H22A4 Shortblock:




2001 H22A4 Shortblock. The block was attained from a Honda dealership in 2001. It was a warranty exchange on a new prelude that had a blown head gasket. Coolant leaked into one of the cylinders. The block just needs a simple bore/hone and its good to go. It comes with main caps, main studs and main girdle. I've had it for over a decade and unfortunately, I never got around to using it.

Asking $300 ($425 with the crankshaft)

2001 H22A4 Crankshaft:



This crankshaft came out of the block I am selling. It is in excellent condition, no journal imperfections at all. It has been stored properly for as long as I've had it. It just needs to be micro-polished and it's good to go.

Asking $150 ($425 with the block)

Nuforms Rear suspension components:



This is the complete Mount/Bracket/LCA/Trailing Arm/Stabilizer Arm/Hardware kit/set from the Nuformz rear suspension kit for 92-00 Civics and 94-01 Integras. You just need to add your own struts from Stange, AJE, Lamb, etc, your own wheels and you'r good to go.

Asking $500

All prices are + shipping. Paypal accepted + 3.3%.

PM me if you are interested.

 

wiseco 81.5 9:1 compression pistons probe connecting rods for ls/b20. $225 shipped.


speedfactory 4bar map $65 shipped.
complete b16 head blox springs/retainers gsr cams/blox intake manifold

 

Cleaning out garage. Sold car these parts were going in, so I'm putting them out there.

K20a2 Block w/CylinderSupportSystem installed
K20a2 Crank
CP 9.0:1 86.5mm pistons
Scat Forged Rods w/big bolts
ACL Race bearings, full set.
All machine work has been done: B&H, Deck, Jetwash

This setup is easily reliable to 600wHP. $1425 shipped.

 

Prices are shipped in U.S. Pm or text (352)217-9531 John.
B series Competition Clutch stage 5 clutch SOLD!!
Competition Clutch Ultra light flywheel, used for 5,000 miles, resurfaced 1,000 miles ago. SOLD!!


B series ARP flywheel bolts BNIB $40 shipped


Avid billet torque mounts $60 shipped



ID 2000's 14mm top hat 60mm long Brand new one was opened for test fit. $800 shipped
They fit the following vehicles for sure, maybe more.
Audi/Vw 1.8t,2.0t
Cobalt ss
240sx-s13,14,15
sr20det fwd

 

Few items for sale. My name is Jamal and my contact is 337-519-6599.
Text or call is best way to get in touch with me. Was having trouble uploading all pics so text for rest of them if need.

3" Aluminum charge pipe (cold side) with HKS BOV flange $100
HKS BOV $150
B-series Ramhorn Manifold with 44mm flange $400
Black Tial 44mm wastegate with 4 springs $225
Brand new Bosch 044 pump with fitting for weldon filter and -8 inlet $175
HKS Turbo Timer (new model) $75
AEM FPR (blue) $75

 

1994 Honda Civic Coupe. Car was red, I spent $1850 on media blasting 90% of this car with walnut, came out amazing. Car is completely stripped down at the moment, but have everything to make it a running car again including dash, door panels, cluster, all harnesses, subframe, stock suspension, etc. I bought the car for $1900, spent $1850 on the blasting, and know I'm going to take a loss here but I need the car sold.

IF YOU'RE INTERESTED, I also have brand new OEM Honda left and right door skins, and OEM Honda left and right FULL rear quarter panels as well.

Any reasonable offer accepted.

My name is Lou (203) 520-7162. Texts welcome. No tire kickers. You will need to trailer this car home from zip 06483. Thanks!

 

Comp clutch 8026-0420 stag 5 berries hydro New 310 shipped-PP

 

Parting out the parts I was gathering for my build. Best way to contact is PM. Quicker response email me at charles(at)topendusa.com

-custom wiseco heavy duty 1400hp pistons with upgraded pins bnib no wait $600shipped



-Web H22 Pro series Cams and Rockers with spacers bnib $2500 shipped



-MSD Digital 7 with RPM rev box $475 shipped



-Tilton clutch flow valve bnib $125 shipped

 

805-302-1307

B series
Skunk2 Pro2 cams
$400



Skunk2 cam gears
$100

 

Arias pistons $400 shipped

 

For questions Or purchace on items for sale Pm or Text (775)527-9523

BWR Twin Scroll Top Mount
Dual 44mm Gates

Manifold is brand new never been mounted. Just taken out of the box for a quick photo snap.

$850 Shipped


TurboSmart Comp Gate 40

These are also brand new never use or mounted. Just taken out for the photo snap.

Would like to sell as a set but if i get seperate buyers for each will seperate.

$600 for the set Or $300 each Shipped

 

Selling brand new H22 Manley rods. Part # 14016R6-4 $650shipped

 

GM 3bar map sensor-$35
d16 cast log manifold-$50
Greddy profec b spec 2 boost controller-$175

Everything is obo

 

sold

 

MH 26x4.5x15 just the tires good condition $200 for both ship


LS vtec golden eagle sandwich plate with 6an line and fitting and 4an fitting for the turbo line $90 ship

 

whats up h/t i have a st of mickey thompsond 24.5x9x13 for sale asking 450 obo they have bead lock screws and inner tubes you can call or text me at 321 202 8101







owCiv/slicks006.jpg[/IMG]

 

Posting for a friend.. Any questions, contact scoop here on honda-tech..

