ring)
*is used, but looks very new*
- $160 shipped
Bosch 044 fuel pump
(comes with both fittings/6an in and out, and a mount)
*New, with scuffs and only seen ~30minutes of idle time*
- $180 shipped
MSD digitial 6 plus/HVC 2 coil
(coil comes with mounts, all wiring is there)
*used and works*
- $400 shipped
*Manifold prepaint*
I want a K-series instead, is the reason why I'm selling.
*Pictures all at bottom of thread*
Precisionfab B-series/EK T4/44mm vband forward facing manifold
(comes with stainless studs/nuts/gasket)
- $850 shipped
Turbonetics T4 62-1 (62mm compressor, 65mm turbine/.81 ar)
Polished compressor housing
(comes with oil feed and drain flanges. 4an feed, 10an drain)
*still fresh from rebuild @turbonetics, and only seen ~30minutes of idle time*
- $600 shipped
Five-o motorsport 1600cc high impedance injectors/B-series hats
(comes with T1race obd2b to uscar adapters)
*only seen ~30minutes of idle time/pumpgas*
- $450 shipped
Tial silver 44mm wastegate/11psi spring
(comes with clamps, fire ring, and black precision air fittings)
*is used, obviously*
- $220 shipped
Tial black 50mm blow off valve
(comes with clamp, stainless flange, and o-ring)
*is used, but looks very new*
- $160 shipped
Bosch 044 fuel pump
(comes with both fittings/6an in and out, and a mount)
*New, with scuffs and only seen ~30minutes of idle time*
- $180 shipped
MSD digitial 6 plus/HVC 2 coil
(coil comes with mounts, all wiring is there)
*used and works*
- $400 shipped
*Manifold prepaint*
#13
Re: June FS Thread
Mfactory B16/ITR 4.0 Pro final drive with WPC treatment. Brand new. $600.00 shipped.
OEM GSR differential, good working condition and bearings. $75.00 shipped.
Cusco clutch pack k series differential. Used, but in good condition. Has approximately 2,000 miles since installed. $700.00 shipped.
AEM 4 channel wideband controller. Used for dyno testing, in new condition. $350.00 shipped.
AEM High Output Inductive smart coils. (4) brand new $200.00 shipped. (4) used with pigtail harnesses, in like new condition $150.00 shipped.
AEM AQ1 logger with short harness. $175.00 shipped.
Skunk2 Pro 1 cams, sold!
Skunk2 Pro 2 cams, brand new in boxes never opened. $550.00 shipped.
Skunk2 /Gram 1000cc b series fuel injectors. Brand new. $350.00
K20a2 cylinder head (PRB). Good condition. No cams/gears. Comes with valve cover not pictured. $600.00 shipped.
08' Civic Si 1-4th gear set, ring/pinion and countershaft. In good condition, syncros look to be in good shape. $400.00 shipped.
All prices firm, and included shipping within the 48 states. Further questions please PM or email tech@evans-tuning.com.
OEM GSR differential, good working condition and bearings. $75.00 shipped.
Cusco clutch pack k series differential. Used, but in good condition. Has approximately 2,000 miles since installed. $700.00 shipped.
AEM 4 channel wideband controller. Used for dyno testing, in new condition. $350.00 shipped.
AEM High Output Inductive smart coils. (4) brand new $200.00 shipped. (4) used with pigtail harnesses, in like new condition $150.00 shipped.
AEM AQ1 logger with short harness. $175.00 shipped.
Skunk2 Pro 1 cams, sold!
Skunk2 Pro 2 cams, brand new in boxes never opened. $550.00 shipped.
Skunk2 /Gram 1000cc b series fuel injectors. Brand new. $350.00
K20a2 cylinder head (PRB). Good condition. No cams/gears. Comes with valve cover not pictured. $600.00 shipped.
08' Civic Si 1-4th gear set, ring/pinion and countershaft. In good condition, syncros look to be in good shape. $400.00 shipped.
All prices firm, and included shipping within the 48 states. Further questions please PM or email tech@evans-tuning.com.
Last edited by boosted hybrid; 06-02-2013 at 05:11 AM.
#14
Honda-Tech Member
Re: June FS Thread
For Sale:
Web Camshaft Custom grind cams for B Series Vtec. Same cams i ran last season that went 8.8@176 good for 1000hp and 11k rpm. Will require newer style LMA's(beehive spring) and proper valvtrain. Over .480\.470 lift. $700
C02 Bottle with regulator and roll bar mount- $125
Blox Rear LCA for Ek- $70
Fidanza Aluminum Flywheel for b series- $80
3.5 Aluminum exhaust with vibrant race muffler all v bands $300 local pick up
All prices do not include shipping or paypal fees.
