Few things for sale, you can easily contact me with my phone or PM, my number is 305 three21 5376

All items are in good working condition. If you need more photos, please just ask. All items are MINUS shipping and paypal unless rather wise stated.


AEM EMS for a 2000-2005 S2000 30-1052U Price: Sold!!!!!

REAL SMSP header for B-series Price: $800
This header was built by dave from SMSP for a customer. It was built for a 2.0 litre, but will work well on other setups. This header is proven to make more power and powerband then most to all headers out there. This will make more power then any china header. You normally have to wait MONTHS for this header, but you can buy it now! No dents!




Brian Crower stage 2 cams Price: $400 shipped!
These cams are NEW in the box. The customer was building a NA street car, but built a stock motor boosted car instead. They are great for all motor OR boost. We have seen gains of 30+ over stock cams on boosted setups. They are $500 new!!!




Zex nitrous kit Price: $200
Customer was building a NA car with spray, but went boost. It comes with everything in the pic, and is in working condition.

 

H22 2.6L Drag Cartel Stroker Kit, ready for installation. Sells as a kit ONLY. Includes:
-102mm Billet Crank, 50mm Mains. MADE IN USA!!!
-Saenz Ultra Rods
-JE 90mm Pistons with fresh Calico Coated Tops and Skirts
-New JE Rings
-New Calico Coated ACL Bearing Set

$2500 shipped.

H22 62mm Kinsler ITB Brand New, Never Used, Never Tested PENDING

New H22 Ferrea Competition Plus Valve Set $275 shipped.

Paypal fees not included.

 

I have a set of M&H rear skinnies 3.6-24-15 Sold to EJ1 ex

One lenso polished XPD rear wheel the other one was damaged $160 Shipped for the wheel.

Precision 1600cc injectors $250 Shipped

Stock GSR crankshaft in great condition $175 Shipped

FJO injector driver $75 Shipped

Turbo XS Standard boost controller $40 Shipped

You can also contact me at 318-564-1046 Thanks,

Buyer will included 3% paypal fees if using paypal.

 

everything i have is new in box prices dont include s/h or paypal fees s2000 f20 pauter rods $700 s2000 cp pistons 20 over 11:1 with coating $400 s2000 supertech block guard $100

 

Garrett GT42 Turbine Housing 1.01 A/R $250 OBO


Spearco 24 x 12 x 3 Intercooler Core, No Tanks, Good For 600HP $200 OBO


Supertech K Series Valvetrain $350 OBO


AFI B Series Ramhorn T3 Turbo Flange, 44mm V Band Wastegate Flange $695 OBO


AFI K24 Only Bottom Mount, T3 Turbo Flange, 44mm V Band Wastegate Flange $695 OBO


TD Autowerkes Head Studs, K Series & B Series $149


Bosch 044 Fuel Pumps $225


Need more info:

TD Autowerkes
12154 SW 114 PL
Miami Fl 33186
786 293 8876
tdacarlos@yahoo.com

 

FS: Brand new Bullseye power S372R turbo. $1,000. T4 divided, 1.10A/R. Polished compressor housing, coated exhaust housing. 831 359 0477, Surge

 

All parts are Brand New Never Used

Serious Buyers only. Total spent on this build is $15,753.

Buyer pays actual shipping cost.

SOLD ITEMS
ID 1000’s 2slowGs-R
Hondata CheLude NY
Wideband CheLude NY
4 bar MAP CheLude NY
Tuner View 0487erasmo
Edelbrock Intake, 70mm TB AEM Fuel Rail - DCMATT
Transmission Sold Locally
Turbo/manifold/DP Wastegate- Teggietuner

Cash, PP Gift or you Pay the PP fee’s 3%

Long Block with turbo setup $7000
Short Block $4000

Motor is a B18C Built by ERL Performance
-Manley H-beam Rods
-Wiesco Coated Skirt 9.0:1 Pistons
-ERL Superdeck Sleeves
-ARP Headstuds
-ARP mainstuds
-Moroso 5 qt pan with bungs for turbo drain and temp sensor
- 2 10AN Fittings for Breather Setup
Oil Pump, Oil Pickup, Water Pump Timing belt. New Bolts used throughout whole engine. New water pipes, thermostat housing, all new gaskets seals All OEM Honda parts comes with Mounts, Brackets, Alternator

