Precision Billet 7275 with 1.44 or 1.12 housing T4 flange. Compressor cover is now POLISHED. Asking $ 2100 OBO. This turbo has very little run time on it, has gone 8's lol...

 

13to1 ls race block 81.5 z10 girdle all new Honda bearings has 1 full season on it wiseco pistons eagle rods still running in car if u want to hear it start
has new honda oil pump with new pick up wintage tray and oil pan need $2000 obo

bisimoto v2 header paid $850 sell for some where around there like 720 obo

2 Nos direct port Nos kits i have alot of extra parts and jets 450 a set

Id 1000 cc furl injectors only a year old with blue top for b motors $450

brian crower B18- b16 turbo 2 cams $330 i ran them a year ago make a good all motor cam or turbo or nos cam

NEW honda OIL FILTERS 3 FOR $10 (i have 3 boxes of them )

inline pro gsr intake manifold looks like the golden eagle manifold but the intake runners and different $600

skunk 2 pro 3 cams for a b they have about 7500mi $500
nrg tech miller cams with roller rockers
cam specs on the the ferrea web page $1900

IF U HAVE ANY Q TEXT at 856 332 5450

http://www.youtube.com/watch?v=7gIStWwPSo8

 

BEP 72mm/83mm turbine/1.10 550$
AEM wideband 80$
Dimond racing 13x10s 5in BS 200$
Aeromotive regulator 80$
C02 w/reg 120$
brand new eagle LS rods 300$

 

S375 For Sale

New, only set on header to check fitment. 1.10 A/R T4 turbine housing, standard 9" compressor cover, 75mm compressor wheel, 83mm turbine wheel. Great turbo!

Asking $900 OBO

 

GSR head supertech Valves/springs/retainers 550$
Hassport mounts bseries EG/DC have SOLID inserts installed 250$
Supertech pistons 81.5 10-1 comp 350$

 

im selling my k series dss 5.9s that i had on my integra..they have about 20 track hits if that ...still in flawless condition...they are coming with the hubs arp studs and the axles...everything u would get if u would pay the 1800 to dss...im asking 1200 obo...u can reach me at 305 281 6495 ryan...

 

SOLD <script src='http://img850.imageshack.us/shareable/?i=51966975.jpg&p=tl' type='text/javascript'></script><noscript></noscript><script src='http://img593.imageshack.us/shareable/?i=92695405.jpg&p=tl' type='text/javascript'></script><noscript></noscript>

 

99 D16y8 Head $100


92-00 Civic Innovative Mounts Rear and Trans mount $100



P28 Virgin Ecu $80


Aeromotive Fuel Sample valve $40.00


Earls -10 in/out mini Filter $35.00


STR Blue Cam Seal (old School) $10.00


BDL B-series Fuel rail $65.00

 

Iam selling my turbo setup as a Partial turbo Kit. You will need an Intercooler(Bakdoor Would work better), dumptube, Intercooler Piping. I was going to use this setup to make 600 WHP on a stock sleeve block but I lost Motivation and Im wanting to buy a truck. All these parts are good quality and brand name.

Iam asking 2000 OBO I thougt that was a good/fair price. I will Not part it out. Shipping will be Extra plus paypal fees.


Onto the list:

- Brand New, never seen exhaust, only mounted. SLS Topmount manifold, Vband outlet Tial Flanged, 44-46mm Wastegate.

- A 3-4" Downpipe custom made to fit this setup, Looks CRAZY!!!

- Brand New TIAL 44MM Wastegate(SIlver)I bought it from Full-Race, has scratches on the top from where it was stored wrong at one point but its never seen exhaust Don't remember what spring is in it.

- Garrett GT3567R has a 67MM Inducer Wheel, Has A Brand New TIAL Vband Housing .82ar(MAKES LIFE EASIER-NO BOLTS) its Ball Bearing, has between 55-6500 miles, I had it inspected by ATP Turbo not to long ago, I have a copy of the results, Its in great Condition.

PICS PICS:

http://i1093.photobucket.com/albums/...5/IMG_0251.jpg

http://i1093.photobucket.com/albums/...5/IMG_0252.jpg

http://i1093.photobucket.com/albums/...5/IMG_0253.jpg

http://i1093.photobucket.com/albums/...5/IMG_0254.jpg

http://i1093.photobucket.com/albums/...5/IMG_0255.jpg

http://i1093.photobucket.com/albums/...5/IMG_0270.jpg

http://i1093.photobucket.com/albums/...5/IMG_0268.jpg

 

Complete B-series trans with PPG gearset and Quaife diff-$5700
Just PPG gearset-$5000


Full-Race Prostreet turbo kit with T3/T67 H.O. $2600
This kit has made 780whp!


