Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

FS: 6 Gallon 6061-T6 Aluminum fuel cell. Mounts in the stock location and uses factory filler hose and comes with or without OEM sending unit mounts. One has a single -10 AL feed fitting and one has two -10 AL feed fittings in a sump and one -8 AL return fitting on the side. These fittings can be changed for different ones.
Price = $350 without mount for OEM sending unit
Price = $400 with mount for OEM sending unit

 

706-346-6024
matt.stover@comcast.net

MSD Digital 6: $200 Shipped


MSD Blaster SS Coils: $30 Shipped EACH, $50 for Both


Aeromotive Pro Pump - Flows a shitload
$525



-Custom Forward Facing Turbo Manifold, Selling for someone else, test fitted on my car to show pictures. Fabricated by Joe Simpson at Tempest Racing.
-Friend purchased it and then shipped out to Japan in the USAF...
With 4" SS Downpipe
Flanged for 60mm Tial
$875.00 OBO!!

 

I had a daughter and this summer I realized my priorities and goals in life have changed. I have owned the car for 10 years and it been a project since. It has a weld in ten point cage, Lighter/Faster sunroof plug, VIS carbon fiber hood, ETD tracking bar, Skunk2 drag coilovers, sumped tank, and relocated battery. It has the factory dash, door panels and head liner. It doesn't have seat, heat or a/c behind dash, gauge cluster or steering wheel. Asking $1200. I check my pm's often or you can text me at (603) 724 0164. Bobby

 

For sale

 

FS: (two) Bosch 044 pumps and MB racing pump hanger bracket and J-racing check valves. Paid $700+ asking for $475 shipped. -8AN inlet and outlet pump fittings are included.





FS: Accufab 75mm (at plate) throttle body. Fits the standard Mustang flange. Brand new. $250 shipped



FS: Pair of Weld Racing 15x10 with 6" backspacing. Mounted drag radials for dyno stuff only. No track hits on these. Like new. $600 shipped SOLD

FS: Custom A2W Intercooler with 2 Garrett 1000hp cores. Also includes ice/water tank, all -16AN AN hoses and Meziere dual outlet 55gpm pump. Coated in non sweat coating. Stays dry even with ice in the tank and 100+ ambient. Pay the asking price and I'll throw in the Tial 50mm BOV. $1100 shipped





FS: Fal Civic fan. Works perfect. $100 shipped SOLD

FS: Homemade catchcan. Works great. Used it for a few years. -12AN fittings. Used in battery location. $75 shipped


FS: Full Race traction bar links. Comes with bolts, washers and nuts. Cross bar NOT included. $50 shipped SOLD

FS: D2 Laser ride height sensor. 0-100mm distance. $250 shipped (sorry about the dirtiness)



FS: Motec hall sensor. New and never used. It was a backup unit. $150 shipped



FS: Motec speed sensor. Another backup I have. $60 shipped



FS: Motec single axis accelerometer. Brand new. Yet another backup. $275 shipped SOLD

FS: Prologger WBo2 and boost controller. Comes with brand new Bosch LSU4.9 sensor and all instructions. $350 shipped


FS: Ford TPS sensor. Never used it, but works. Like new. $30 shipped


FS: Black Golden Eagle manifold. Comes with what you see. Has -6AN fitting too. $40 shipped


FS: Battery cutoff switch. 200amp capacity. $40 shipped


FS: Avid Racing GSR water outlet adapter. Never went into full production on these. -16AN fitting. $60 shipped


FS: RPM Services 70mm throttle body. Comes with 3" Wiggins clamp assembly. Honda flanged. $125 shipped SOLD

FS: Wiggins 3" clamp assemblies. Both are in great condition. 2 for $130 shipped or $70 for just one shipped


FS: SLS custom B-series spark plug cover. Anodized in 3D violet just like the Tial stuff and the Wiggins clamps above. $100 shipped


FS: Skunk 2 Battery tiedown. No damage and like new. $30 shipped



FS: Spal ultra thin 13" push fan. 920CFM. $40 shipped SOLD

FS: Custom 3.5" Aluminum DC2 exhaust. Uses Magnaflow 3.5" muffler and Vibrant V-bands. Sounds awesome! Rather not ship this. $400




FS: 2000 GSR shift linkage. Mint condition. $150 shipped


FS: BFG Drag radials. Like new and still have nubs on the tires. 225/50-15 $225 picked up

 

I bought my dream car, a MKIV Supra, so I am selling all my remaining parts!