$1500
Cylinder Head- Integra Type R head
-Integra Type R Camshafts
-M factory Camgears
-Supertech Valvesprings and Titanium retainers
-Supertech nitride coated valves
- New valve seals, Cam cap bolts, valve guides, LMA cam seals all brand new OEM Honda

$650
Custom Dual Backdoor Intercooler Precision Core 850 HP 2.5 in and out Side brackets for easy mounting Core Measurements 24 x 3.5 x 12.5 Overall width end tank to end tank 34.5”

$50 OEM Honda Mirror Block Off Plates for EG

$50 Box full of OBDI and OBDII Connectors used for making new Harness. enough to make a few harnesses

 

Exospees front end sold local.

 

Selling a H22 Forward Facing T3 turbo manifold. Manifold is brand new and was build for an eg chassis but may fit others. It has a flange for a 44mm wastegate.

$950obo plus shipping

 

Vehicle: 1999 Honda Civic EX drag roller

Miles: DNA

Price: 7500 obo

Title Status: clean

Location: Miami

Contact: pm, email racelab@att.net, or call us (305) 251-1995

Vehicle Description: This is a clean rolling shell ready for a K series powered TrueStreet/SFWD/Outlaw drag car. Perfect for anyone looking to save time and money but still have quality.

Photos: Included:
- Exospeed 3pc front end
- Carbon fiber hood
- Carbon fiber trunk
- Hasport EKK2 solid mounts with EG subframe
- Blox drag coilovers
- Blox rear LCA
- Rear wheel speed sensor
- 10pt chromoly cage by Racecar Builders
- Sumped fuel tank
- Stroud parachute
- Custom bumper mount battery box with XS power s925 battery
- Skunk2 front and rear camber arms
- Ktuned traction bar
- Solid-state power cutoff switch
- Ktuned 5th gear lockout
- Ktuned billet shifter arm
- Kens Custom brake booster delete
- Tilton flow control valve
- AEM UEGO digital wideband
- Autometer boost and oil pressure gauges
- Autometer pencil shift light
- Aluminum radiator
- Spal 13" hight performance fan
- 99 Civic SI gauge cluster
- New front LCA bushings
- K series adapter harness
- K series shifter box and cables

Optional items at additional cost:
- Garret 24x12x4.5 intercooler with ATP cast endtanks
- DSS Level 5.9 axles with intermediate bar
- Wavetrac LSD
- MT 24.5x9x13 drag slicks on 13x8 V2 drag rims and 25x4.5 MT ET fronts on 15x4 Spinwerks skinnies
- Existing 900+whp 67mm turbo kit

*** Car does not have seats


















Video:



This was its very first pass down the 1/4 mile with about 150-175whp less than max
RaceLab's Civic Coupe 9.7 @ 161 - YouTube

 

Innovative solid motor mounts, Used for a some dyno pulls and 2 races mint with minor scuffs $250 shipped SOLD
CNC 402 staging brake brand new, never used or installed.$150 shipped SOLD !!!
Earls 6 an fuel filter used $20
4x12 intercooler end tanks $60 each
4x12x35 intercooler new $160 shipped
competition engineering sump $55 shipped
custom made aluminum dash without the gauges $125 shipped
Summit racing 5 gallon fuel cell 4 $110 shipped
Kirkey racing seat with driver bracket and cover for eg civic. $150 shipped
Momo steering wheel with Momo EG hub. $85 shipped spot on the wheel is grease not a hole.

Autometer 4798 carbon fiber in dash tach, 3 3/4" low use $100 shipped
Autometer 4849 Carbon fiber in dash Speedo, 3 3/4" installed never calibrated $170 shipped
Autometer 4791 volt gauge 2 1/16 $40 shipped
Autometer 3310 fuel level gauge new never used $90 shipped


gauge bezel rings, fits the above gauges for custom dash panels, looks really nice. $20 each

takes only paypal
lindsay_leroy@yahoo.com

 

Looking to sell my race car, i finished building this thing and got into playing pool, the car has been sitting for about 9 months. The car only has 5 passes on it and 3 dyno sessions at Do-It- Dyno.