Full-Race topmont T4 with precision 46mm wastegate and PWR 24x12x4 intercooler, ic piping ,3" downpipe and tial blowoff valve -$1500


Full-Race ramhorn T3 with tial 40mm wastegate and Vibrant 24x12x3.5 ic piping,3" vband downpipe,and tial blowoff valve -$1500


T1/gforce shifter kit $900

AEM 1040,1050,1060 -$700 each


T1 tigger kit with shielded harness-$450

MW pro10 kit- $750

Aem driver box -$200

Precision 1600cc -sold

Type r cams -$400

Fluidamper street-$300

sumped tank with dual bosch 044s and lines to the rail -$old

Turbo xs quad stage boost controller-sold

Avid solid mounts eg-$275

Competition clutch twindisk -$900

B16 tranny guaranteed to shift -$750

Brand new DSS 5.9 axles with hubs-$1200

used DSS 5.9 axles with gsr spindles-$1200

Exlie boost controler -$300

Z10 traction bar -$200

Pics and more parts coming soon

 

parting out the race car need to unload these parts all prices are obo and +shipping contact me though text/call 515-360-7331 or pm i will up date this cuz i know im missing alot of stuff on the car so if you see somthing text me and ill get you a price.


SHELL IS FOR SALE ALSO MAKE AN OFFER
Im just going to throw some pics up if you want some of the parts just text me
CX wheels with brand new tires look just like the back ones-$150
ebay dual core radiator and slim fan with shourd-$175
agx front shocks with 12k springs with some kinda of aftermarket rear shocks with 18k springs went 137mph on these-$250
LS-V ARPs $50
gsr moroso oil pan has been fixed from a rod hitting the edge were it bolts up it made just a pin hole and it doesnt leak-$75
auto meter 5''tach-$50
GSR hondata intake gasket with extended studs-$40
GSR head stock port v-tec lockers rocket motorsports valve springs and ti reatainers tunred 9600k no problems and still making power-$650 OFFER
4-puck act used put has some life in it-$125
knock off 50mm bov works great-$50
turboxs quad boostcontroller tapped for push lock fittings will come with the ones in it-$150

MOST ALL PARTS HAVE ABOUT 8 PASSES







this is to show the arps

heres and idle vid to show how the car idle with the lockers

 

sold

 

Turbo XS quad stage boost controller-$150

 

Name: Ryan
Location: Raleigh, NC
Means of Contact (PM? Email? Phone?): Pm and or text 267.980.6980
Miles: 9,000
Price:$3,200 without moroso pan and Type R cams- With($3,500)

Motor:
Laskey Built
Benson Sleeved 84mm B16
Benson Micropolished crank
ACl bearings
Arp heads studs and main studs
9.1 CP Pistons
Eagle rods
Cometic head gasket
Head done by portflow
Supertech nitride valves
Supertech springs/retainers
Competition 3 angle valve job
BDL cam gears
Motor is blueprinted

I am contemplating parting out my car. If motor sells then the rest will follow!
http://hondamarketplace.com/showthread.php?t=3012003

 

92-93 Cable trans...includes the following:

- 2000 B16 1,2,3 gears
- 94-95 gsr 4th gear
- Pro Drive ring and pinion (4.7 FD)
- Phantom Grip cuff ( 5th gear delete )
- Rod Moore Spool

$1200 obo

 

AEM EMS 1070 (k series) perfect working condition $500



ef hatch autopower 4 pt roll bar. $350

 

Well is time to part my car out your gain my loss everything is obo plus shipping
For faster response call or txt 203-650-0433

Bmc 3 piece intake manifold powder coated matted black with 90mm accufab TB previous owner was jose jimenez from Texas sold

T1 cam trigger kit with intake cam gear black 450 obo
Modified to fit ram horn and top mount with s372
DSS 5.9 with spindles sold
Moroso oil pan 100 obo
Aem series 2 30-6060 BNIB 900 obo
Aem series 1 1020 box will include rear
Wheel speed sensor and it's set up for t1 trigger 650 obo
Aem cdi box with cbr coils dr-25 shrink and all dtm plugs BNIB
Never used only for mock up 550

 

Exospeed 3 piece 13x9 5inch backspace front set barely used RIMS ONLY - $600 plus shipping

