22x3.5 15" mh rear tire. Just the tires are for sale
These are new just mounted
200.00 + shipping

 

Couple things for sale......text me @ 214-576-6367 (pics up soon or text pics)
Manley turbotuff rods (gsr) $500
T1 pro 10 ignition kit $550 Harness included
Hondata s300 w boost $500
skunk 2 drag suspension $600
Fully built type r head Ferrea valvetrain $1200
dss 3.9 axles w hubs rated 600hp $700
b18c1 bare goldeneagle sleeved block 86mm (all motor)$1000
Tial 44mm wastegates $250 each
Gsr head Ferrea valvetrain came off 800hp motor $900

 

Kens Kustom Chassis (chrome moly) chute mount (never used). $80+shipping

 

sold

 

Sold

 

I have AFI forward facing twin scroll T4 manifold one year old. Does not included wastegates. $900.00 plus shipping and paypal fees.


Precision W/A 1000hp core one side with 3 inch inlet then 3.5 outlet will include water tank and Jabsco Pump.
$700.00 plus shipping and paypal fees.

 

Bought new pistons, so I have no use for these. They are D16 75.5mm, 8.5:1 cpr. Great condition. They have some slight wear on the skirts. Rings are in great shape. One made slight contact with the cyl head, it can be seen on one edge. Will not effect the piston at all. Asking $200 + shipping. OBO

These pics are with no clean up. Pulled from the engine, took pics, and put them in a box. I can clean them up if needed.




Cyl head contact.



PM me any offers, or for a shipping quote. Thank you for looking

 

Quickest reply is through email: bearclaw87@comcast.net
I am located in NW GA.
DSS 3.9's for B series $450 shipped (axles only). Passenger side had the bar and outer joint replaced in April by DSS, Maybe 10-15 passes on it since rebuild.


B series hydro tranny with Type R gear set, 4.4fd and a b16 sized Quaife LSD. $900 shipped

Turbosmart Supersonic BOV with flange $125 shipped.


Golden Eagle Headstuds, torqued once $75 shipped.

Tial MV-R 44mmwg All flanges, clamps, bungs, plugs etc... $250 shipped.

Golden Eagle IM gasket for GSR $25 shipped.

MSD Digital 6 $150shipped

Weldon FPR $200

 

FS:
motec m4 clubman with obd1 adapter harness $1600

garrett gt 3782 core, NEW $600

exedy hypercarbon for K20 might need a rebuild, $350

shipping not included,

thanks

 

I got the following parts for sale!

All prices are firm/ buyer pays for shipping and paypal fee's!

contact: email - Tony@facetuned.com
253)224-1792
Tony



1 - blitz bov


2 - Turbonetics 57trim brand new zero miles - 500


3 - precision FMIC good for 600whp - $300
has elbow for a backdoor setup with 50mm bov flange.


4 - 1 set of PTE 1600CC asking $250

 

FS Jegs c02 bottle kit with extra c02 bottle...
200.00 shipped
check link below to look at kit this one was used 2 races.....
http://www.jegs.com/i/JEGS-Performan...205K1/10002/-1

 

for sale b16 knife edge eagle crank. has about 2 dyno hrs on it. 450 shipped

for sale 1994 acura integra, golden eagle sleeved b16. crowler turbo tuff rods, wiesco pistons,gt4088,custom turbo kit,skunk2 drag coilovers,full interior,gsr trans with ls final,quaife diff, custom front hubs with accord axles. custom rear hubs with 4x4 1/4 lug pattern and skinnies. all new motor mounts, innovate with avid tq mounts,full energy bushing kit, same motor in my race car made 750+. this one will have no problem doing that. walboro 400 fuel pump, aem ems with cop and t1 trigger or s300. depends on price. many more pics of car and info if intrested. will only part if whole swap is bought. car is still being put together at the moment but ran out of money and need to get race car done. pm for more info. 8000K takes hole car. 6500k takes whole swap

 

Kseries Hondata 4bar Map Sensor

i am asking 75$ for it, its practically new barely used

 

Drive Shaft Shop 5.9 Axles for an EF (Civic/CRX).
These are fairly new. They have dyno time and maybe 3 track passes on them.
And yes they come with the hubs and extended studs. I know they are not pictured in the second pic. I can also include a stock halfshaft for a little more if needed
$1150 shipped

 

No rush to sell, just gauging interest.