Brief descripition:
GSR Block Golden Eagle Sleeved 83mm
Manley Turbo Tuff Rods
CP Pistons
GSR Head, Supertech valves, valve springs, and retainers, ctr intake cam itr exhaust
SLS ( straight line specialties ) top mount manifold w/ 4 inch downpipe and 2 44mm w/g flange
Garrett GT40R with 1.06 hotside
Tilton twin disk kit with master and bearing kit
PARR Gearset w/ Quaife LSD
DSS 5.9 Axles
Weldon Fuel Pump, filters and FPR, 1600cc injectors
Steen Chassis Cage
Custom harness made for engine bay with hondata s300
All Vacuum lines are steel braided w/ fitting, Intercooler pipes have boost braces on them

Asking price $20,000
For serious buyers PM for more info and pix
or call Alex (818) 279-5202

 

$950 shipped! AEM EMS Series 1 30-1040U ecu for OBD-1. Comes with software, cable, wire harness for wide band and wide band O2 UEGO sensor. Was gone through by AEM to make sure is working 100%.

 

Kens Kustom wheelie/traction bars unused


cms racing spindle mount 15x4 make offer



P29 pistons and rings 100


900 FIRM!
**items for sale do not include shipping or pay pal fees**



EK subframe mount/EK bumper free- pick up only, or meet me at the track

 

im parting out a friends car for him...if u have any questions or intrested in any of the parts contact me at 305 281 6495..everything needs to sell ASAP

hondata s300 $550
skunk2 pro1 cams/crower cam gears 550
built gsr head skunk 2 valvetrain and ferrera valves type r valve cover $750
edelbrock manifold and throttle body 320
id2000cc injectors 600... might need cleaning due to the car sitting for a while

Fabworx forward facing turbo kit 3200
pt jb T4 6765 .81ar
tial BOV
precision wastegate
Fabworx intercooler
all the oil lines and clamps etc
map sensor
dump tube
downpipe

96 ek white hatch converted to 2000...3500 obo
ctr mirrors $200
carbon fiber hood
ctr head lights $300
si cluster
s2000 seats $350
function form suspension $500
hasport racing mounts
Gsr suspension all around
ctr wing
s2000 steering wheel
aem wide band
everything above will sell with the car but if u wana buy it aside from the shell the price is listed for them [/B]

Photos:

 

Selling my TVII, used it a bit with my hondata s300. My ecu pooped itself so I ran crome for a lil bit. Now on hondata s200 which it's not compatible with . So I must sell as it is currently useless. 130shipped! Purchased earlier in the year. If you want the surround deal I made, it is avail for purchase. Made for 60mm gauges. Or if you want to buy the whole setup as is with shiftlight and gauges. $450 shipped OBO. Gauges are HKS Oil pressure and water temp. They are mechanical gauges.

data cable and usb cable is included

 

parting out my brother TS car. going rwd. car still is completely together and running if anyone is interested in buying the whole car

any questions call or text 954-907-0520

EVERYTHING IS BASICLLY BRAND NEW. HAS ONE DYNO SESSION! MOTOR MADE 800 ON 27 LBS!

ENGINE

SHORTBLOCK---- 3000

AEBS B18C5 BLOCK
CUSTOM CP PISTONS 11:3:1
UPGRADED WRIST PINS
MANLEY TURBOTUFF RODS
BALANCED LS CRANK
ARP STUDS
ATI DAMPER
ALL MACHINE WORK DONE BY TEC IN RIVERA BEACH

CYLINDER HEAD

B18C1 P72 HEAD SUPERTECH COMPLETE VALVETRAIN- 600
POLISHED VALVE COVER $75
SKUNK2 PRO1 CAMS $450

GOLDEN EAGLE INTAKE MANIFOLD-550
EDELBROCK 75MM THROTTLE BODY-200

T1 STYLE CATCH CAN WITH LINES AND FITTINGS $250

AVID RACING SOLID MOUNTS $225

CX RACING RADIATOR IN MINT CONDITION $75
--------------------------------------------------
TRANSMISSION

B18C JDM GSR TRANS.-450
TILTON TWIN DISC WITH 7 LB FLYWHEEL-1000
QUAIFE LSD-600

TURBO KIT

CUSTOM TOP MOUNT MANIFOLD- 600
T4 62/62 PRECISION TURBO. .81 REAR-650
2 TIAL MVS RED WASTEGATES- 220 EACH
3 INCH PIPING BACKDOOR WITH BIG 4.5” –INTERCOOLER (FOR EG) 600
TIAL BOV- 150
3 INCH DOWNPIPE- 100