Rear V2 15x3.5 rims ONLY I had them polished - $300.00 plus shipping

Located in SoCal contact me via email at sheepey85@hotmail.com

 

Brand new in box NGK spark plug wires for B series vtec engines
-$40 shipped



Brand new MSD distributor cap and rotor kit for GSR (to accept an external coil)
-$40 shipped



BNIB Skunk2 PRO-series 70mm throttle body for b/d/h series engines
-$250 shipped





Weld Magnum, essentially brand new. Alot of money in these wheels, centers are BRAND NEW from Weld, and the barrels were professionally polished inside and out by CCW. Never used since restoring them. will come with stock grade 8 bolts, not ARP's in the pictures

15x10" 6" backspace

$750 shipped/paypal'd .. buying these wheels new are $419 EACH plus shipping

(wheels are now all assembled correctly according to weld. 25ft/lbs, with red loctite)







Custom dual backdoor intercooler. Garrett core, and is used but in good working condition. Has a few dents and dings, but was told it is in perfect working order. Overall dimensions are 35"x13"x3.5" (core is 24"). 3" inlets/outlets

$350 (+shipping/paypal)

 

b18 Comp Clutch-8017-1620

stage 4, 6 puck sprung.
Bought for a customer, he never showed. BASTARD! lol

My loss your gain.

$325 shipped! OBO

 

top mount t4 divided manifold
dual wastegates (does not include wg)
asking 850





full race 4" thick dual back door intercooler
asking 650



95mm eagle crank 450 obo





lenso 13x8 with 25x8.7x13 asking 450 obo (perfer pick up)
has minor scratchs on on slick - on the last pic from front fender

 

Call/Text Joel 909-728-9967

$1800 SHIPPED OBO GSR BUILT for BOOST BOTTOM END Good for 450whp Beyond that I have no physical proof, but w/ A DAMN GOOD TUNE I SUPPOSE.

IT WILL BE FULLY ASSEMBLED shortly

- B18C1 0 Miles on setup
- New formz block guard ( Custom Machined and chamfered extra coolant ports )
- Full floating LS NPR Low Comp Pistons ( 81.5mm Custom C-Clip Groove by RS Machines )
- New Wrist pins w/ JE c-lips
- NPR Piston rings 81.5mm
- Scat H Beam Rods w/ ARP Rod Bolts
- ACL main & rod Bearings
- New OEM ITR oil Pump
- New OEM ITR water pump
- New T-belt
- New Oil Pick up
- New oil pan gasket
- Hot Tanked
- Decked
- Bored 81.5mm
- ARP Headstuds
- Crank Balanced and Polished

ILL WORK ON BETTER PICS!!!!!!!!!!!!!!






$1500 Shipped OBO EVERYTHING YOU SEE HERE IS ALL FRESH 0 MILES NO START UPS!!


Built B16 Head 0 miles
- Port by KG
- Full port & polish
- 5 angle valve job
- omni dual valvesprings
- omni valves & retainers
- bronze valve guides
- blox stage 2/hsl cams ( lobes are same as skunk2 H8's )
- aem black cam gears 5bolt new
- hot tanked & magnafluxed
- new seals
- oem wrinkle valve cover
- thermal IM gasket
- password jdm cam seal triple-o
- brand new oem b16 vtec solenoid ( subtract $250 if you do not want this )

 

I have a brand new Precision Ball bearing turbo, it is the 4276R turbo with a 1.44AR housing. The turbo has been mounted but never seen oil or start up. I am asking 2800 and that will be with shipping and paypal fees included.

if interest please text or call, i am not on here as much anymore so...323 246 9570

I also have a racepak egt setup that is brand new, aswell as the aem interface cable to connect the racepak to the aem.

 

b18c1 ARP main Stud kit $65+ shipping and paypal.

 

Seller: Larry Sama
Location: halethorpe MD(Near UMBC college)
contact: email@ larrysama@gmail.com
Cell: TEXT ONLY at 704-430-8870

PRICE: 2200 OBO any low ball offers will not be replied to...i have all high end parts and have looked at other prices. I feel my price is fair, but am willing to work a little on the price. Would like to make this sale this weekend.


Up for sale is a fully built ls bottom end. the detials of parts are listed as follows:
LS bottom end-
84m GE Sleeved
Weisco Pistons, ceramic coated 9:1
Manly Turbo Tuff Rods
Micro polished crank
Z10 engine girddle
morosso oil pan
o ringed
includes fittings for catch can drain back
less than 2000 miles