Engine
Ls/Vtec
83mm benson sleeved block
gsr balanced and micropolished crank
Eagle Rods
83mm CP Pistons 9:1
Commetic headgasket
ARP headstuds
SuperTech 0.5mm over sized valve springs
ITR cams
Moroso Oil pan
Edelbrock Intake manifold
Golden Eagle ls/vtec conversion kit

Turbo Kit
Peakboost top mount b-series manifold
Peakboost 3in. downpipe
Peakboost 44mm dumptube
Precision 6765SP Turbo t3
Precision 46mm Wastegate
Custom 3in. charge pipes
31X12X4 bar and plate intercooler w/ custom single backdoor setup
S.S. oil feed
-10 a.n. Oil return


Fuel System
Sumped Tank (dual -8’s)
Dual Bosch 044’s
-8 an line from tank threw filters, then pumps, the “Y” together to filter and then -10 to fuel rail
STR anodized fuel rail
Bosch 1600cc injectors
-8 an return line

Electronics
Hondata S300
Boost Solenoid for BBG
Sony Cd Player
PLX Wideband O2 (integrated into s300)
Oil pressure gauge
M&W Pro 10 Ignition (T1 package)
omni 4 bar map sensor

Chassis
2000 Integra gsr Black
Great overall condition with a few minor door dings
Leather GSR seats (comes with rear seats but they wont work with roll cage)
10pt Roll cage
Tokiko Illumina coilover setup
S.S brake lines
EBC Brake pads
Full-Race Traction bars
Avid Motor Mounts (stiff bushings)
Skunk2 Short throw and shift ****
Aluminum Radiator and Fan

Drive Train
C.C Twin disk
Stock gsr gearset with Quiafe
Drive Shaft Shop 1000whp axles and hubs (stage 5 old version)
ARP extended wheelstuds


Car has run 10.4 @ 142 with a shitty 1.7 60'. The only issues I can think of is the car needs to be professionally tuned for driveability. It is well dialed in at the track. It has easy 9's with some new slicks and coilovers. Asking $8500.00. Car is located in Little Rock, Arkansas.

 

gsr eagle rods, 500 miles, no damage, just went to an ls crank/rod setup

$220 shipped

aem 1040 box $560 shipped



fluidyne half width radiator b series with samco hoses $240 shipped

 

All parts are used, Treadstone was only on for a month and i'm changing my setup so i can't use it anymore...


Treadstone TRV25S Intercooler... $350 Shipped in the U.S.
• 3" Inlet/Outlet (same side)
• Overall Size 26.50" X 12.00" X 3.50"
• Core Size 25.00" X 6.00" X 3.50"



GReddy Intercooler (RSX)... $200 Shipped in the U.S.
• 2.36" Inlet /Outlet
• Overall Size 27.00" X 7.00" X 3.00"



Walbro 255lph Fuel Pump... $50 Shipped in the U.S. (i do have a brand new install kit also (+$10)



MSD 3-Bar MAP Sensor w/weather-tite connector... $40 Shipped in the U.S.



Greddy Type-S BOV (will include flange if needed)... $75 Shipped in the U.S. (sprayed with a metallic black paint)

 

What's up everyone? I am selling my Headway Performance k series dog box. It has about three races on it. It is a 5 speed w/handcuff. It will come with oem 4.7 counter shaft and shaft bearings. So both shafts will be complete. It is just the gear set this is not a full transmission. Its just what you see in the first 4 pictures. I am asking $5200 w/handcuff or $4700 w/o handcuff obo
Please email me for more info or pm me
tim@timgreyracing.com
Thanks

 

MEZIERE water pump idler b18 b16 $100 firm





rsx k20 STRUP header $200





rsx k20 bottom mount turbo manifold t3 and 38mm flanged with used ebay turbo unknown condition $140 for both





zex 10 pound bottle $125


412-861-1996 call or txt before 10pm no emails please

 

FS: h22 RMF header $275 obo

Darron..919-801-0949

 

Strada 3 piece front end many hours in to making this thing straight and wave free. $700+shipping

 

86 mm sleeved ls block dart sleeves. (bare block)
asking $ 850

located in jamaica ny.

631 492 0994
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

 

PCS D200 dash used in great shape barnd new harness....
500.00 obo....

 

Used PRB KPRO ECU $925ea Shipped

Kpro to racepak IQ3 EFI Module $300.00 shipped

 

Competition Clutch Super Single

-B Series Transmissions

-1500 miles (on stock h2b)

-fantastic condition!

-$795 msrp


$ 580 Shipped ups ground

Email/text
770-337-9575
justinsemon@yahoo.com