PM or Email Juice2435@aol.com
Web Camshaft Custom grind cams for B Series Vtec. Same cams i ran last season that went 8.8@176 good for 1000hp and 11k rpm. Will require newer style LMA's(beehive spring) and proper valvtrain. Over .480\.470 lift. $700
C02 Bottle with regulator and roll bar mount- $125
Blox Rear LCA for Ek- $70
Fidanza Aluminum Flywheel for b series- $80
3.5 Aluminum exhaust with vibrant race muffler all v bands $300 local pick up
All prices do not include shipping or paypal fees.
PM or Email Juice2435@aol.com
#16
Honda-Tech Member
iTrader: (4)
Join Date: Dec 2004
Location: Bellevue/NE, Dallas/TX, USA
Posts: 4,344
Likes: 0
Received 1 Like
on
1 Post
FS: New Skunk2 Pro Series Stage 3 Camshafts B Serie.
As Title States. $550 Ship'd Or Best Offer. Will Entertain Trades + Cash as well.
VIA Text 402-201-7009 Names Brickner. www.Facebook.com/BricknerFTW
Bellevue (Omaha) Nebraska 68147
I have a Pair of Brand New 2011+ Skunk2 Pro Series Stage 3 B Series Camshafts. Intake Camshaft is still in the Box never opened. Exhaust Camshaft was taken out for Picture. These Retail for almost $700.
http://passwordjdm.com/Skunk2-B-Seri...7571C2198.aspx
Here is Skunk2's Markings ID Thread.
https://honda-tech.com/forums/all-motor-naturally-aspirated-44/new-skunk2-camshaft-markings-2957692/
VIA Text 402-201-7009 Names Brickner. www.Facebook.com/BricknerFTW
Bellevue (Omaha) Nebraska 68147
I have a Pair of Brand New 2011+ Skunk2 Pro Series Stage 3 B Series Camshafts. Intake Camshaft is still in the Box never opened. Exhaust Camshaft was taken out for Picture. These Retail for almost $700.
http://passwordjdm.com/Skunk2-B-Seri...7571C2198.aspx
Here is Skunk2's Markings ID Thread.
https://honda-tech.com/forums/all-motor-naturally-aspirated-44/new-skunk2-camshaft-markings-2957692/
#19
Honda-Tech Member
Re: June FS Thread
Xenocron H22 Cam degree kit - $250 shipped
-Hole on degree wheel is a little ovaled, no problem.
-complete with three dial indicators, check springs, bb's etc.
-Can be used with B series and K series, just need head fixture from Xenocron
Kaizenspeed H22 Tensioner - $100 shipped
-Can include OEM Arm, sleeve and bolt for Extra $20.
H22 OBD1 Internal Coil Distributor - $100 shipped
-Used, comes with a little extra wire to splice if need to.
H22 Ngk spark plug wires - $40 shipped
-New never used
Aftermarket H22 water pump - $25 shipped
-New never used
QSD Clutch Master cylinder firewall bracket - $30 shipped
-New never used
S2000 f20c crank pulley - $50 shipped
-smaller one in picture
-great for H2B swaps
K24 Crank pulley - $25 shipped
-bigger one in picture
-great for H2B swaps.
-Hole on degree wheel is a little ovaled, no problem.
-complete with three dial indicators, check springs, bb's etc.
-Can be used with B series and K series, just need head fixture from Xenocron
Kaizenspeed H22 Tensioner - $100 shipped
-Can include OEM Arm, sleeve and bolt for Extra $20.
H22 OBD1 Internal Coil Distributor - $100 shipped
-Used, comes with a little extra wire to splice if need to.
H22 Ngk spark plug wires - $40 shipped
-New never used
Aftermarket H22 water pump - $25 shipped
-New never used
QSD Clutch Master cylinder firewall bracket - $30 shipped
-New never used
S2000 f20c crank pulley - $50 shipped
-smaller one in picture
-great for H2B swaps
K24 Crank pulley - $25 shipped
-bigger one in picture
-great for H2B swaps.