FUEL

2200 HIGH IMPEDEANCE BOSCH INJECTOR- 650
TWIN BOSCH 044 PUMPS WITH BRACKET AND ALL LINES AND FILTERS. FROM SUMP TO FUEL RAIL- 550
AEROMOTIVE REGULATOR $100

SHELL-5,500
94 CIVIC HATCHBACK
CUSTOM 10PT CHROMOLY CAGE
JOJO CALLOS CARBON FIBER 3 PIECE FRONT
SIEBON CARBON FIBER DOORS
CUSTOM DRAG WING
KIRKEY ALUMINUM SEATS (2)
SPARCO STEERING WHEEL
STROUD PARACHUTE ALL SETUP
STROUD WINDOW NET
GFORCE HARNESS
SWITCH PANEL (START,IGNITION,FUEL,FAN)
JDM CLUSTER
CNC STAGING BRAKE
SUMPED TANK
WHEELS-
STANCE MINDSETS ON 275-50-15 MT RADIALS WITH ONLY 10 DYNO PULLS 195-15’S ON THE REAR-850

SLICKS- EXOSPEED (LENSOS) ON 24.5” MT SLICKS- 450


ELECTRONICS

HONDATA S300 WITH BOOST CONTR. $550

AEM WIDEBAND $125

MSD 6AL WITH BLASTER COIL $150

OEM DIZZY $150

BLUE NGK WIRES $40

AEM 5 BAR MAP SENSOR $80

FAL FAN $150







i'll get more pics up later today

 

PAYPAL ACCEPTED / WILLING TO SHIP / MOTIVATED SELLER.
520-256-4542
STEVE


FULL-RACE A/C RAMHORN , (b series only), 7.5k miles on it.
Vband 44m w/g
WORKS WITH A/C
600$


Garrett 60-1 stage 3, 4 bolt .63/ .70
4.5k miles on it. Made 450hp @ 16psi on 100 octane by Locash Racing
Few track passes but mosty shelf life
0 shaft play.
0 smoke issues.
No oil flanges included.
T3
No stripped bolts bs

400$

Inch racing / tsr downpipe.
4 bolt for garrett, idk if it will work on your turbo thats your job to find out
Half is full stainless welded by tsr aaron
Other half is mild stainless welded by inch
It was with this setup, its not ac compat
Full 3 inch
Paid 250$ easily in materials and labor.

Asking 125$
Will include DP FOR FREE IF BOTH MANI/TURBO are sold to the same buyer.















DSM obd-1 440's
75$
Already modified for honda clips






RC1000'S obd1
they have about 5-600 miles on them. i installed them, tuned, few races etc.
switching to ID 1000's, so no longer need these ones.
require a resistor box, or one to be wired in.
i paid 96$ per injector without shipping.
do the math, add the 1 carry the 2 and you get......

300$ w/ resistor box included.







PAID 250$ asking 150$
Bought this from locash racing a few months back.
Obd1 chipped p28. Came with a neptune map.
Went high 12's on my untuned N/a LSV.

I went boost and removed the chip.
In its place i put a crome gold chip.
Mild tune, 8psi, w/ bosch 550's. Ls/v.
2step anti lag etc
this ecu IS NEPTUNE/HONDATA ready.






chip in:




chip out:






JHPusa battery tray for slim odyssey battery 25$

exedy stage 1 stock replacment clutch.
small spline cable trans also, idk if will fit others.
used for dyno only, then that was it. no throwout bearing included.
good for 300hp, thats what we made, then pulled the same day for a CC twin disc
100$

 

The drag Car never saw the track so most of these pieces have been on the car only for start up. All of the pieces are located in St.louis (Cottleville to be exact) mo 63304. I am willing to ship at new owner’s expense. All prices are obo and I will negotiate if of items are purchased together.