Fs.. Brand new never used comp turbo (72mm) 4272 (72/77) triple ball bearing billet wheel T4 1.15 a/r.. $1800.00

 

sold to grjp1988

 

Distributor not included

Used ( under ~100 miles) Crane Cams Fireball Hi-6 Ignition Box with LX92 Coil
$265 Shipped CONUS
http://www.summitracing.com/parts/CRN-6000-6445/


Used MSD 6A with barely used ( under ~100 miles) SS Blaster Coil
$120 Shipped CONUS
http://www.summitracing.com/parts/MSD-8207
http://www.summitracing.com/parts/MSD-6201/


Both for $365.00 Shipped CONUS

SOLD ITEMS FOR VOUCHING:
LHT JRSC sold to CW-ITR
Y21 (B16) Transmission - ROTEN_DB8
Hondata S300J - bmwm3csl[ITA]
Exedy Twin Disk - project 2two9
b18c1 block sold to es.roadster
Jackson Racing BTM (Boost Timing Master) and water injection - sold to jonesEK
Full Race, CRX Traction Bar and OBD0-OBD1, VTEC Harness for CRX - sold to jdmjunkieXL
Hasport Hydro B series mounts for CRX - sold to 4LugR
440 rc injectors - PogKai
SAFC - Jed Atreides
Skunk2 Coilovers - Stevoh
Fiber Images Carbon Fiber Hood - jasonb
1k cc injectors - JDM H2B EK
Wiring Harness, bracket, and shift linkage-jdmjunkieXL
tial 38mm wastegate - Bizarre

 

2003 K20A2 Cylinder Head MINT Condition, Complete Head, Cams, Cam Gears, Rockers, VTEC Solenoid, Sensors, Everything but the valvecover. Priced to move $575 Shipped!

 

Selling my version 1 EMS.

Will fit all OBD2A hondas. Please google to make sure it will fit your car before you buy if you're not sure. I will not refund you if find out it doesn't plug in.


$600/obo

text me if interested 763-443-9051

 

1994 Integra drag chassis, alot of work has been put into this car and alot of you know it when I had my last rebuild thread. Chassis will include

Exospeed 3 piece front
Kirkey race seat
custom kirkey seat braket
Stroud window net
nrg detachable hub
Momo course steering wheel
Carbon race pak setup
T1 race solid state relay battery cut off switch
Moroso switch panel with push button start
Moroso battery box
Brand new 10pt chromoly roll cage, has not been cert yet but will pass with flying colors, very nice cage.
with removable Diest Parachute
The car use to be red and did a complete color change the right way and did repaint the back inside of the car black and complete shaved bay, Cost over $6k
Function form billet control arms
FCS 5 gallon fuel cell
EBC cross drilled rotors and EBC yellow pads front and rear with stainless break lines
all poly urethane bushings through out
Skunk 2 upper control arms
Carbon creations carbon rear hatch
brand new windshield.
etcc...... im sure im forgetting things but you get the point
does come with new bumper lights and I only have one headlight.

$5500 OBO ( or best offer!) Might be open to trades, do not offer me any junk parts etc.. thanks.
































A few before the partout









The build thread
https://honda-tech.com/forums/drag-racing-36/%2A%2A%2A2011-outlaw-fwd-rebuild-thread%2A%2A%2A%2A-2881630/

Rywire custom harness

setup for C.O.P with AEM epm and much more

$500.00 OBO




AEM epm-$250




AFI twin scroll top mount for B series, uses twin 44mm wastegates $700




CP upgraded wrist pins $50



Koyo rad radiator with FCS over flow tank $150






T1 Vtec solenoid block off plate $40.00




4inch Stainless up pipe with clamp- $150



Have a few more things and will get pics on these other things asap.

 

Sold

 

h22 pistons and rods j/e and crower $500
h22a stock heads $150 each
s2000 oem crank $150
manley turbo tuff rods $500 (gsr)
skunk 2 pro1 cams (new) $550(b18)
quaife b series gear set. complete $2000 obo
aftermaket gears ,shafts,final drive
pics will be up in a bit..you can text 214-576-6367 for quick responses.

 

FS:

Full b20 vtec short block set up

B20b block w/caps-sold
2- ls/b20 cranks-sold
BNIB Acl rod/main/thrust bearings for LS/B20-sold
BNIB Eagle LS rods-sold
BNIB 85mm wiseco pistons +2cc dome with rings -$400
BNIB Golden eagle 85mm ls vtec kit WITH 85mm honda headgasket -$300
BNIB Arp gsr head studs -$100
BNIB Super tech dual Valvesprings and Ti retainers -$250
BNIB gsr water pump-sold
BNIB gsr timing belt -sold
BNIB gsr/ITR oil pump -sold