B-Series Honda T3 Ramhorn Turbo Manifold.
Brand new, NEVER used. Tig welded 304L stainless schd40 runners.
Premium CNC'd ported head flange!
T3 turbo flange.

***Wastegate primary flange WILL BE added once buyer states what wastegate they will be using on this manifold***

What you see is what you get!
Asking $690 OBO!!!!! SHIPPED . THANKS!

 

Got Spinwerkes 15"x3.5" skinnies for sale
They are 5x114.3 Lug Pattern
Skinnies were just mounted but none were ever used.
They fit on my RSX and I'm sure they would fit and 06 and up SI along with an ITR probably.
Selling because I decided to change up my wheels
$500 OBO, message me on here as I check frequently. Thanks

 

Motor assembled and tuned by speedfactory
Engine: 5000
Golden Eagle Sleeved B18C1
84.5 mm Arias Pistons*
BME Forged Aluminum Rods
Upgraded Rod Bolts
ACL bearings Calico coated rod bearings
Stock port GSR head
Ferrea 6000 series valves
Ferrea valvesprings & retainers
Skunk2 Pro1 cams
Edelbrock Victor x IM*
Blox 68mm TB
Fluidamper
Complete from valve cover to oil pan
Serious Inquires only please send text to
253-777-7341

Competition Clutch Twin Disc w/flywheel -Sold
Golden Eagle fuel rail, aeromotive fpr, with gauge -160
tail q blow off valve - 150
DSS 5.9 axles no hubs -850
1300 Garrett intercooler custom end tanks -600
67/68 HPQ precision turbo 1.15ar divided housing -900
T1 catch can with vented valve cover -10an lines - 300
koyo radiator spal fan- sold
Bogart Pro 4 front and rear with slicks 24.5 and
skinnies - Sold

 

72mm GT42R ball bearing 1.15A/R still usable needs new exhaust wheel or rebuilt $1200obo



AEM PN:30-1060 OBD II brand new never used $600


Skunk2 Racing B-series radiator hose kit like new $80

Skunk2 Racing billet vtec solenoid like new $80

MSD coil p/n8253 $80

Brand new Evolution Industries b-series light weight flywheel 11.5lbs $160

Used Moroso battery box only $75



Used Garrett T4 1.28 A/R housing for all GT42 and GTX42 $320

M&H 26x8.5x15 Slicks ONLY like new $275

 

Brand New still in the packaging!

B Vtec Springs $130


B Vtec Ti Retainers - 175


B Vtec Black Nitrated Std Size Flat Faced Valves (8 Intake, 8 Exhaust) $200


Once again these are all BNIB


ARP GSR Head Studs (Installed, never torqued down) $100
PM if your interested

 

Used precision 66mm waste gate. Comes with both flanges for manifold and dump tube. I have most all the springs that will be included with sale, swapped out for a Tial 60mm.

325 obo

 

Ported and Built GSR Head For Sale
Price - SOLD!!!!!!