The ef civic shell – what it will come with is a good title, walbro 255lph fuel pump, rear disc swap already on, front integra knuckles and brakes with new wheel bearings, extended studs up front, a traction bar kit, front shocks with h &r lowering springs ill even throw in the rears, rear aluminum lower control arms, a passenger seat, fenders, hood, and anything else I can find that belongs with the car. Now the car will take some work to get it back if you wanted to get it street legal as in the front core support put back in and headlight buckets but as with any project anything is doable does not have wheels you will need to bring some. 700$ obo



b series side exit header 4-2-1. This header is loud and the only words to describe it are amazing. no you cannot use it on the street. Comes with o2 sensor 600$ obo



Full complete drag car harness. Here is the thread where stole made the harness http://stlhondas.com/forums/showthread.php?t=23850 There is no fluff with this harness just the necessities. All coupled to a Moroso switch panel with push button start. Comes with relays and all just hook up to the engine, a fuel source, and a positive battery connection and it is good to go. 450$



Fiberglass one piece front end for ef. No brackets no nothing 500$ obo

 

Price: 750 Shipped OBO

Up for sale is the suspension off of my drag Integra. These were used for about 1500 miles with the stock springs (12kF/8kR) and then another 870 miles with the eibach upgraded springs (20kR/14kF). Suspension is in excellent shape and at $750 shipped thats a steal. I paid $1000 for the coilovers and another $275 for the upgraded springs.

706-577-3364 Ray

 

For Sale:

Brand new set of std. size (81.00mm) Honda OEM Piston Rings.

I bought these along with some other engine parts from a dealership and since then I found out I will be going oversize on my pistons. The stealership I bought them from would not take them back after 10days from purchase.

So I am looking for $110shipped!

email: vtecintegra9 at hotmail dot com or send me a PM (slower response from me)

 

FS 3.5 Aluminum exhaust with Vibrant Race muffler V band on both ends. Was on a ek hatch will prob fit other models as well. Perfect for a street turbo or all motor setup very light weight. $450 or Bo prefer local pick up but willing to meet up

PM For pics

 

P72-2 GSR head $350 (no dizzy)
Greddy electronic boost controller $150
Hondata s200 $200
84mm JE 9.2:1 Pistons $475
Block guard $50
Cometic 84mm LS/Vtec head gasket $80
Greddy TD04 & log manifold $400 (Made 226whp on 10lbs, great daily turbo setup)
T4 Forward Facing Manifold $700 (Trade for undivided t3 top mount)
PT6768BB Turbo $1500

9034867114 Dustin for info/pics

 

450 plus shipping!

Description: Aluminum Spinwerkes drag racing wheels. Were on my race car for approximately 10 passes. Awesome condition, very light. Bolt Pattern: 4x100 15x10 6inch back space. Approximately 10lbs each. Drilled for rim screws

CNC sun 6061-T6 rim, ultra lightweight, and offers maximum strength and minimum run out
Forged 6061-T6 cnc machined centers, offering maxmum strength
360 degree precision welded two piece contruction
Superior hand craftmanship
Classic spinwerkes racing 10 spoke design
Engineered for professional competition


Pictures:

 

Email -- James@IPGParts.com
Phone -- 407-324-4684

We have an enormous amount of awesome used Drag Racing Parts available

way too much to post here

here is a Text Only List that we generated to start with -- http://www.ipgparts.net/blog/general...learing-house/

and here are some of the great highlight parts

-- Mark Williams Axle Kit for 92-00 Civic, 94-01 Integra (Spindle, Brakes, Axles, Intermediate Shaft) — $2800

-- MB Racing Fiberglass Doors for 92-95 Honda Civic (includes lexan, latches, etc) — $600/pair

-- Nuformz Rear Spindle Mount Suspension with Strange Coilovers for 92-00 Civic, 94-01 Integra — $1800

-- Bogart Wheel for Nuformz Rear Spindle Mount Suspension Setup — $750

-- Penske Front Coilover for 92-00 Civic, 94-01 Integra, Remote Reservoir, Drag Valved — $1375

-- GM 4T65 Auto Race Transmission with K Series Adapter Plate and 2nd Mockup Transmission Case — $2500

-- Precision 6265 Journal Bearing Turbo, T4, 0.81 A/R, S Cover — $725

-- Weldon 2015 Fuel Pump — sold

-- Bogart 15×10 Double Beadlock Drag Wheels with Dunlop 28x10x15 Tires — $1200

-- Z10 B Series Wet Sump Oil System -- sold

and the list goes on, and on, and on -- check it out here -- http://www.ipgparts.net/blog/general...learing-house/