#20
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2009
Location: central pa
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: June FS Thread
fs: skunk2 pro3 cams, Brand new in box, took out to check and take pics. 450obo
H22 brand new wiseco with locks, wrist pins, and all rings. 89mm bore, 11.5:1cr 450obo
contact me at 814 937 1234
H22 brand new wiseco with locks, wrist pins, and all rings. 89mm bore, 11.5:1cr 450obo
contact me at 814 937 1234
Last edited by h2b eg; 06-07-2013 at 01:21 PM.
#21
Honda-Tech Member
Join Date: Jul 2002
Location: Upper Marlboro, MD, USA
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Re: June FS Thread
Z10 wet sump oil system ( complete ) $1000 obo
Ring gap file ( electric ) $75 obo (SOLD)
1200 hp air / water intercooler $500 obo ( 5 gallon cell, pump, lines not included ) if interested I can send pics and discuss pricing at that time.
STR cam gears $50 obo
MSD 7531 $450 Also have HVC coil. $65
NLR AMS-1000 with CO2 bottle and regulator..$675 obo
Auto Rod switch panel $ 125
Ring gap file ( electric ) $75 obo (SOLD)
1200 hp air / water intercooler $500 obo ( 5 gallon cell, pump, lines not included ) if interested I can send pics and discuss pricing at that time.
STR cam gears $50 obo
MSD 7531 $450 Also have HVC coil. $65
NLR AMS-1000 with CO2 bottle and regulator..$675 obo
Auto Rod switch panel $ 125
Last edited by bottlefedintegra; 06-12-2013 at 11:09 AM. Reason: new item
#22
Honda-Tech Member
Join Date: Mar 2003
Location: San Antonio, Texas, USA
Posts: 945
Likes: 0
Received 0 Likes
on
0 Posts
Re: June FS Thread
A2W setup Bell intercooler core, water box that fits in EK engine bay with internal Rule water pump and -20 lines. It is already coated with an anti-condensation coating that way it does not sweat. $550.00
#23
Honda-Tech Member
iTrader: (1)
Join Date: May 2008
Location: san antonio, tx, bexar
Posts: 1,230
Likes: 0
Received 0 Likes
on
0 Posts
Re: June FS Thread
S2k drag manifold two 44mm twin scroll t4 flange paid 1200 asking 700 plus shipping 210-214-8542
This is from FullBlown and is brand new never used.
This is from FullBlown and is brand new never used.
#24
Honda-Tech Member
Join Date: Apr 2008
Location: turbo land
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: June FS Thread
B16 head full skunk 2 head package $600
Skunk 2tuner 1 cams $350
Afi turbo b16/typer intake manifold flanged for mustang 76mm throttle body $850
Edelbrock 76mm throttle body / tps $220
Aem cam gears $170
Ati fuldi damper street pulley $320
Custom b series top mount t3 &44mm waste gate flange $750 Obo
Execdy twin disc $800 Obo
Gsr tranny wave trac LSD tranny needs sliders $500 Obo basically sellin LSD
Hondata s300 /w boost by gear option $500
Full blown Xxl fuel rail $120
B18a1 A.E.B. sleeved block & O-ringed 81mm bore golden eagle main studs z10 block girdle type-r oil pump type-r water pump $1050
Innovative eg/dc motor mounts plus two solid torque mounts with brackets $250
B -series dc2 back brAcket $50
Black steel braided with clutch line with banjo end and clutch slave $60
Golden eagle GS-r head studs torqued once $130
Moroso b series oil pan $100
Golden eagle sandwich plate wit Ls -v line & fittin for head $85
Skunk 2tuner 1 cams $350
Afi turbo b16/typer intake manifold flanged for mustang 76mm throttle body $850
Edelbrock 76mm throttle body / tps $220
Aem cam gears $170
Ati fuldi damper street pulley $320
Custom b series top mount t3 &44mm waste gate flange $750 Obo
Execdy twin disc $800 Obo
Gsr tranny wave trac LSD tranny needs sliders $500 Obo basically sellin LSD
Hondata s300 /w boost by gear option $500
Full blown Xxl fuel rail $120
B18a1 A.E.B. sleeved block & O-ringed 81mm bore golden eagle main studs z10 block girdle type-r oil pump type-r water pump $1050
Innovative eg/dc motor mounts plus two solid torque mounts with brackets $250
B -series dc2 back brAcket $50
Black steel braided with clutch line with banjo end and clutch slave $60
Golden eagle GS-r head studs torqued once $130
Moroso b series oil pan $100
Golden eagle sandwich plate wit Ls -v line & fittin for head $85