Head has the following and was ported at M2 race systems and assembled at Headgames

Port and polish
Toda dual springs
Toda retainers
ferrera valves
bronze valve guides
5 angle valve job
cam caps
rails
rockers
vtec solenoid
valve cover
all the bolts

i would just get the head resurfaced has some little knicks on the surface

 

gsr arp main studs $100 shipped

obd2b to obd1 75

ef cable b series mount 100 obo

gsr mainshaft.-make offer

 

Selling a used set but in great shape arias 84mm pistons(piston rings, wrist pins included)for Bseries 9:1cp 300 plus shipping and Paypal

 

1988 Honda Crx drag car shell.
Shell includes one piece fiberglass front end,complete cage and wheelie bar setup with parachute mount, lexan windows, racing seat with harness, 5" tach ,temp gauge,front traction bar setup, interior is gutted and the car is very light. $1800 obo jason 530-515-9268

 

Contact:
253-238-0700
E-mail: Tony@facetuned.com
paypal: Tony@facetuned.com
Buyer pays Paypal fee's!!!!!!

MSD DIGITAL 6PLUS / HVC II COIL / B-SERIES VTEC DISTRIBUTOR AND CAP

ASKING $520 SHIPPED.





ARP B18C HEAD STUD KIT BNIB -
$125 SHIPPED





EG , DC , EK K-SERIES INTAKE WITH FILTER

$50 + SHIPPING





B-SERIES ITR VALVE COVER

$100 SHIPPED




BOOST BY GEAR SOLENOID
$50 SHIPPED




HONDATA S300 V2 - come's installed in p28 ecu with all Boost by gear components installed.

ASKING $550 + SHIPPING





Call or email the shop any time!

__________________

 

Dual Bosch 044 fuel pumps with MB racing dual pump brackets. One pump has inlet and outlet fittings....$400 shipped.





FAST wideband controller w/ sensor....$100 shipped






FJO injector driver....$50 shipped

 

-Shipping not included
Custom fuel setup for sale. $700 obo.
Oem Sumped EG gas tank with 2 -10an outlets.
Aeromotive a1000 fuel pump with relay.
2 Aeromotive inline SS fuel filters(pre and post pump)
-10an steel braided feed line
Aem Fuel rail with fittings, matte black.
Just needs return line made, and FPR to be functional.




H22a Valvecover Powdercoated "shimmer candy purple" by Billy Hoang. With 4 -10an fittings for catch can setup. $150



Oem Bseries GSR Valvecover black $80

 

Aem coil on plug setup complete for b series. New never used just mounted. $600 shipped not a penny less!!!

 

FCS 5 gallon fuel cell. mounted but never filled with gas has -10 feed and -8 return. comes with oem fuel level sender. 450.00 obo please email me wesleyleszto@hotmail.com thanks.

 

FS: bnib wiseco pistons. for h22 11.5 to 1 cr. 89mm bore 350 shipped

best way to contact me: 814 937 1234

 

Location: Macungie, PA
Will not ship fuel setup or radiator

Shitty Fitting ChaseBay Harness -- $10,000
k-coils/epm/boost/ some random place for a fan switch






MSD Digital 6 -- $200


Dual Bosch 044 setup -- $500
-Aeromotive fuel pressure
-Kinsler Stainless steel Fuel filters
-Aeromotive Y
-Custom Fuel rail
-Lines (some wear)
--8an feed to pumps
--10an feed rail and FPR
--8an return


Twin Fire with CBR coils -- $350


Fluidyne radiator $150



B-Series Scatter Shield $100


Kill Switch Setup (what you see is what you get)

 

S.P.E.C. Carbon Twin Disc Clutch and flywheel still in the shrink wrap from S.P.E.C. Includes extra discs- $1,600 (This is the super twin not the much cheaper mini twin. Retails for $2,900.)

 

Hello im selling these brand new performance parts of my K series set up that i never got to do. Due to the fact that things changed in my life and now im becoming a father. So i have to sell these parts. THESE ARE BRAND NEW NEVER USED

injectors 1600cc are used so $200 firm
AEM boost solenoid used $50 firm
Precision 6262 new $999 firm reg price $1075
ATI damper new $350 firm reg price $375
Tial 44mm wastegate new $345 firm reg price $362
Tial 50mm BOV new $235 firm reg price $259
Competition Twin Disc clutch $1,000 firm reg price $1150